Tape Information

Tape Information
www.vishay.com
Vishay Siliconix
TDFN8 2 x 2 CARRIER TAPE
2.00
4.00 ± 0.10
A
0.25 ± 0.02
Ø 1.55 ± 0.05
1.75 ± 0.10
Ø 0.60 ± 0.05
3.50 ± 0.05 +0.30
8.00 -0.10
Bo
5° max.
Ko
R 0.05 max.
4.00 ± 0.10
Ao
A
SECTION A-A
Ao = 2.25 ± 0.05
Bo = 2.25 ± 0.05
Ko = 0.80 ± 0.05
DWG: 93-5277-X
Notes
1. Measured from centerline of sprocket hole to centerline of pocket.
2. Cumulative tolerance of 10 sprocket hole is ± 0.20 mm.
3. Measured from centerline of sprocket hole to centerline of pocket.
4. Other material available. All dimensions in mm unless otherwise stated.
5. Camber not to exceed 1 mm in 100 mm, also not to exceed 1.5 cm in 1 m actually.
6. Vishay part number must be labeled at all reels of carrier tape.
7. Surface resistivity -105 max. Ω/sg.
C14-0097-Rev. D, 24-Mar-14
1
Document Number: 66706
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000