Microwave Amplifier 10 GHz to 20 GHz Model BXHF1072 FEATURES • High IP3: +30 dBm • Laser Sealed Housing • Broad Bandwidth • Field Replaceable Connectors The Model BXHF1072 is standard high frequency amplifier covering 10 GHz to 20 GHz. This two stage design, utilizes a laser sealed housing for the ultimate in environmental protection. This standard design may also be ordered in a screened MIL-STD-883 version as a model SXHF1072. All specification ratings are based on measurements in a 50 ohm system with a DC supply voltage tolerance of +/- 2%. Parameter Typical Min. / Max. Frequency Range Gain Gain Flatness Gain vs. Temperature** 10 GHz to 20 GHz 20 dB +/- 0.5 dB +/- 1.0 dB 10 GHz to 20 GHz 19 dB Min / 21 dB Max. +/- 2.0 dB Max. Input VSWR Output VSWR 1.9:1 1.9:1 Output 3rd Order Intercept Point +30 dBm Noise Figure Supply Voltage Supply Current 5.0 dB +12 volts 440 mA 2.0:1 Max. 2.0:1 Max. +28 dBm Min. 5.5 dB Max. +12 volts 450 mA Max. Revision: 10/30/2013 Housing Size RF Connectors Min. / Max. Values Typical values are measured at 25°C but not guaranteed. 1.500” L x 1.060” W x 0.300” H SMA Female Replaceable Connectors 25°C , (**-20°C to +85°C) Maximum (No Damage) Ratings Storage Temperature Operating Temperature (Case) DC Voltage @ 25°C Input Drive @ 25°C (CW) -55°C to +85°C -28°C to +85°C +15 VDC +13 dBm Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com Microwave Amplifier 10 GHz to 20 GHz Model BXHF1072 Outline Drawing Spectrum Microwave, Inc. • PH: 888.553.7531 • Fax: 888.553.7532 • Email: [email protected] • www.SpectrumMicrowave.com