DATA SHEET SKY13412-487LF: 0.4 to 2.7 GHz SP12T Switch with GPIO Interface Applications 2G/3G/4G multimode cellular handsets (LTE, UMTS, CDMA2000, EDGE, GSM) Embedded data cards TRX1 TRX2 TRX3 Features TRX4 Broadband frequency range: 0.4 to 2.7 GHz Low insertion loss High isolation and linearity Integrated GSM harmonic filter Integrated GPIO interface Ten TRX ports, one GSM low band transmit port, and one GSM high band transmit port Small QFN (30-pin, 3.0 x 3.8 x 0.75 mm) package (MSL1, 260 C per JEDEC J-STD-020) TRX5 TRX6 ANT TRX7 TRX8 (RX1) TRX9 (RX2) TRX10 (RX3) TX1 TX2 V1 V2 V3 V4 Decoder VDD Skyworks Green™ products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of Green™, document number SQ04-0074. S2703 Figure 1. SKY13412-487LF Block Diagram Description The SKY13412-487LF is a single pole, twelve throw (SP12T) antenna switch with integrated GSM transmit harmonic filter. The SKY13412-487LF maintains a high linearity, high isolation, and low insertion loss performance, which makes it an ideal choice for UMTS, CDMA2000, EDGE, GSM, and LTE applications. The design features two dedicated GSM transmit ports. The remaining ten ports are suitable for WCDMA transmit/receive and GSM receive functions. Three transmit ports have been specifically designed to provide optimal LTE Band 13 performance. The switch exhibits an excellent triple beat ratio and 2nd/3rd order modulation distortion performance. Switching is controlled by an integrated GPIO interface. Depending on the logic applied to the decoder, the antenna pin is connected to one of 12 switched RF ports using a low insertion loss path, while the paths between the antenna pin and the other RF pins are in a high isolation state. No external DC blocking capacitors are required on the RF paths. The SKY13412-487LF is manufactured in a compact, 3.0 x 3.8 x 0.75 mm, 30-pin surface mount Quad Flat No-Lead (QFN) package. A functional block diagram is shown in Figure 1. The pin configuration and package are shown in Figure 2. Signal pin assignments and functional pin descriptions are provided in Table 1. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 1 GND V1 V2 V3 V4 VDD DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE 30 29 28 27 26 25 23 TRX2 TRX3 3 22 TRX1 TRX4 4 21 TRX7 TRX5 5 20 TRX8 (RX1) TRX6 6 19 TRX9 (RX2) GND 7 18 GND ANT 8 17 TRX10 (RX3) GND 9 16 GND 10 11 12 13 14 15 GND 2 TX1 GND GND GND GND 24 TX2 1 GND GND S2810 Figure 2. SKY13412-487LF Pinout – 30-Pin QFN (Top View) Table 1. SKY13412-487LF Signal Descriptions (Note 1) Pin Name Description Pin Name Description 1 GND Ground 16 GND Ground 2 GND Ground 17 TRX10 (RX3) RF input/output port 10 (receive 3) 3 TRX3 RF input/output port 3. Optimized for LTE Band 13 (704 to 787 MHz) 18 GND Ground 4 TRX4 RF input/output port 4 19 TRX9 (RX2) RF input/output port 9 (receive 2) 5 TRX5 RF input/output port 5 20 TRX8 (RX1) RF input/output port 8 (receive 1) 6 TRX6 RF input/output port 6 21 TRX7 RF input/output port 7 optimized for LTE Band 13 (704 to 787 MHz) 7 GND Ground 22 TRX1 RF input/output port 1 optimized for LTE Band 13 (704 to 787 MHz) 8 ANT Antenna RF port 23 TRX2 RF input/output port 2 9 GND Ground 24 GND Ground 10 GND Ground 25 VDD DC power supply 11 TX2 GSM high band transmit RF input port with integrated harmonic filter 26 V4 DC input control voltage 4 12 GND Ground 27 V3 DC input control voltage 3 13 GND Ground 28 V2 DC input control voltage 2 14 TX1 GSM low band transmit RF input port with integrated harmonic filter 29 V1 DC input control voltage 1 15 GND Ground 30 GND Ground Note 1: Bottom ground paddles must be connected to ground. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 2 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Electrical and Mechanical Specifications +20 dBm Continuous Wave (CW) signal, fFUND, is sequentially applied to the TRX1 through TRX8 ports, while a –15 dBm CW blocker signal, fBLK, is applied to the ANT port. The absolute maximum ratings of the SKY13412-487LF are provided in Table 2. Electrical specifications are provided in Tables 3 through 8. Table 9 provides the control logic for the SKY13412-487LF. The resulting 3rd Order Intermodulation Distortion (IMD3), fRX, is measured over all phases of fFUND. The SKY13412-487LF exhibits exceptional performance for all TRXx ports. Figure 3 illustrates the test setup used to measure intermodulation products. This industry standardized test is used to simulate the WCDMA Band 1 linearity of the antenna switch. A Table 2. SKY13412-487LF Absolute Maximum Ratings (Note 1) Parameter Minimum Maximum Units VDD 2.5 5.0 V Digital control signals (V1, V2, V3, V4) VCTRL –0.5 +3.5 V RF input power: TX1 pin TX2 pin All TRXx pins (Note 2) PIN +36 +34 +33 dBm dBm dBm Storage temperature TSTG –55 +150 C Operating temperature TOP –35 +90 C Power supply Symbol Note 1: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. Note 2: All TRXx ports absolute maximum power are evaluated with GSM modulated signal at 50 Ω matching condition. CAUTION: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times. Table 3. SKY13412-487LF Electrical Specifications (Note 1) (1 of 3) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units RF Specifications Insertion loss IL Transmit low band, 915 MHz 1.10 1.45 dB Transmit high band, 1910 MHz 1.10 1.40 dB TRX1/3/7 Band 13, 704 to 787 MHz 0.40 0.60 dB TRXx ports, 960 MHz, +26 dBm 0.50 0.70 dB TRXx ports, 1990 MHz, +26 dBm 0.60 0.80 dB TRXx ports, 2170 MHz, +26 dBm 0.70 0.90 dB TRXx ports, 2690 MHz 0.95 1.15 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 3 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 3. SKY13412-487LF Electrical Specifications (Note 1) (2 of 3) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Transmit