DOMINANT Opto Technologies Innovating Illumination DomiLED TM DATA SHEET: DomiLEDTM AlInGaP : DRx-MJS TM Synonymous with function and performance, the DomiLED series is perfectly suited for a variety of cross-industrial applications due to its small package outline, durability and superior brightness. TM Features: > High brightness surface mount LED using thin film technology. > 120° viewing angle. > > > > > > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. Qualified according to JEDEC moisture sensitivity Level 2. Compatible to both IR reflow soldering. Environmental friendly; RoHS compliance. Compliance to automotive standard; AEC-Q101. Superior corrosion resistant. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Signage: full colour display video notice board, signage, special effect lighting. > Industrial: white goods (eg: Oven, microwave, etc.), light bar, illuminated advertising. © 2005 DomiLED is a trademark of DOMINANT Opto Technologies. All rights reserved. Product specifications are subject to change without notice. 1 03/12/2015 V11.0 DOMINANT TM Opto Technologies AlInGaP : DRx-MJS Innovating Illumination Optical Characteristics at Tj=25˚C Part Ordering Number Color Viewing Angle˚ Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. DRS-MJS-UV1-1 Super Red, 632nm 120 450.0 675.0 900.0 DRR-MJS-U2V-1 Red, 625nm 120 560.0 900.0 1125.0 DRA-MJS-VW1-1 Amber, 615nm 120 715.0 1125.0 1400.0 DRO-MJS-VW1-1 Orange, 605nm 120 715.0 1125.0 1400.0 DRY-MJS-VW1-1 Yellow, 587nm 120 715.0 1125.0 1400.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Wavelength binning is carried for all units as per the wavelength-binning table. Only one wavelength group is allowed for each reel. 4. An optional Vf bining is also available upon request. Bining scheme is as per following table. Electrical Characteristics at Tj=25˚C Part Number DRx-MJS Vf @ If = 20mA Min. (V) 1.8 Vr @ Ir = 10uA Typ. (V) Max. (V) 2.1 2.6 Min. (V) 12 Forward voltages are measure using a current pulse of 1 ms and with an accuracy of ± 0.1V. Absolute Maximum Ratings Maximum Value Unit DC forward current 50 mA Peak pulse current; (tp ≤ 10µs, Duty cycle = 0.10) 100 mA Reverse voltage 12 V ESD threshold (HBM) 2 kV 120 ˚C Operating temperature -40 … +100 ˚C Storage temperature -40 … +100 ˚C 140 mW 360 K/W 150 K/W LED junction temperature Power dissipation (at room temperature) Thermal resistance - Junction / ambient, Rth JA - Junction / solder point, Rth JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 2 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Characteristics Symbol Temperature coefficient of dom (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of VF (typ) IF = 20mA; 0 ˚C <= T <= 100 ˚C Temperature coefficient of IV (typ) IF =20mA; 0 ˚C <= T <= 100 ˚C TC Part Number dom (typ) TCV TCIV 3 Value DRS-MJS 0.06 DRR-MJS 0.09 DRA-MJS 0.07 DRO-MJS 0.09 DRY-MJS 0.10 DRS-MJS -5.9 DRR-MJS -3.3 DRA-MJS -2.3 DRO-MJS -2.0 DRY-MJS -1.7 DRS-MJS -0.5 DRR-MJS -0.6 DRA-MJS -0.7 DRO-MJS -0.9 DRY-MJS -1.0 Unit nm / K mV / K %/K 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Wavelength Grouping at Tj=25˚C Color Group Wavelength distribution (nm) DRS; Super Red Full 625 - 640 DRR; Red Full 620 - 630 DRA; Amber Full 610 - 621 W 610 - 615 X 615 - 621 Full 600 - 612 W 600 - 603 X 603 - 606 Y 606 - 609 Z 609 - 612 Full 582 - 594 W 582 - 585 X 585 - 588 Y 588 - 591 Z 591 - 594 DRO; Orange DRY; Yellow Dominant wavelength is measured with an accuracy of ± 1 nm. Luminous Intensity Group at Tj=25˚C Luminous Intensity IV (mcd) Brightness Group U1 450.0...560.0 U2 560.0...715.0 V1 715.0...900.0 V2 900.0...1125.0 W1 1125.0...1400.0 Luminous intensity is measured with an accuracy of ± 11%. 4 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Vf Bining (Optional) Forward Voltage (V) Vf @ If = 20mA V1 1.80 ... 1.95 V2 1.95 ... 2.10 V3 2.10 ... 2.25 V4 2.25 ... 2.40 V5 2.40 ... 2.55 V6 2.55 ... 2.70 Forward voltage, Vf is measured with an accuracy of ± 0.1V. Please consult sales and marketing to incorporate special part number to incorporate Vf binning. 