Declaration of Conformity For Sixnet Industrial Products ATEX www.sixnet.com Sixnet Declaration of Conformity - ATEX TABLE OF CONTENTS ATEX Directive ..................................................................................................................................................................3 ATEX Tempurature Class ................................................................................................................................................3 ATEX Ratings Connectivity..............................................................................................................................................4 ATEX Ratings Automation ...............................................................................................................................................4 ATEX Ratings Power Device ...........................................................................................................................................5 ATEX Ratings Modems ....................................................................................................................................................5 Sixnet, LLC Corporate Headquarters 331 Ushers Road, Ballston Lake, NY 12019 FLEXIBLE. RELIABLE. POWERFUL. T +1 518 877 5173 F +1 518 877 8346 www.sixnet.com DEC 2010 © 2010. Sixnet. All Rights Reserved. 2 DECLARATION OF CONFORMITY for Sixnet Industrial Products 331 Ushers Road Ballston Lake, NY 12019 ATEX ATEX Directive 94/9/EC (as amended) relating to Group II, Category 3 locations EN/IEC 60079-0: Explosive Atmospheres - Part 0: Equipment - General requirements. EN/IEC 60079-15: Electrical Apparatus for Explosive Gas Atmospheres - Part 15: Construction, test and marking of type of protection "n" electrical apparatus. Zone 2: An area where an explosive atmosphere consisting of a mixture with air of dangerous substances in the form of gas, vapor or mist is not likely to occur in normal operation. But if it does occur it will persist for a short period only. Group II: Surface Industries (Not mining) Category 3 - Equipment in this category is intended for use in areas in which explosive atmospheres caused by gases, vapors or mists mixtures are unlikely to occur or, if they do occur, are likely to do so only infrequently and for a short period only. Sixnet products are manufactured under ISO 9001:2008 quality management system. II 3 G (Ex nA II TX) ATEX Temperature class rating T1 T2 T3 T4 T5 T6 Maximum surface temperature of enclosure and components. (°C) 450 300 200 135 100 85 Sixnet, LLC Corporate Headquarters 331 Ushers Road, Ballston Lake, NY 12019 FLEXIBLE. RELIABLE. POWERFUL. T +1 518 877 5173 F +1 518 877 8346 www.sixnet.com DEC 2010 © 2010. Sixnet. All Rights Reserved. 3 DECLARATION OF CONFORMITY for Sixnet Industrial Products 331 Ushers Road Ballston Lake, NY 12019 ATEX Connectivity Listing T Rating T4 T4 Temp. -40 to 85C -40 to 85C T4 -40 to 85C T4 -40 to 75C T4 T4 T4 T4 -40 to 85C -40 to 75C -40 to 75C -40 to 75C T4 T5 -40 to 85C -10 to 60C T4 -40 to 60C T5 -40 to 60C T5 T5 T4 T4 -40 to 75C -40 to 60C -40 to 60C -40 to 85C T Rating Temp. T4 T5 for ET-8A12-4A02H. All others T4. -40 to 75C -40 to 70C T4 -20 to 65C T4 T4 -20 to 65C -20 to 65C Model Numbers SLX-3EG-1SFP SLX-5 followed by EG or RG followed by -1 or -2SFP SLX–3 followed by ES followed by -1 or -2 may be followed by SC, ST, SCL or STL LX-3ES-2 or 3; SC, ST; L.SLXL. SLX - 5, 8 or 9 followed by MS followed by -1 to 9 may be followed by SC, ST, SCL or STL SLX - 5, 8 or 9 followed by ES followed by -1 to 9 may be followed by SC, ST, SCL or STL SLX-10MG-1 SLX-8MG-1 SLX-16MS-1 and SLX-18MG-1 SLX-6 followed by ES or RS followed by -1 thru -5 may be followed by SC, ST, SCL or STL may be followed by D1 SL-2ES; -2 or -3 followed by SC, ST, SCL or STL SL-6 followed by ES or RS followed by -1 thru -5 may be followed by SC, ST, SCL or STL may be followed by D1 SL - 5, 8 or 9 followed by ES followed by -1 to 3 may be followed by SC, ST, SCL or STL ET- 5 followed by ES or RS followed by -IP67 followed by -D, E, D1 or E1 EB-GT-8ES-1EP EL228-DD or DO-1 EL212F-DC-V1 Automation Listing Model Numbers E2 or EB -MIX24880; MIX24882; 32DI24; 16DI24; 32DO24; 16DO24; 32AI20M; 32AI10V; 16AI20M; 8AO20M; 16AI8AO; 16INS; 8INS; 10RTD; 16ISO20M; 8ISOTC; 16ISOTC; or 16DORLY followed by –D; -M or -B1. ET-MIX24880; 16DI2; 16DO2; 16AI2; 8INS; 8CNT; 8DI2-8DO2; 8DI2-8AI2; 8AI2-4AO2 and 4RTD-4DI2 followed by –D, H or U. ST-IPM-1350, ST-IPM-2350, ST-IPM-6350, VT-IPM-1410 and VT-IPM-2410. VT-MIPM-131-D, -135-D, -241-D and -245-D. VT-IPM2M-113-D and VT-IPM2M-213-D VT-UIPM-431-H and VT-UIPM-441-H Sixnet, LLC Corporate Headquarters 331 Ushers Road, Ballston Lake, NY 12019 FLEXIBLE. RELIABLE. POWERFUL. T +1 518 877 5173 F +1 518 877 8346 www.sixnet.com DEC 2010 © 2010. Sixnet. All Rights Reserved. 4 DECLARATION OF CONFORMITY for Sixnet Industrial Products 331 Ushers Road Ballston Lake, NY 12019 ATEX Power Device Listing T Rating Temp. T4 T4 T3 T4 -40 to 75C -40 to 75C -40 to 75C -40 to 75C T4 -40 to 75C T Rating T5 T5 Temp. -30 to 70C -40 to 75C Model Numbers EB-PS-4824-13 EB-PD followed by -24V-1 or UPS-1 EB-PSE-24V followed by -1A or -1B EB-PSE-48V followed by -2A or -2B EB-5ES-PSE followed by -1, -2, or -3 followed by SC, SCL, ST or STL Modem Listing Model Numbers VT-MODEM followed by -1, -2, -3, -4 or -5 followed by WW SLX-5MS-MDM-1 Special Conditions for safe use. These products are operator interface units to be used within control panels. The enclosure shall be suitable for the location. A minimum IP54 rated enclosure is needed for ATEX unless an equivalent degree of protection is supplied by the location. No hot swapping of any of the Automation products in hazardous locations. Reissued on August 27th 2013 Authorized by Denis Aull Vice President of Engineering Authorized Signatory Sixnet, LLC Corporate Headquarters 331 Ushers Road, Ballston Lake, NY 12019 FLEXIBLE. RELIABLE. POWERFUL. T +1 518 877 5173 F +1 518 877 8346 www.sixnet.com DEC 2010 © 2010. Sixnet. All Rights Reserved. 5