low band to ANT, 2fo 1648 to 1830 MHz 28 25 dB Transmit low band to ANT, 3fo 2472 to 2745 MHz 28 25 dB Transmit low band to ANT, 2fo 3296 to 3660 MHz 25 18 dB Transmit high band to ANT, 2fo 3420 to 3820 MHz 28 25 dB Transmit high band to ANT, 3fo 5130 to 5730 MHz 28 25 dB Transmit GSM low band, PIN <+34.5 dBm, VSWR = 1:1 –60 –45 dBm Transmit GSM low band, PIN <+34.5 dBm, VSWR = 5:1, all phases –50 –36 dBm Transmit GSM high band, PIN <+32 dBm, VSWR = 1:1 –60 –45 dBm Transmit GSM high band, PIN <+32 dBm, VSWR = 5:1, all phases –50 –36 dBm ANT to TRX1/3/7 ports @786.5 MHz, PIN <+25 dBm, VSWR = 1:1 –81 –78 dBm Transmit WCDMA low band, PIN <+26 dBm, VSWR = 1:1 –65 –60 dBm –45 dBm –60 dBm –45 dBm RF Specifications (continued) GSM harmonic attenuation H2LB H3LB H4LB H2HB H3HB Large signal harmonics TXLB_HARM TXLB_HARM_VSWR TXHB_HARM TXHB_HARM_VSWR B13_HARM TRXLB_HARM TRXLB_HARM_VSWR TRXHB_HARM TRXHB_HARM_VSWR nd 2 Harmonics TRXHB_HARM 3rd Harmonics TRXHB_HARM Isolation (see Tables 7 and 8 for additional specifications) Transmit WCDMA low band, PIN <+26 dBm, VSWR = 5:1 Transmit WCDMA high band, PIN <+26 dBm,VSWR = 1:1, all phases –65 Transmit WCDMA high band, PIN <+26 dBm, VSWR = 5:1, all phases TRx ports, PIN= +33 dBm, VSWR = 1:1,@ 1710 to 1910 MHz –67 –62 dBm TRx ports, PIN= +33 dBm, VSWR = 5:1, @ 1710 to 1910 MHz –60 –55 dBm TRx ports, PIN= +33 dBm, VSWR = 1:1, @ 1710 to 1910 MHz –50 –45 dBm TRx ports, PIN= +33 dBm, VSWR = 5:1, @ 1710 to 1910 MHz –39 –36 dBm Iso_TX1/2_1800 TX1 to TX2, PIN <+34.5 dBm, @ 1648 to 1830 MHz 30 dB Iso_TX1/TRX_900 TX1 to TRXx pins, PIN <+34.5 dBm, @ 824 to 915 MHz 35 dB Iso_TX1/RX_900 TX1 to receive ports (Note 2), PIN <+10 dBm, @ 869 to 960 MHz 35 dB Iso_TX2/TRX_1800 TX2 to TRXx pins, PIN <+32 dBm, @ 1710 to 1910 MHz 32 dB Iso_TX2/RX_1800 TX2 to receive ports (Note 2), PIN <+32 dBm, @ 1805 to 1930 MHz 32 dB Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 4 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 3. SKY13412-487LF Electrical Specifications (Note 1) (3 of 3) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Iso_RX2/RX3_1990 TRX9 (RX2) to ANT when TRX10 (RX3) active, PIN <+26 dBm, @ 1805 to 1990 MHz 33 dB Iso_RX3/RX2_1990 TRX10 (RX3) to ANT when TRX9 (RX2) active, PIN <+26 dBm, @ 1805 to 1990 MHz 33 dB TRXx to receive ports (Note 2), PIN <+26 dBm, @ 1710 to 2170 MHz 30 dB Iso_TRX/TRX_2170 TRXx to TRXx, PIN <+26 dBm, @ 1710 to 2170 MHz, TRX1 to TRX8, TRX2 to TRX9, TRX3 to TRX10, TRX3 to TRX5, TRX4 to TRX6 (non-adjacent pins) 25 dB Iso_TRX/TRX_2170 TRXx to TRXx, PIN <+26 dBm, @ 1710 to 2170 MHz, TRX1 to TRX2, TRX3 to TRX4, TRX4 to TRX5, TRX5 to TRX6, TRX1 to TRX7 (adjacent pins) 20 dB RF Specifications (continued) Isolation (see Tables 7 and 8 for additional specifications) Iso_TRX/RX_1990 2nd Order Intermodulation Distortion IMD2 CW carrier on TRXx ports with POUT = +20 dBm, CW interferer on