Print as PDF

Red Lion's Sixnet series rugged RTUs and I/O modules a powerful means to reliably monitor and control
remote sites around the clock in the harshest environments. Our compact automation systems can start small
and grow as needs increase without requiring hardware replacement. Virtually unlimited scalability means
organizations have fewer restrictions on the number of remote sites or devices that are supported. "Best of
both worlds" programming combines Windows ease of use with the future-proof security of an embedded
Linux OS.
Please select a topic from the table of contents or click on the product you need assistance with from the
table below.
If you require an analysis of your application by Red Lion's Technical Support, please review: Gathering
Information for Analysis by Sixnet
For customers who have SixTRAK IO modules they wish to replace, please review the SixTRAK IO
Replacement Guide to select a current model.
Contents
1RAM 6000 Cellular RTUs
2 Industrial Controllers, RTUs and I/O Gateways
2.1EtherTRAK2 Ethernet I/O
2.2EtherTRAK2 and Etherbus Accessories
3 Legacy Products
3.1Industrial Controllers, RTUs and I/O Gateways
3.2EtherTRAK® Ethernet I/O
3.3EtherTRAK Accessories
3.4RemoteTRAK® RS485 I/O and Accessories
3.5SixTRAK® I/O and Accessories
4Technote
5Training
RAM 6000 Cellular RTUs
Model
Description
Carrier
Power
Connector
GPS
Sn6600DC.png
RAM-6400
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port,1
serial port
EDGE/GSM
4-Pin Molex
No
RAM-6401
SN6601.png
RAM-6421
Sn6621.png
RAM-6600
Sn6600DC.png
RAM-6601
SN6601.png
RAM-6621
Sn6621.png
RAM-6800
Sn6600DC.png
RAM-6801
SN6601.png
RAM-6821
Sn6621.png
RAM-6700
Sn6621.png
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port,1
serial port
EDGE/GSM
Terminal
Block
No
Cellular RTU, Modbus
gateway with full router
capability, 5 Ethernet ports, 1
serial port
EDGE/GSM
Terminal
Block
No
CDMA/EVDO Rev.A
4-Pin
Molex
No
CDMA/EVDO Rev.A
Terminal
Block
No
CDMA/EVDO Rev.A
Terminal
Block
No
HSPA/EDGE/GPRS
4-Pin
Molex
No
HSPA/EDGE/GPRS
Terminal
Block
No
Cellular RTU, Modbus
gateway with full router
capability, 5 Ethernet port, 1
serial port
HSPA/EDGE/GPRS
Terminal
Block
No
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
4G LTE/HSPA/EDGE/GPRS
4-Pin
Molex
No
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
Cellular RTU, Modbus
gateway with full router
capability, 5 Ethernet ports, 1
serial port
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
RAM-6701
Sn6621.png
RAM-6721
Sn6621.png
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
4G LTE/HSPA/EDGE/GPRS
Terminal
Block
No
Cellular RTU, Modbus
gateway with full router
capability, 5 Ethernet port, 1
serial port
4G LTE/HSPA/EDGE/GPRS
Terminal
Block
No
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
Multi-carrier 4G
LTE/HSPA/EDGE/GPRS
4-Pin
Molex
Yes
Cellular RTU, Modbus
gateway with full router
capability, 1 Ethernet port, 1
