平成 仕様書番号 年 月 Ref.CE-P679 03/10 日 殿 納 入 仕 様 書 品 名： L250-LENS15 型 番： 516-A00070 ＜提出： 部 返却： 目 頁 1 2 3 4 項 寸法外形図 梱包図 物理的性質 目 部＞ 次 図 番 AL2-033-03 頁 5 6 7 8 項 目 図 番 受 領 印 シチズン電子株式会社 シチズン電子株式会社 〒403-0001 営 承 業 認 山梨県富士吉田市上暮地 1-23-1 TEL (0555)23-4121（代） FAX (0555)24-2426 検 印 担 当 書式 No. GQP-0013-F01-2 1 ★ 6 5 4 3 2 1 1 10.01.13 09.12.03 Mark Date ±0.1 ±0.2 ±0.2 ±0.3 ±0.3 ±0.5 ±0.45 ±0.8 ±0.7 ±1.2 ±1° ±0.3 ±0.5 ±1.0 ±1.5 ±2.0 43.7 8° General tolerances refer leftward table Angles refer leftward table Alternation Drawn K.Matsuyama Checked K.Sasuga Approved K.Funakubo Unit Scale mm 2/1 Dimensions Adjustment of fit full-fledged revision Description Appro. 0.2 max 3 0.8 1 Remarks 1 This drawing for Citizen Electronics Co., LTD. : CL-L250 series only 2 Material: PC 3 The angle R without directions is set to 0.2. 4 No scratches, stain, etc allowes. 6 Dimension is based on as follows. LIMITS UNLESS OTHERWISE NOTE ±0.05 ±0.08 ±0.1 ±0.18 ±0.28 gate 60° Φ 26.58 Φ 11.4 0.5 L≦6 6＜L≦18 18＜L≦50 50＜L≦120 120＜L≦400 Angle 5.1 3.2 5 max 2.5 (gate) 2.3 Φ 29 This drawing is the property of Citizen Electronics Co.,LTD. and should not be disclosed to any third party without prior permission of Citizen Electronics Co.,LTD. 13.8 Symbol Name Part No. Drawin No. Date L250-LENS15 Lens 516-A00070 AL2-033-03 2009.07.14 CITIZEN ELECTRONICS Co.,ltd 書式No.GQP-0302-F04-1 (RQP-0302-F10-0,UQP-U302-F04-0) Ref.CE-P679 03/10 This drawing is the property of Citizen Electronics Co.,LTD. and should not be disclosed to any third party without prior permission of Citizen Electronics Co.,LTD. Lens stack 10 tray (Max) + empty tray as top cover Cardboard Tray Bag 100pcs./tray Max1000pcs./bag Label CITIZEN ELECTRONICS CO., LTD. Part Name L250-LENS15 Part No. 516-A00070 Label Cardboard Lot No. Quantity Date arbitrary size QC 7 6 5 4 3 2 1 Mark General tolerances Symbol Name Part No. Dimensions Angles Drawn Checked Approved Date Description Appro. Scale Alternation K.Matsuyama K.Sasuga K.Funakubo free / Unit L250-LENS15 packing specification Drawin No. Date mm 2010/01/13 CITIZEN ELECTRONICS Co.,ltd 書式No.GQP-0302-F04-1 (RQP-0302-F10-0,UQP-U302-F04-0) Ref.CE-P679 03/10 PHYSICAL PROPERTIES Property Test Method Condition Unit ASTM D 1003 ASTM D 542 3mm - % - 88 1.585 1mm/min 50mm/min 50mm/min 50mm/min 2mm/min 2mm/min unnoched noched M scale MPa MPa % % MPa MPa kJ/m2 kJ/m2 - 2400 62 6 >50 2400 94 NB 58 77 1.8MPa 0.45MPa 50℃/h 50N 300℃ load 1.2kg parallel vertical ℃ ℃ ℃ 3 cm /10min x10-4/k x10-4/k 125 138 142 24 0.7 0.7 short time test 100Hz 1MHz 100Hz 1MHz - Ω Ωm MV/m x10-4 x10-4 - >1015 >1013 30 3.1 3 10 90 225 Density ISO 1183 kg/m3 Water absorption at 23℃ ISO 62 In water 24h % Flammability UL94 class *Values reported are typical and should not be used for specification purpose. 1200 0.2 HB Optical Light transmission Reflective Index Mechanical Tensile modulus Tensile strength at yield Tensile strain at yield Nominal tensile strain at break Flexual modulus Flexual strength Charpy impact strength Rockwell hardness ISO 527-1 and ISO 527-2 ISO 178 ISO 178 ISO 179 ISO 179 ISO 2039-2 Thermal Heat deflection temperature Vicat softening point Melt volume flow rate Coefficient of linear expansion ISO 75-1 and ISO 75-2 ISO 306 ISO 1133 ISO 11359-2 Electrical Surface resistivity Volume resistivity Withstand voltage IEC 60093 IEC 60093 IEC 60243-1 Specific Inductive capacity IEC 60250 Dielectric loss tangent IEC 60250 Tracking resistance IEC 60112 Other Ref.CE-P679 03/10