ANT port with PIN = –15dBm, all blocker frequencies –110 –105 dBm 3rd Order Intermodulation Distortion IMD3 CW carrier on TRXx ports with POUT = +20 dBm, CW interferer on ANT port with PIN = –15dBm, all blocker frequencies –110 –105 dBm Triple beat ratio TBR See Table 6 –81 dBc 2.85 3.30 V 50 100 μA 50 100 μA 1.80 3.10 0.45 5 V V μA 2 5 μs 2 μs 20 mVp-p DC Specifications Supply voltage VDD Supply current: GSM850/EGSM900/DCS1800/ PCS1900 transmit WCDMA/CDMA2000 transmit/receive IDD Digital control signals: High Low Current V1, V2, V3, V4 2.50 1.35 0 DC supply turn-on/turn-off time RF path switching time Between the ANT port and any TX1/2 or TRXx ports Supply ripple Note 1: Performance is guaranteed only under the conditions listed in this table. Note 2: Dedicated receive ports are TRX8 (RX1), TRX9 (RX2), or TRX10 (RX3). Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 5 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 4. SKY13412-487LF Electrical Specifications: IP3 Frequencies and Power Levels (Note 1) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Band Transmit Frequency (MHz) Transmit Power (dBm) Frequency Blocker (MHz) Power Blocker (dBm) Receive Frequency (MHz) 1I 1950.0 +20 1760.0 –15 2140.0 2 1880.0 +20 1800.0 –15 1960.0 4 1732.0 +20 1332.0 –15 2132.0 5 836.5 +20 791.5 –15 881.5 8 897.0 +20 852.0 –15 942.0 Power Blocker (dBm) Receive Frequency (MHz) Note 1: Performance is guaranteed only under the conditions listed in this table. Table 5. SKY13412-487LF Electrical Specifications: IP2 Frequencies and Power Levels (Note 1) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Band Transmit Frequency (MHz) Transmit Power (dBm) Frequency Blocker 1 (MHz) Frequency Blocker 2 (MHz) 1I 1950.0 +20 190 4090 –15 2140.0 2 1880.0 +20 80 3840 –15 1960.0 4 1732.0 +20 400 3864 –15 2132.0 5 836.5 +20 45 1718 –15 881.5 8 897.0 +20 45 1839 –15 942.0 Note 1: Performance is guaranteed only under the conditions listed in this table. Table 6. SKY13412-487LF Electrical Specifications: Triple Beat Ratio Frequencies and Power Levels (Note 1) (VDD = 2.85 V, TOP = +25 C, Characteristic Impedance [ZO] = 50 Ω, Unless Otherwise Noted) Band Transmit Frequency 1 (MHz) Transmit Power 1 (dBm) Transmit Frequency 2 (MHz) Transmit Power 2 (dBm) Frequency Blocker @ ANT (MHz) Power Blocker (dBm) Triple Beat Product Frequency (MHz) 2 1880.0 +21.5 1881.0 +21.5 1960.0 –30 1960 ± 1 5 836.5 +21.5 881.5 +21.5 881.5 –30 881.5 ± 1 Note 1: Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 6 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 7. TX/TRx to TX/TRX Isolation Matrix (1 of 2) Isolation (dB) Port Closed on ANT Freq. (GHz) TX1 <0.90 TX1 (Pin 14) TX2 (Pin 11) TRX1 (Pin 22) TRX2 (Pin 23) TRX3 (Pin 3) TRX4 (Pin 4) TRX5 (Pin 5) TRX6 (Pin 6) TRX7 (Pin 21) TRX8 (Pin 20) TRX9 (Pin 19) TRX10 (Pin 17) N/A 27 53 49 60 60 53 55 52 52 50 44 TX1 <1.90 N/A 