SGC101B5S Surface Mount Schottky Rectifier Reverse Voltage 150V Forward Current 10A Features • • • • • • • • • Schottky barrier diodes Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 J STD 020 Solder dip 260 °C, 10 s Low profile - typical height of 1.1 mm Heatsink design High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGC SGC (TO‐277) (TO 277) Anode 1 Cathode & Heatsink Anode 2 T i lA Typical Applications li ti For low voltage high frequency inverters, DC/DC converters and polarity protection application. Maximum Ratings (TA = 25 °C unless otherwise noted) y Symbol SGC101B5S Unit Maximum repetitive peak reverse voltage VRRM 150 V Maximum RMS voltage VRMS 105 V VDC 150 V IF(AV)1) 5.0 Parameter Maximum DC blocking voltage Maximum average forward rectified current 2) A IF(AV) 10.0 Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 175 A Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Electrical Characteristics Parameter Test Conditions Symbol 0.60 0.65 0.67 0.75 0.75 0.80 0.81 0.85 0.47 0.52 0.54 0.60 0.61 0.65 0.68 0.75 - 0.1 01 - 20 TA=25℃ IF=10A VF IF=1A IF=5A TA=125℃ IF=10A Typical junction capacitance Typical thermal resistance MAX. IF=2A IF=2A Maximum DC reverse currentt att rated M i t d DC blocking voltage TYP. IF=1A 1A IF=5A Maximum instantaneous forward voltage (TA = 25 °C unless otherwise noted) Rated VR TA=25℃ 25℃ IR TA=125℃ 4.0 V, 1 MHz CJ 240 1) 35 2) 10 juntion to ambient RθJA juntion to lead RθJL Unit Volts mA pF ℃/W Note1)Mounted on FR-4 P.C.B with 30*30mm copper pad area 2)On aluminum substrate PCB with recommended copper pad area www.goodark.com 1/4 2014.06-Rev.A SGC101B5S Surface Mount Schottky Rectifier Reverse Voltage 150V Forward Current 10A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Reverse Characteristics Figure 4. Typical Instantaneous Forward Characteristics Figure 5. Typical Junction Capacitance www.goodark.com 2/4 2014.06-Rev.A SGC101B5S Surface Mount Schottky Rectifier Reverse Voltage 150V Forward Current 10A Package Outline Dimensions DIM HE E D B1 B2 A C L L1 L2 L3 D1 E1 Unit: mm Unit: inch MIN MAX 6.4 6.6 5.6 5.8 4.1 4.3 1.7 1.9 0.8 1 1.05 1.2 0.3 0.4 0.85 1.1 42 4.2 44 4.4 3.52 Typ. 1.1 1.4 3 3.3 1.86 Typ. MIN MAX 0.252 0.260 0.220 0.228 0.161 0.169 0.067 0.075 0.031 0.039 0.041 0.047 0.012 0.016 0.033 0.043 0 165 0.173 0.165 0 173 0.139 Typ. 0.043 0.055 0.118 0.130 0.073 Typ. Soldering footprint Packing Information Packing quantities: 5000 pcs/Reel，12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com 3/4 2014.06-Rev.A SGC101B5S Surface Mount Schottky Rectifier Reverse Voltage 150V Forward Current 10A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou GoodArk product best suited to the customer ’ s application; they do not convey any license under any property p y rights, g , or any y other rights, g , belonging g g to Suzhou Good-Ark Electronics Co.,, Ltd.or a intellectual p third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. g p product data,, diagrams, g , charts,, p programs g and All information contained in these materials,, including algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, y, or other loss rising g from these inaccuracies or errors. Please also pay p y attention to information liability, published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics p y for anyy damage, g , liabilityy or other loss resulting g from the information Co.,, Ltd. assumes no responsibility contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on p these materials or the products contained herein. www.goodark.com 4/4 2014.06-Rev.A