Double Balanced Mixer Model MM9xxG-40 RF 0.5 to 18.0 GHz Ultra-Broadband Electrical Specifications: (1) Model MM9xxG-40 Specifications Conditions RF (GHz) 0.5-18.0 0.5-18.0 Parameter SSB Conversion loss: (2) (3) Isolation LO to RF: LO to IF: RF to IF: 0.5-18.0 LO (GHz) 0.5-18.0 0.5-18.0 IF (MHz) DC-150 DC-300 Min 12 dB 20 dB 5 dB 10 dB 20 dB 0.5-1.0 1.0-18.0 0.5-1.0 1.0-2.5 2.5-18.0 Input 1 dB Compression Point: 0.5-18.0 0.5-18.0 DC-300 Input Third Order Intercept Point: 0.5-18.0 0.5-18.0 DC-300 LO Power: (4) 0.5-18.0 0.5-18.0 DC-300 Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system from -55 C to +100 C with the nominal LO power. Specifications indicated as typical are not guaranteed. 2. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. 3. Conversion loss typically degrades less than 0.5 dB at +100 C and improves less than 0.5 dB at -55 C. 4. Usable LO drives are up to 2 dB below and 3 dB above nominal. MM9xxG-40 Typical 6.5 dB 7.0 dB 20 30 12 16 31 30 Max 8.5 dB 9.0 dB dB dB dB dB dB dB +2 dBm +5 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +23 dBm +7 dBm +10 dBm +14 dBm +19 dBm MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 MM93 MM94 MM96 MM97 LO Power 3 = +7 dBm 4 = +10 dBm 6 = +14 dBm 7 = +19 dBm Drop-In Module or With SMA(F) Connectors M = Module P = With Connectors Typical Performance at 25° C Outline: G- .015D All dimensions are in inches and [mm]. Spectrum Microwave · 2144 Franklin Drive N.E. · Palm Bay, FL 32905 · PH (888) 553-7531 · Fax (888) 553-7532 www.SpectrumMicrowave.com Spectrum Microwave · 2707 Black Lake Place · Philadelphia, PA 19154 · PH (215) 464-4000 · Fax (215) 464-4001 Rev. 2/14/08