25 53 48 59 59 52 54 52 52 49 43 TX1 <2.20 N/A 36 60 60 62 60 57 54 57 53 48 42 TX1 <2.70 N/A 36 60 60 62 60 57 54 57 53 48 42 TX2 <0.90 30 N/A 53 49 58 61 54 52 53 53 53 50 TX2 <1.90 30 N/A 47 43 48 49 44 42 47 47 47 45 TX2 <2.20 37 N/A 47 42 47 48 43 42 46 47 47 45 TX2 <2.70 36 N/A 47 41 47 48 43 42 46 47 47 45 TRX1 <0.90 51 38 N/A 30 57 62 53 56 32 41 45 52 TRX1 <1.90 51 32 N/A 24 47 49 45 44 26 35 40 46 TRX1 <2.20 63 32 N/A 23 45 47 44 42 25 34 39 44 TRX1 <2.70 61 32 N/A 21 42 44 42 39 23 33 37 41 TRX2 <0.90 51 38 34 N/A 56 62 54 56 38 46 49 54 TRX2 <1.90 50 32 28 N/A 47 49 45 44 32 40 43 48 TRX2 <2.20 64 32 27 N/A 44 47 44 42 31 39 42 45 TRX2 <2.70 61 32 25 N/A 42 44 42 39 29 37 40 42 TRX3 <0.90 50 38 53 48 N/A 31 40 42 53 54 55 55 TRX3 <1.90 49 32 47 42 N/A 25 33 34 47 48 48 49 TRX3 <2.20 66 32 45 40 N/A 24 32 33 45 46 47 47 TRX3 <2.70 63 32 44 38 N/A 22 29 30 43 44 44 43 TRX4 <0.90 49 39 53 48 34 N/A 31 38 53 54 55 55 TRX4 <1.90 49 32 47 42 27 N/A 25 31 47 48 48 49 TRX4 <2.20 66 32 45 40 26 N/A 24 29 45 46 46 46 TRX4 <2.70 64 32 44 38 24 N/A 22 27 43 44 44 43 TRX5 <0.90 49 39 53 48 39 34 N/A 30 53 54 55 54 TRX5 <1.90 49 33 47 42 32 28 N/A 24 46 47 48 49 TRX5 <2.20 64 32 45 40 31 26 N/A 23 45 46 46 46 TRX5 <2.70 64 32 43 38 29 24 N/A 21 43 44 44 43 TRX6 <0.90 48 40 53 48 42 40 34 N/A 53 54 54 54 TRX6 <1.90 48 34 46 42 34 33 27 N/A 46 47 47 48 TRX6 <2.20 62 33 45 40 33 32 26 N/A 45 45 46 45 TRX6 <2.70 62 33 43 37 31 30 23 N/A 42 43 43 42 TRX7 <0.90 52 38 29 35 57 62 53 56 N/A 33 41 50 TRX7 <1.90 52 32 24 29 48 50 45 44 N/A 28 36 44 TRX7 <2.20 62 32 23 27 45 47 44 42 N/A 27 35 42 TRX7 <2.70 61 32 21 25 43 45 42 39 N/A 25 33 40 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 7 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 7. TX/TRx to TX/TRX Isolation Matrix (2 of 2) Port Closed on ANT Freq. (GHz) TRX8 Isolation (dB) TX1 (Pin 14) TX2 (Pin 11) TRX1 (Pin 22) TRX2 (Pin 23) TRX3 (Pin 3) TRX4 (Pin 4) TRX5 (Pin 5) TRX6 (Pin 6) TRX7 (Pin 21) TRX8 (Pin 20) TRX9 (Pin 19) TRX10 (Pin 17) <0.90 54 38 39 43 58 62 53 56 30 N/A 33 43 TRX8 <1.90 54 32 33 37 48 50 45 44 25 N/A 27 37 TRX8 <2.20 58 31 32 36 46 47 44 42 24 N/A 26 35 TRX8 <2.70 59 31 31 33 43 45 42 39 22 N/A 24 33 TRX9 <0.90 65 38 43 45 59 62 53 56 38 30 N/A 40 TRX9 <1.90 53 32 38 39 48 50 45 44 33 24 N/A 34 TRX9 <2.20 52 31 37 37 46 48 44 42 32 23 N/A 32 TRX9 <2.70 52 31 35 35 43 45 42 39 30 21 N/A 31 TRX10 <0.90 38 37 48 47 59 62 53 56 45 39 33 N/A TRX10 <1.90 37 31 42 40 49 50 45 44 39 33 28 N/A TRX10 <2.20 41 31 41 39 46 48 44 42 38 32 27 N/A TRX10 <2.70 41 31 39 36 43 45 42 39 37 30 25 N/A TRX10 (Pin 17) Table 8. ANT to TX/TRX Isolation Matrix (1 of 2) Port Closed on ANT Freq. (GHz) TX1 TX1 Isolation (dB) TX1 (Pin 14) TX2 (Pin 11) TRX1 (Pin 22) TRX2 (Pin 23) TRX3 (Pin 3) TRX4 (Pin 4) TRX5 (Pin 5) TRX6 (Pin 6) TRX7 (Pin 21) TRX8 (Pin 20) TRX9 (Pin 19) <0.90 N/A 29 