RS12005FL thru RS1210FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.2A Features • • • • • • • • Glass passivated Fast Recovery rectifiers Very low profile - typical height of 1.0 mm Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGA (SOD-123FL) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol RS1200 RS1201 RS1202 RS1204 RS1206 RS1208 RS1210 Unit 5FL FL FL FL FL FL FL Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load VRRM VRMS VDC IF(AV) IFSM 50 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics Parameter Test Conditions Symbol Maximum instantaneous forward 1 .2A voltage Maximum DC reverse TA=25℃ current at rated DC TA=125℃ blocking voltage IF=0.5A,IR=1.0A, Maximum reverse recovery time Irr=0.25A Typical junction capacitance Typical thermal resistance1) 50 100 200 400 600 800 1000 V 35 70 140 280 420 560 700 V 50 100 200 400 1.2 600 800 1000 V (TA = 25 °C unless otherwise noted) RS1200 RS1201 RS1202 RS1204 RS1206 RS1208 RS1210 Unit 5FL FL FL FL FL FL FL VF 1.3 Volts 5 IR µA 50 trr 150 250 CJ 7.5 juntion to mount RθJM 3.3 juntion to ambient RθJA 67 juntion to case RθJC 25 4.0 V, 1 MHz A 500 nS pF ℃/W Note1):Mounted on PCB with 5.0×5.0mm copper pads,2 OZ,FR4 PCB; www.goodark.com 1/4 2014.02-Rev.B RS12005FL thru RS1210FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.2A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1.Forward Current Derating Curve Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 3. Typical Reverse Characteristics Figure 4. Typical Junction Capacitance Figure 5. Typical Instantaneous Forward Characteristics www.goodark.com 2/4 2014.02-Rev.B RS12005FL thru RS1210FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.2A Package Outline Dimensions DIM A Unit: mm Unit: inch MIN MAX MIN MAX 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2014.02-Rev.B RS12005FL thru RS1210FL Surface Mount Glass Passivated Fast Recovery Rectifier Reverse Voltage 50~1000V Forward Current 1.2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’ s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.02-Rev.B