RENESAS M3T

M3T-DUMMY100S
Dummy IC for 100-pin 0.65mm-pitch QFP (100P6S-A, 100P6S-E)
Dimensions
Function
This accessory tool connects the probe of an emulation pod and the
target, or an MCU and the target. Its dimensions are the same as those
of the MCU for the 100-pin 0.65mm-pitch QFP (100P6S, 100P6S-E)
package.
It consists of parts (1) to (3) shown in the diagram.
Attaching Procedure
This converter can be used during debugging and board-mounted
evaluation in common.
When debugging
(1) Mount a socket on the foot pattern on the target.
(2) On top of it, mount the M3T-DUMMY100S and a socket
frame in that order.
(3) Then connect the probe of the emulation pod to the connector
provided at the top of the M3T-DUMMY100S.
During board-mounted evaluation
Mount an MCU and a socket frame on a socket on the target in that
order.
① denotes pin numbers on the M3T-DUMMY100S.
1 denotes pin numbers of the top of a connector.
Symbol
Term
Dimensions [mm]
A
Fitting height
5.0
b
Pin width
0.25
D
Package length
14.0
E
Package width
20.0
e
Interval in row of pins
0.65
HD
Overall length
18.0
HE
Overall width
24.0
M
Mount pad size
6.3
Foot Pattern Reference Dimensions
See Appendix C "Reference Dimensional Drawings for Common
* The 100P6S-E is an IC package whose lead wire is longer than that
of 100P6S-A.
100-pin 0.65mm-pitch QFP Foot Pattern".
[Ordering Information] See Appendix H "Ordering Information".
*All brand names and product names are trademarks or registered trademarks of their respective companies.