Tape Information Vishay Siliconix MINIQFN-6L CARRIER TAPE A 2.00 ± 0.05 B B Bo 8.00 ± 0.30 + 0.07 - 0.05 3.50 ± 0.05 0.28 + 0.10 - 0.00 1.75 ± 0.10 4.00 ± 0.10 4.00 ± 0.10 ∅ 1.50 ∅ 0.60 ± 0.05 5° MAX. A SECTION A-A Ko 5° MAX. Ao = 1.30 ± 0.10 Bo = 1.50 ± 0.10 Ko = 0.75 ± 0.10 Ao SECTION B-B SILICONIX PROPRIETARY DRAWING ANY DISCLOSURE AND DISTRIBUTION OF THIS DRAWING IS STRICTLY PROHIBITED Notes 1. 10 sprocket hole pitch cumulative tolerance ± 0.2. 2. Camber not to exceed 1 mm in 100 mm, also not to exceed 1.5 cm in 1 m actually. 3. Material: Black conductive poly carbonate. 4. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole. 5. All sizes in mm unless specified. 6. Use 7" lok reel with 8.4 mm width (see 93-5211-3). 7. Use seal tape with 5.4 mm width. (see 93-5210-3). 6. Vishay part number must be labeled at all reels of cover and carrier tape. 7. Surface resistivity - 105 max. /sq. ECN C10-0948-Rev. B, 11-Oct-10 DWG: 93-5255-X Document Number: 74494 11-Oct-10 www.vishay.com 1