serial port
Multi-carrier 4G
LTE/HSPA/EDGE/GPRS
Terminal
Block
Yes
RAM-6900
RAM-6900 R.jpg
RAM-6901
RAM-6901 R.jpg
RAM-6921
Ram-6921 r.jpg
Cellular RTU, Modbus
gateway with full router
capability, 5 Ethernet port, 1
serial port
Multi-carrier 4G
LTE/HSPA/EDGE/GPRS
Terminal
Block
Yes
Industrial Controllers, RTUs and I/O Gateways
Product
STProgram Memory
Part Description Eth 232 485 DI DO AI AO
NVRAM Flash DRAM programming
BUS
Flash
Dram
Number
ST- Linux IPm
ISaGRAF
IPM- Open DCS 5 2 1 - - - - Yes
2M 118M
Linux &
128M
64M
6350 Controller
C/C++
VTISaGRAF
Linux IPm
IPM1 3 1 - - - - Yes 512K
6M
Linux &
16M
16M
Open RTU
1410
C/C++
Mini-IPm
VTISaGRAF
Plus with
MIPM1 2 2 12 4 8 2
512K 54M
Linux &
64M
32M
AGA &
245-D
C/C++
DNP3
Mini-IPm
VTISaGRAF
Plus with
MIPM1 2 1 12 8 6 512K 54M
Linux &
64M
32M
AGA &
135-D
C/C++
DNP3
VTISaGRAF
Micro-IPm
UIPM1 2 1 8 4 2 512K
6M
Linux &
16M
16M
RTU
431-H
C/C++
VTISaGRAF
VT-IPm2m
IPM2M1 1 1 12 4 8 512K 20M 20M
Linux &
32M
32M
RTU
113-D
C/C++
VTISaGRAF
VT-IPm2m
IPM2M1 1 1 12 4 8 2
512K 20M 20M
Linux &
32M
32M
RTU
213-D
C/C++
EtherTRAK2 Ethernet I/O
Product Part
Number
Description
DI
AI
DO
AO
Combination I/O with one isolated input counter (see
24
8
8
Note 1)
E2-MIX24882-D* Combination I/O with two analog outputs (see Note 1) 24
8
8
2
32 inputs (10-30 VDC) including 16 multifunction
E2-32DI24-D*
32
counters
E2-16DI24-D*
16 individually isolated 10-30 VDC with counters
16
E2-16DIAC-D
16 individually isolated 120 VAC (nominal) inputs
16
High density discrete outputs 0.5 Amp each, 8 Amps
E2-32DO24-D*
32
total (See note 2)
Individually isolated 1 Amp outputs, 16 Amps total
E2-16DO24-D*
16
(See note 2)
E2-32AI20M-D*
High density 16 bit 4-20 mA inputs (See note 2)
32
Voltage inputs 0-10V (other ranges available as special
E2-32AI10V-D*
32
order)
E2-16AI20M-D*
16 channels 4-20 mA inputs (See note 2)
16
E2-8AO20M-D*
4-20 mA analog outputs
8
E2-16AI-8AO-D*
16 4-20 mA analog inputs and 8 4-20 mA outputs
16
8
E2-16ISO20M-D*
16 Individually 4-20mA analog inputs (See note 3)
16
16 Individually isolated thermocouple inputs with J,K,
E2-16ISOTC-D*
16TC
E, R, T, C, N, S
8 Individually isolated thermocouple inputs with J,K,
E2-8ISOTC-D*
8TC
E, R, T, C, N, S
E2-10RTD-D*
RTD (100 Ohm platinum), -200 to 850°C
10RTD
16 individually isolated discrete outputs (10E2-16DORLY-D*
16
30VDC/VAC Relay) 1 Amp outputs, 16 Amps total.
Combination I/O with 4 isolated input counters and 4
E2-MIX20884-D
20
8
8
4
analog outputs.
*For these models, replace E2 with EB for an EtherTRAK-2 module that supports PoE power input
E2-MIX24880-D*
EtherTRAK2 and Etherbus Accessories
Product Part #
EB-5ES-PSE-1
EB-PSE-24V-1A
EB-PSE-48V-2A
EB-CAT5E-100B
Description
5 port PoE Switch with 5 RJ45 ports (4 PoE ports)
1-port PoE injector, 24 VDC to PoE on unused pairs
2-port PoE injector, 48 VDC to PoE on unused pairs
100 meter industrial Ethernet bulk cable reel
EB-CAT5E-300B
