Microwave Amplifier 1500 MHz to 3000 MHz Model BX9872 FEATURES • Low Noise Figure: 2.3 dB • Laser Sealed Housing • High IP3: +31 dBm • Field Replaceable Connectors The Model BX9872 is standard high frequency amplifier covering 1500 MHz to 3000 MHz. This single stage design, utilizes a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SX9872. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain Gain Flatness Gain vs. Temperature** 1500 MHz to 3000 MHz 15.5 dB +/- 0.25 dB +/- 1.0 dB 1500 MHz to 3000 MHz 15 dB Min / 16 dB Max +/- 2.0 dB Max. Input VSWR Output VSWR 1.4:1 1.4:1 1.5:1 Max. 1.5:1 Max. Output 3rd Order Intercept Point +31 dBm +30 dBm Min. Noise Figure Supply Voltage Supply Current 2.3 dB +12 volts 100 mA 2.5 dB Max. +12 volts 150 mA Max. Revision: 7/18/2013 Housing Size RF Connectors Min. / Max. Values Typical values are measured at 25°C but not guaranteed. 0.820” L x 1.000” W x 0.300” H (Housing #088-00386) SMA Female Replaceable Connectors 25°C , (**-20°C to +85°C) Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW) -55°C to +85°C -28°C to +85°C +15 VDC +13 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com Microwave Amplifier 1500 MHz to 3000 MHz Model BX9872 Outline Drawing Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com