DTGPSU25 SERIES Up to 25 Watts AC DC Desktop Power Supplies Single Output Rev A IEC-320-C14 IEC-320-C8 IEC-320-C6 Size: 3.94in x 2.3in x 1.29in (100mm x 58.5mm x 32.8mm) OPTIONS FEATURES • AC Inlet -IEC-320-C14 -IEC-320-C8 -IEC-320-C6 • Output Connectors • • • • • • Universal Input Voltage of 100~240VAC Single Outputs Outputs Ranging from 5V~48V Low Leakage Current of <0.25mA High Efficiency up to 86.97% Optional Output Connectors Available • Meets EISA 2007/DoE (VI) & EU ErP/ CoC (5) • Short Circuit, Over Voltage, and Over Current Protection • 3 AC Inlets Available: IEC-320-C14, IEC-320-C8, or IEC320-C6 • UL60950-1, CSA C22.2, EN60950-1, IEC60950-1, and J60950-1 Safety Approvals DESCRIPTION The DTGPSU25 series of AC DC desktop power supplies offers up to 25 watts of output power in a 3.94” x 2.3” x 1.29” package. This series consists of single output models with a universal input range of 100~240VAC and output voltages ranging from 5V~48V. There are 3 AC inlets available for this series: IEC-320-C14, IEC-320-C8, IEC-320-C6, and multiple different output connectors are also available. This series has high efficiency and low leakage current, as well as short circuit, over voltage, and over current protection. All models are Level VI compliant and UL60950-1, CSA C22.2, EN60950-1, IEC60950-1, and J60950-1 safety approvals. Please call factory for order details. MODEL SELECTION TABLE Model Number Input Voltage Output Voltage Measured at Range Range Output DTGPSU25x-1 DTGPSU25x-1-1 DTGPSU25x-2 DTGPSU25x-3 DTGPSU25x-4 DTGPSU25x-5 DTGPSU25x-6 DTGPSU25x-7 DTGPSU25x-8 5~6VDC 6~8VDC 8~11VDC 11~13VDC 13~16VDC 16~21VDC 21~27VDC 27~33VDC 33~58VDC (1) 12/30/2015 100~240VAC 5 7.5 9 12 15 18 24 30 48 Output Current Min Load Max Load 3.33A 4A 2.75A 3.66A 2.27A 3.125A 1.92A 2.27A 1.56A 1.92A 1.19A 1.56A 0.926A 1.19A 0.757A 0.926A 0.43A 0.757A Ripple & Noise 100mV 100mV 100mv 120mV 120mV 180mV 180mV 240mV 240mV No Load Output Power Consumption Power <0.075 20W 22W 25W 25W 25W 25W 25W 25W 25W Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Efficiency(2) DoE (VI) CoC (5) 83.08% 83% 85.86% 86.41% 86.35% 86.97% 86.35% 86.97% 86.35% 86.97% 86.35% 86.97% 86.35% 86.97% 86.35% 86.97% 86.35% 86.97% Page 1 of 4 DTGPSU25 SERIES Up to 25 Watts AC DC Desktop Power Supplies Single Output Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Input Current Min Typ Max Unit 100 240 VAC 47 63 0.65 Hz A @115VAC at 25ºC Cold Start @230VAC at 25ºC Cold Start @240VAC/50Hz Inrush Current 65 95 0.25 Leakage Current OUTPUT SPECIFICATIONS Output Voltage Line Regulation Maximum for any input voltage change between input voltage range 5V, 7.5V, 9V Models Variations from minimum to maximum Load Regulation 12V, 15V, 18V Models output current 24V, 30V, 48V Models Output Power Output Current Ripple & Noise Transient Response Recovering to 1% of final value within 500µS after a 25% step load change Set Up Time @Full Load A mA See Table ±1 ±5 ±3 ±2 See Table See Table See Table ≥4 1000 Hold Up Time @Full Load 10 Rise Time Temperature Coefficient PROTECTION Short Circuit Protection @Full Load All outputs 50 % % % mS mS mS %/ºC ±0.04 Hiccup mode Hiccup Mode Rated Output Voltage Protected by Zener Diode Over Voltage Protection Rated Output Voltage ENVIRONMENTAL SPECIFICATIONS Operating Case Temperature Storage Temperature Relative Humidity Non-Condensing Derating Derated from 100% at +40ºC linearly to 70% at 50ºC MTBF @Full Load at 25ºC ambient GENERAL SPECIFICATIONS Efficiency Insulation Resistance From Input to Output Withstand Voltage From Input to Output PHYSICAL SPECIFICATIONS Weight Over Current Protection Dimensions (L x W x H) Automatic Recovery Automatic Recovery 110 % 110 140 % 0 -40 5 40 85 95 ºC ºC % 100,000 See Table 50 MΩ VDC 4242 5.29~6oz (150~170g) 3.94in x 2.3in x 1.29in (100mm x 58.5mm x 32.8mm) SAFETY Safety Approvals EMC UL60950-1 CSA C22.2 EN60950-1 IEC60950-1 J60950-1 CE: Emission: EN55022; EN61000-3-2,3/Immunity: IEC61000-4-2,3,4,5,6,11 FCC 47 CFR Part 15 Subpart B NOTES (1) (2) (3) “x” in the model number represents AC Inlet options. “x” can either be “A” for IEC-320-C14, “B” for IEC-320-C8, or “C” for IEC-320-C6. Avg. Efficiency: Averages the efficiency at 25, 50, 75, and 100% of max. rated output current. Optional output connectors available. Standard Output Cable: 5~13V: UL1571, 16AWG, 1M 13~21V: UL2468, 18AWG, 6FT 21~58V: UL2468, 20AWG, 6FT Please call factory for order details. 12/30/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev A DTGPSU25 SERIES Up to 25 Watts AC DC Desktop Power Supplies Single Output DERATING CURVES Temperature Derating Typical Static Characteristics MECHANICAL DRAWINGS IEC-320-C14 IEC-320-C8 IEC-320-C6 12/30/2015 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev A DTGPSU25 SERIES Up to 25 Watts AC DC Desktop Power Supplies Single Output COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 12/30/2015 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4