ET-PS-024-02
ST-PS-024-05
300 meter industrial Ethernet bulk cable reel
Universal AC/DC power supply (24 VDC, 2 Amps max.), DIN rail mount
AC/DC power supply (24 VDC, 5 Amp max.), DIN rail mount
Legacy Products
Industrial Controllers, RTUs and I/O Gateways
As a result of Red Lion?s acquisition of Sixnet, we are pleased to announce that the following Industrial
Automation models previously designated as End of Life (EOL) products are now back in production and
available to order: ET-GT-ST-3, EtherTRAK I/O modules, RemoteTRAK I/O modules, ST-GT-1210, STIPM-1350, ST-IPM-2350, VT-IPM-2410, VT-MIPM-131-D, VT-MIPM-241-D & VT-uIPm-441-H
View the Announcement for further details
Product
STProgram Memory
Part Description Eth 232 485 DI DO AI AO
NVRAM Flash DRAM programming
BUS
Flash
Dram
Number
ST- Linux IPm
ISaGRAF
IPM- Open DCS 5 2 1 - - - - Yes
2M
6M
Linux &
16M
16M
2350 Controller
C/C++
ST- Linux IPm
ISaGRAF
IPM- Open DCS 5 2 1 - - - - Yes 512K
6M
Linux &
16M
16M
1350 Controller
C/C++
VTISaGRAF
Linux IPm
IPM1 3 1 - - - - Yes
2M
6M
Linux &
16M
16M
Open RTU
2410
C/C++
VTISaGRAF
Mini-IPm
MIPM1 2 2 12 4 8 2
512K
6M
Linux &
16M
16M
RTU
241-D
C/C++
VTISaGRAF
Mini-IPm
MIPM1 2 1 12 8 6 512K
6M
Linux &
16M
16M
RTU
131-D
C/C++
VTISaGRAF
Micro-IPm
UIPM1 3 1 8 4 - 512K
6M
Linux &
16M
16M
RTU
441-H
C/C++
ISaGRAF
ST-GTController 1 1 1 - - - - Yes 512K
6M
Linux &
16M
16M
1210
C/C++
ET-GTI/O
2 1 - - - - - Yes
Sxtools
ST-3
Gateway
RM-RTU-8440-F
Low Cost RTU
- 8
4
4 - - - - - - -
Sxtools
- -
EtherTRAK® Ethernet I/O
As a result of Red Lion?s acquisition of Sixnet, we are pleased to announce that the following Industrial
Automation models previously designated as End of Life (EOL) products are now back in production and
available to order: ET-GT-ST-3, EtherTRAK I/O modules, RemoteTRAK I/O modules, ST-GT-1210, STIPM-1350, ST-IPM-2350, VT-IPM-2410, VT-MIPM-131-D, VT-MIPM-241-D & VT-uIPm-441-H
View the Announcement for further details
Part # (Module with
base)
ET-16DI2-H
ET-16D02-H
ET-16AI2-H
ET-8INS-U
ET-8CNT-U
ET-8DI2-8DO2-H
ET-8DI2-8AI2-H
ET-8AI2-4AO2-H
ET-4RTD-4DI2-U
ET-MIX24880-D
Description
DI
AI
DO
AO
10-30 VDC, high density configuration
10-30 VDC, 1 Amp per channel, high density
configuration
4-20 mA, high speed, 14-Bit
Instrumentation (thermocouples, mV, volts &
mA), 16-bit
High speed counters (quadrature, frequency &
more), 32-bit
10-30 VDC, 1 Amp per output channel
10-30 VDC and 4-20 mA, 14-bit
10-30 VDC and 4-20 mA, 14-bit
10-30 VDC and 4-20 mA, 14-bit
10-30 VDC and 4-20 mA, 14-bit (see Note 1)
16
-
-
-
-
-
16
-
-
16
-
-
-
8
-
-
8
-
-
-
8
8
4
24*
8
8
4
8
8
8*
4
-
EtherTRAK Accessories
Part #
ET-GT-ST-3
ET-PS-024-02
ST-CABLE-PF
ET-GT-232-1
ET-GT-485-1
Description
EtherTRAK I/O Concentrator - connect SixTRAK & RemoteTRAK modules
Universal AC/DC power supply (24 VDC, 2 Amps max.), DIN rail mount
RS232 configuration cable, PC to ET-GT-ST-1, DB9F to DB9F, null-modem, 8 ft.