53 48 49 47 42 42 53 53 54 52 <1.90 N/A 27 47 42 43 40 35 38 47 47 48 41 TX1 <2.20 N/A 35 57 51 43 40 35 39 57 57 52 39 TX1 <2.70 N/A 34 55 50 44 40 35 40 55 55 48 37 TX2 <0.90 35 N/A 53 48 49 47 43 42 54 54 51 51 TX2 <1.90 33 N/A 46 41 43 40 37 35 46 46 45 45 TX2 <2.20 37 N/A 42 39 40 38 35 34 42 42 42 42 TX2 <2.70 40 N/A 42 37 38 37 33 33 42 42 41 41 TRX1 <0.90 43 52 N/A 34 50 48 44 42 45 48 54 51 TRX1 <1.90 43 42 N/A 28 43 43 38 37 35 41 46 45 TRX1 <2.20 52 41 N/A 26 42 41 37 36 33 40 42 42 TRX1 <2.70 52 42 N/A 24 40 39 36 35 31 38 42 41 TRX2 <0.90 43 52 52 N/A 50 48 44 42 53 62 54 51 TRX2 <1.90 43 42 39 N/A 43 43 38 37 41 48 46 45 TRX2 <2.20 51 41 36 N/A 42 41 37 36 38 46 42 42 TRX2 <2.70 51 42 33 N/A 41 39 35 35 35 42 42 41 TRX3 <0.90 45 52 52 48 N/A 39 48 43 51 51 51 51 TRX3 <1.90 45 42 46 42 N/A 31 37 35 45 45 45 45 TRX3 <2.20 52 41 44 39 N/A 29 35 33 42 42 42 42 TRX3 <2.70 52 42 42 37 N/A 28 32 31 41 41 41 41 Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 8 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 8. ANT to TX/TRX Isolation Matrix (2 of 2) Port Closed on ANT Freq. (GHz) TRX4 Isolation (dB) TX1 (Pin 14) TX2 (Pin 11) TRX1 (Pin 22) TRX2 (Pin 23) TRX3 (Pin 3) TRX4 (Pin 4) TRX5 (Pin 5) TRX6 (Pin 6) TRX7 (Pin 21) TRX8 (Pin 20) TRX9 (Pin 19) TRX10 (Pin 17) <0.90 45 52 52 48 49 N/A 40 46 51 51 51 51 TRX4 <1.90 45 42 46 42 36 N/A 31 35 45 45 45 45 TRX4 <2.20 52 41 44 40 34 N/A 29 33 42 42 42 42 TRX4 <2.70 52 42 42 37 31 N/A 27 30 41 41 41 41 TRX5 <0.90 45 52 52 48 49 48 N/A 39 51 51 51 51 TRX5 <1.90 45 42 46 42 39 36 N/A 29 45 45 45 45 TRX5 <2.20 53 41 44 40 36 34 N/A 27 42 42 42 42 TRX5 <2.70 53 42 42 37 33 31 N/A 26 41 41 41 41 TRX6 <0.90 45 62 52 48 46 51 48 N/A 52 51 51 51 TRX6 <1.90 45 50 46 42 37 40 35 N/A 45 45 45 45 TRX6 <2.20 54 46 44 39 35 37 33 N/A 43 42 42 42 TRX6 <2.70 54 40 42 37 33 34 30 N/A 43 41 41 41 TRX7 <0.90 42 52 37 42 50 48 43 42 N/A 39 49 51 TRX7 <1.90 42 42 30 34 42 43 38 37 N/A 32 41 45 TRX7 <2.20 52 41 28 32 43 40 37 36 N/A 31 39 42 TRX7 <2.70 52 42 27 29 40 39 35 35 N/A 30 38 41 TRX8 <0.90 42 52 44 48 49 47 43 43 35 N/A 45 47 TRX8 <1.90 42 42 37 41 43 42 38 37 28 N/A 36 39 TRX8 <2.20 53 41 36 39 43 40 37 36 27 N/A 34 37 TRX8 <2.70 53 42 36 37 40 39 35 34 26 N/A 31 34 TRX9 <0.90 41 52 54 52 49 47 43 43 44 36 N/A 47 TRX9 <1.90 41 42 46 43 43 42 38 37 38 29 N/A 38 TRX9 <2.20 58 41 44 41 43 40 37 36 37 28 N/A 35 TRX9 <2.70 58 42 43 38 40 39 35 35 36 27 N/A 32 TRX10 <0.90 32 48 60 49 49 47 43 43 64 58 43 N/A TRX10 <1.90 32 40 50 42 43 42 38 37 50 43 35 N/A TRX10 <2.20 46 40 47 40 42 40 37 36 47 40 33 N/A TRX10 <2.70 45 41 45 38 39 38 35 34 45 38 32 N/A Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 9 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Table 9. SKY13412-487LF Mode Control Logic Insertion Loss State V1 (Pin 29) V2 (Pin 28) V3 (Pin 27) V4 (Pin 26) Isolation (all ports