Triple Balanced Mixer Model MM4xxG-1 Multi-Octave Band RF 2.0 to 8.0 GHz Electrical Specifications: (1) Specifications Conditions Parameter SSB Conversion loss:(2) (3) RF (GHz) 2.0-8.0 2.0-8.0 LO (GHz) 2.0-8.0 2.0-8.0 IF (GHz) 0.01-3.0 0.01-4.0 Isolation LO to RF: LO to IF: RF to IF: 2.0-8.0 Input 1 dB Compression Point: 2.0-8.0 2.0-8.0 0.01-4.0 Input Third Order Intercept Point: 2.0-8.0 2.0-8.0 0.01-4.0 2.0-8.0 2.0-8.0 0.01-4.0 LO Power: Min 16 dB 23 dB 2.0-8.0 2.0-8.0 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55˚C to +100˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss. 3. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. Outline: G Max 8.0 dB 9.5 dB 25 dB 25 dB 27 dB +5 dBm +8 dBm +12 dBm +15 dBm +14 dBm +17 dBm +21 dBm +24 dBm +10 dBm +13 dBm +17 dBm +21 dBm (4) MM4xxG-1 Typical 6.3 dB 7.3 dB Model MM4xxG-1 LO Power 4 = +10 dBm 6 = +13 dBm 7 = +17 dBm 8 = +21 dBm MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 MM44 MM46 MM47 MM48 Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Typical Performance at 25˚C All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 Rev. 2/26/09