EtherTrak Gateway, Ethernet to RS232 Converter
EtherTrak Gateway, Ethernet to RS485 Converter
RemoteTRAK® RS485 I/O and Accessories
As a result of Red Lion?s acquisition of Sixnet, we are pleased to announce that the following Industrial
Automation models previously designated as End of Life (EOL) products are now back in production and
available to order: ET-GT-ST-3, EtherTRAK I/O modules, RemoteTRAK I/O modules, ST-GT-1210, STIPM-1350, ST-IPM-2350, VT-IPM-2410, VT-MIPM-131-D, VT-MIPM-241-D & VT-uIPm-441-H
View the Announcement for further details
Part # (Module with
base)
RM-8DI2-F
RM-8DI2-U
RM-16DI2-H
RM-8DO2-F
RM-16DO2-H
RM-8AI2-F
RM-16AI2-H
RM-8INS-U
RM-4AO2-F
RM-8AO2-F
RM-4DI2-4AI2-U
RM-4DI2-4DO2-U
RM-RTU-8440-F
RM-232-485-4U
RM-232-SETUP
Description
DI
AI
DO
AO
10-30 VDC, field wiring base (-F) saves on wiring
8
and time
10-30 VDC, universal base (-U) provides extra
8
isolation
10-30 VDC, high density configuration
16
10-30 VDC, 3 Amps per channel
8
10-30 VDC, 1 Amp per channel, high density
16
configuration
4-20 mA, 16-bit
8
4-20 mA, high density configuration, 16-bit
16
Instrumentation (thermocouples, mV, volts & mA),
8
16-bit
4-20 mA, 13-bit
4
4-20 mA, 13-bit
8
10-30 VDC and 4-20 mA, 16-bit
4
4
10-30 VDC, 1 Amp per output channel
4
4
Lowest cost RTU / combination I/O module
8
4
4
Converter for RS232 to RS485 (2 wire), connect up to 128 modules
Field setup module (includes ST-CABLE-PF). Required for initial configuration.
SixTRAK® I/O and Accessories
After 13 years on the market, the SixTRAK family of I/O has reached end of life due to component
obsolescence. View the announcement for further details
Part # (Module with
base)
ST-DI-005-08F / -08U
ST-DI-024-08F / -08U
ST-DI-048-08F / -08U
ST-DI-120-08F / -08U
ST-DI-240-08F / -08U
ST-DI-024-16H
ST-MIX16880-D
ST-MIX12884-D
Description
DI
AI
DO
AO
4-10 VAC/VDC
10-32 VAC/VDC
32-60 VAC/VDC
60-140 VAC/VDC
140-265 VAC
10-32 VDC, high density configuration
Double density combination module with 32
mixed I/O points
Double density combination module with 4
analog outputs
8
8
8
8
8
16
-
-
-
16
8
8
-
12
8
8
4
ST-DI-024-32D
ST-DI-CNT-08U
ST-DO-DC1-08F / 08U
ST-DO-DC3-08F / 08U
ST-DO-AC1-08F / 08U
ST-DO-AC2-08F / 08U
ST-DO-DC2-16H
ST-DO-RLY-06U
ST-AI-INS-08U
10-32 VDC, double density configuration
4-30 VDC, high-speed counters, 50 kHz max. rate
32
8
-
-
-
0-60 VDC, 2A/channel
-
-
8
-
60-150 VDC, 1A/channel
-
-
8
-
16-140 VAC, 2A/channel
-
-
8
-
140-265 VAC, 2A/channel
-
-
8
-
10-32 VDC, 0.5 Amps per channel
Form C (SPDT), 0-140 VAC/VDC, 2A per channel
Instrumentation (thermocouples, mV, volts & 4-20
mA)
4-20 mA, field wiring ready
4-20 mA, high density configuration
+ / - 1, 2, 5, 10 volts
-
-
16
6
-
-
8
-
-
ST-AI-20M-08F
8
ST-AI-20M-16H
16
ST-AI-10V-08F
8
ST-DO-AC2-08F / 140-265 VAC, 2A/channel
8
08U
Note: An ST-BUS-KIT is included with each SixTRAK I/O module. Kit includes 5 wiring jumpers and
extra terminal labels
- ##F = Field wiring base saves on wiring and time
- ##U = Universal base provides extra isolation
Technote
See here for information on Toolkit and IsaGRAF compatibility with Windows 7
PID Loop Limitations
Training
Are you new to Sixnet Automation products, or need a refresher? Please review some of the training material
below to help you get started!
Basic Datalogging Training
Introduction to IO Transfers
Introduction to the Sixnet IO Toolkit
Getting Started with Sixnet RTUs
Configuring Redundancy in your Sixnet IO
Writing a Client Transfer
RTU Firmware Upgrade
DNP objects supported