in isolation state) 0 0 0 0 TX1 1 1 0 0 TX2 1 0 0 0 TRX10 (RX3) 0 1 0 0 TRX9 (RX2) 0 1 1 0 TRX8 (RX1) 0 0 1 0 TRX7 0 0 0 1 TRX1 1 0 1 0 TRX2 1 1 1 0 TRX3 1 0 1 1 TRX4 1 1 1 1 TRX5 1 0 0 1 1 1 0 1 TRX6 Note: “1” = 1.8 V typical. “0” = 0 V to +0.2 V. Any state other than described in this table places the switch into an undefined state. An undefined state will not damage the device. fBLK 1760 MHz, –15 dBm fFUND 1950 MHz, +20 dBm fRX 2140 MHz, Measure Tone Circulator Signal Generator fFUND = 1950 MHz, +20 dBm Coupler to Monitor Input Power 1950 MHz Bandpass Filter Circulator Duplexer Phase Shifter SKY13412-487LF fFUND = +20 dBm fBLK = –15 dBm 1760 MHz Bandpass Filter Signal Generator fBLK = 1760 MHz, –15 dBm Spectrum Analyzer fRX = 2140 MHz S1970h Figure 3. 3rd Order Intermodulation Test Setup Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 10 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Evaluation Board Description Package and Handling Information The SKY13412-487LF Evaluation Board is used to test the performance of the SKY13412-487LF SP12T Switch. An Evaluation Board schematic diagram is provided in Figure 4. A recommended ESD protection circuit diagram is provided in Figure 5. An assembly drawing for the Evaluation Board is shown in Figure 6. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. Package Dimensions The SKY13412-487LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. The PCB layout footprint for the SKY13412-487LF is provided in Figure 7. Typical case markings are shown in Figure 8. Package dimensions for the 30-pin QFN are shown in Figure 9, and tape and reel dimensions are provided in Figure 10. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. 6-Pin Header 2 3 4 5 C5 33 pF C6 33 pF 6 7 Antenna 8 9 GND V4 V3 V2 V1 TRX2 TRX3 TRX1 TRX4 TRX7 TRX5 TRX8 (RX1) TRX6 TRX9 (RX2) GND GND ANT TRX10 (RX3) GND 10 11 12 13 GND RF I/O Port 6 5 25 TX1 RF I/O Port 5 26 GND 4 27 GND RF I/O Port 4 28 TX2 RF I/O Port 3 3 C2 33 pF GND GND 2 GND C1 10 nF C3 33 pF C4 33 pF 29 GND 30 1 6 VDD 1 14 GND 24 23 RF I/O Port 2 22 RF I/O Port 1 21 RF I/O Port 7 20 19 RF I/O Port 8 RF I/O Port 9 18 17 RF I/O Port 10 16 15 GSM High Band Transmit RF Port GSM Low Band Transmit RF Port S2811 Figure 4. SKY13412-487LF Evaluation Board Schematic Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 11 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE 4.7 pF To Application Antenna To SKY13412-487LF Antenna (Pin 8) 18 nH 18 nH ESD Circuit 1 12 pF To Application Antenna To SKY13412-487LF Antenna (Pin 8) 8.2 nH ESD Circuit 2 S2520c Figure 5. SKY13412-487LF Recommended ESD Protection Circuits C1 C2 C3 C6 C5 C4 S2706 Figure 6. SKY13412-487LF Evaluation Board Assembly Diagram Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 12 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE 2X 1 18X 1.29 Pin 30 30X 0.36 Pin 1 Pin 1 Indicator