ST-GT-1210 Datasheet

331 Ushers Road, P.O. Box 767, Clifton Park, NY 12065 USA
+1 (518) 877-5173, Fax +1 (518) 877-8346
email: [email protected] www.sixnetio.com
Makes Your Job Easier
I/O Controller
Industrial I/O Controller for Ethernet I/O, RS485 I/O, or Modbus I/O
Process Control, SCADA, and RTU functionality
IEC 61131-3 programming with all five languages supported
Datalogging and peer-to-peer I/O transfers
Ethernet, RS232, RS485, and local I/O expansion
Supports more than 40 SIXNET I/O module types
Interface to other vendor’s Modbus I/O
Flexible communications
Supports Open Modbus/TCP, ASCII, and RTU
Supports telephone, wireless and other links
Compact DIN-rail industrial package
Industrial I/O Controller
for SIXNET and Modbus Systems
The SixTRAK I/O Controller (ST-GT-1210) can
run an ISaGRAF IEC 61131-3 program. perform
datalogging, and interface to thousands of I/O,
all in real-time. Select this unit when you need a
reliable way to control or monitor Ethernet, RS485,
or local I/O, and then connect to a supervisory
computer. It is perfectly suited for most control
and data acquisition applications where some PLCstyle programming is required.
Zone 2, UL, CSA, CE, and DNV rated
-30 to +70°C operating temperature range
Control I/O from
Ethernet I/O
Other Modbus Devices
This one I/O controller replaces most of
SIXNET’s legacy programmable SixTRAK I/O
gateways (part numbers ST-GT-xxx-##P).
SIXNET I/O controller selection guide
Product
Description
Maximum
Memory
ET-GT-ST-2
I/O Concentrator
128K
—
ST-GT-xxx-##P
Legacy I/O Gateway *
2M
—
ST-GT-1210
I/O Controller
ST-IPM-####
Open Controller
RS485 Modbus I/O
LINUX
ISaGRAF
Enabled Programs
Local I/O
Datalogging
Total
Ports
232
Ports
485
Ports
Ethernet
Ports
—
—
3
1
1
1
1
Yes
2
1
1
1
512K & 16M OEM Only
1
Yes
3
1
1
1
2M & 16M+
4
Yes
3
1
1
1
Yes
* Note: The ST-GT-1210 replaces the legacy SixTRAK programmable I/O gateways (ST-GT-xxx-##P).
SIXNET z PO Box 767 z Clifton Park, NY 12065 USA z +1 (518) 877-5173 z Fax +1 (518) 877-8346 z [email protected] z www.sixnetio.com
Performance Specifications
General
Memory for programming
Memory for datalogging
I/O registers
Configuration & diagnostics
Datalogging support
IEC 61131 programming
32-bit CPU
16 Meg Flash and 16 Meg dynmaic RAM
512K battery-backed static RAM
Up to 50,000
SIXNET I/O Tool Kit software
Yes – SIXNET Sixlog
Yes – SIXNET ISaGRAF
SixTRAK I/O (ST-BUS) port
SixTRAK I/O specs.
ST-BUS specs.
Ethernet port
Connection
Isolation
Protocols
Serial ports
RS232 port
RS485 port
RS485 network
RS485 distance
Flow control
Protocols
Modes
Environmental
Power
Temperature
Humidity
Electrical Safety
EMI emissions
Up to 20 modules (640 I/O)
See individual data sheets
See user manual for details
10/100BaseTx auto-sensing
RJ45 (TD,RD,CTS,RTS,CD,DTR,DSR,GND)
1200 VRMS 1 minute
Modbus and SIXNET over TCP or UDP
Up to 115,200 baud
RJ45 (TD,RD,CTS,RTS,CD,DTR,DSR,GND)
Screws (485+, 485-, GND) 2-wire half-duplex
Up to 32 (full-load) stations
Up to 0.5 miles (1 Km)
Hardware, software, half/full-duplex modem
Modbus RTU, Modbus ASCII, and SIXNET
Master, slave, and passthru
DIN rail or flat panel mount
10-30 VDC; 3 watts typ. (less modules)
-30 to +70°C (-40 to +85°C storage)
5% to 95% RH (non-condensing)
UL 508, CSA C22.2/14; EN61010-1;
FCC part 15, ICES-003, Class A;
EN55022; EN61326-1;
EN61326-1 (EN61000-4-2,3,4,6);
IEEE-472 (ANSI C37.90)
IEC68-2-6
UL 1604, CSA C22.2/213,
Cenelec EN50021 Zone 2
DNV (Det Norske Veritas)
EMC immunity
Surge withstand
Vibration
Hazardous locations
(Class 1, Div 2, Groups A,B,C,D)
Marine & Offshore
Specifications are subject to change. Consult factory for latest information.
20
RS232
(RJ45)
1 RI/DSR in
2 DCD in
3 DTR out
4 GND
5 RXD in
6 TXD out
7 CTS in
8 RTS out
(EIA/TIA-561)
2.92"
[7.42 cm]
SixTRAK I/O Controller
See SixTRAK ordering guide
See EtherTRAK ordering guide
See RemoteTRAK ordering guide
Industrial telephone modem for remote access
Universal AC/DC to 24 VDC power supply
SIXNET I/O Tool Kit software for configuration
and diagnostics (Level 1 is free)
PAK####-### *
Complete Packaged System – ready for installation
*Note: See separate SIXNET ordering guide for details.
G+
-T
Power (10-30 VDC) &
ST-BUS
ST A
ST B
Chassis / Shield GND
Power + Input (ST C)
Power - Input (ST D)
0.25"
[0.64 cm]
SixTRAK
I/O CONTROLLER
Front View
Note: Replaces legacy programmable SixTRAK Gateways (ST-GT-xxx-##P).
Accessories
Local I/O modules
Ethernet I/O modules
RS485 I/O modules
VT-MODEM-1WW
RM-PS-024-01F
SXTOOLS-# *
RS485
Port
1 2 3 4 5 6 7 8 9
Ordering Information
ST-GT-1210
Ethernet
(RJ45)
1 TX+
2 TX3 RX+
6 RX-
ST-GT
0.17"
[0.43]
(clear for
#8 screw)
SIXNET
DIN EN
50022
(not
included)
4.47" [11.35 cm]
4.75" [12.07 cm]
Side View
1.85"
[4.70 cm]
1.65"
[4.19 cm]
3.17" [8.05 cm]
SIXNET z PO Box 767 z Clifton Park, NY 12065 USA z +1 (518) 877-5173 z Fax +1 (518) 877-8346 z [email protected] z www.sixnetio.com