R0.2 30X 0.2 0.4 Pitch 2X 0.55 12X 1.69 Stencil aperture size for center ground pad should be 80 to 100% (by area) of the solder mask opening Package Outline 0.2 Stencil Aperture Top View Pin 30 0.2 2X 1 18X 1.24 11X 1.29 Pin 30 18X 0.36 30X 0.46 Pin 1 Pin 1 18X 0.2 Pin 1 Indicator R0.2 30X 0.3 0.4 Pitch Package Outline 0.4 Pitch 2X 0.55 7X 1.69 12X 1.64 0.25 Typ. Thermal via array Ø0.3 mm on 0.6 mm pitch will improve thermal performance Metallization Top View Package Outline 0.2 Solder Mask Opening Top View All dimensions are in millimeters S2914 Figure 7. SKY13412-487LF PCB Layout Footprint (Top View) Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 13 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Skyworks Part # Lot # Pin 1 Indicator Date Code: (YY = Calendar Year WW = Week CC = Country Code) Figure 8. Typical Part Markings (Top View) 2 +0.10/–0.15 Seating Plane 3.00 A C B Pin 1 Indicator 4X 0.2 Typ. 30X 0.20 Min. Pin 30 0.02 + 0.03/–0.02 Pin 1 R0.2 Pin 1 Indicator A 1.1 +0.10/–0.15 3.80 0.05 C 2X 0.75 ± 0.05 2X 0.05 C 0.10 C Top View 30X 3 0.40 Pitch 0.08 C Side View Bottom View 0.21 ± 0.05 2X R0.05 ± 0.05 0.2 ± 0.05 0.07 M C A B All measurements are in millimeters. Dimensioning and tolerancing according to ASME Y14.5M-1994. Coplanarity applies to the terminals and all other bottom surface metalization. Dimension applies to metalized terminal and is measured between 0.15 mm and 0.30 mm from terminal tip. Detail A 5 Scale: 80X 30 Places Figure 9. SKY13412-487LF 30-Pin QFN Package Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 14 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F S2809 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE 0.30 ± 0.05 2.00 ± 0.05 4.00 ± 0.10 ∅1.50 +0.10/–0 1.75 ± 0.10 B 1.10 ± 0.10 A B 8.00 ± 0.10 12.00 ± 0.30 A 5.50 ± 0.05 4.10 ± 0.10 (Bo) Pin #1 Indicator ∅1.50 Min. B Direction of Feed 3.30 ± 0.10 (Ao) Notes: 1. Carrier tape: black conductive polystyrene. 2. Cover tape material: transparent conductive PSA. A 3. ESD-surface resistivity is ≤1 x 1010 Ohms/square per EIA, JEDEC TNR Specification. 4. Ten sprocket hole pitch cumulative tolerance: ±0.20 mm. 5. Ao and Bo measured on plane 0.30 mm above the bottom of the pocket. 6. All measurements are in millimeters. S2141 Figure 10. SKY13412-487LF Tape and Reel Dimensions Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 201762F • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • September 18, 2014 15 DATA SHEET • SKY13412-487LF: SP12T SWITCH WITH GPIO INTERFACE Ordering Information Model Name SKY13412-487LF: 0.4 to 2.7 GHz SP12T Switch Manufacturing Part Number SKY13412-487LF Evaluation Board Part Number SKY13412-487LF-EVB Copyright © 2012-2014 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [email protected] • www.skyworksinc.com 16 September 18, 2014 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201762F