5 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Relative Intensity Vs Forward Current Forward Voltage Vs Forward Current IF (mA) Vf (V) Relative Intensity; Normalized at 50mA Relative Intensity; Normalized at 20mA Relative Intensity; Normalized at 20mA Forward Voltage, V Forward Current (mA) mA Forward Current; Forward ForwardCurrent; Voltage,mA V Luminous Flux; Normalized at 80mA 2.5 12.5 2 2.0 0.8 2 1.5 1.5 0.61.5 1 0.41.0 1 0.5 0.5 0.20.5 0 0 10 10 0 00 10 1020 20 30 40 50 40 2.4 50 2.4 30 40 2 30 20 20 2 10 10 1.6 60 40 Forward Current; 30 50 3040 60 mA 70 80 60 20 2040 30 50 60 0 01.6 0 50 10 20 40 50 60 70 80 80 2.32.4 Forward Voltage (V) Forward Voltage; Forward Current, mAVV Forward Voltage; Forward Current, mAmA Forward Current; Forward Current Vs Ambient Temperature Relative Intensity Vs Wavelength Maximum Current Ambient Temperature Maximum Current VsVs Ambient Temperature 60 1 Relative Intensity RelativeIntensity IntensityVs vsWavelength Wavelength Relative Vs Wavelength 0.9 8060 50 1 11 Forward Current, mA Forward Current, mA Forward Current; mA 0.8 Relative Intensity 60 40 30 50 20 4030 3020 10 0 10 20 30 40 50 60 70 80 90 100 0.7 0.8 0.80.8 0.6 0.7 0.70.7 0.5 0.6 0.60.6 0.4 0.5 0.50.5 0.3 0.4 0.40.4 0.2 0.3 0.30.3 0.1 0.2 0.20.2 0 0.1 0.10.1 0 00 Ambient Temperature 0 0 10102020303040 4050 5060 6070 7080 8090 90 100100 a Red Amber Super Red Amber RedRed Orange 0.9 0.90.9 70 50 40 Yellow Yellow Yellow Super R Red Amber Amber Super Red 500 500 500 500 550 550 550 550 600 650 700 Wavelength; 600 650nm 700700 600 650 600 650 700 Yellow 750 750750 750 Wavelength Wavelength; nm Ambient Temperature Ambient Temperature Allowable Forward Current; mA Allowable Current,mA mA MaximumForward Pulse Current; 30 Current, 10 20Forward 40 60 2.270 1.8 1.8 1.930 22 50 2.1mA 2.2 1.70 1.6 IF, mA Wavelength; nm Allowable Forward Current Vs Maximum Pulse Current Vs Duty DutyRatio Cycle ( Ta=25 Deg C, tp≤10uS ) 1000 Allowable Forward Current Vs Duty ratio Radiation Pattern 30° 20° 10° 0° Relative Intensity vs Wavelength 1.0 1 1000 a 40° 0.9 Super R 0.8 0.8 50° 100100 60° 70° 10 1 1 Red 0.7 Amber 0.6 0.6 0.5 Yellow 0.4 0.4 0.3 0.2 0.2 80° 0.1 10 1 Flux Normalized @ 70mA 70 50 2.8 1.2 3 2.5 0 0 Cy Current VsForward Forward Voltage Forward Vs Current 2.8Forward ForwardVoltage Current Vs Forward Voltage Luminous Flux Vs Forward Current 20 10 0 10 Cx Forward Current vs Forward Voltage Relative Intensity VsVs Forward Current Relative Intensity Forward Current 3 00.0 0 Flux (lm) 10 Duty Ratio, % Duty (%); Tp<=10us 10 Duty Ratio, % 90° 100 0 0 500 550 600 650 700 750 Wavelength 100 6 03/12/2015 V11.0 Relative Intensity vs Wavelength DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination DomiLED • AllnGaP : DRx-MJS Package Outlines TM Note : Primary thermal path is through Cathode lead of LED package Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Epoxy Soldering Leads Sn-Sn Plating 7 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Recommended Solder Pad 8 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Taping and orientation • Reels come in quantity of 2000 units. • Reel diameter is 180 mm. 9 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Packaging Specification 10 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Packaging Specification Existing BPL Moisture sensitivity level size - 87mm x 45mm. As part of improvement and also in response to customers’ request; BPL f Barcode label changed to the following. DOMINANT Opto Technologies (L) Lot No : lotno ML TEMP 2 260˚C RoHS Compliant (P) Part No : partno (C) Cust No : partno (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no New BPL size - 110mm x 55mm. Additional information are now included in the label. 2D and 3D barc Reel implemented now for every data field. Label Moisture absorbent material + Moisture indicator Issue No : 1 The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Weight Weight(gram) (gram) Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) 0.034 0.034 240 ± 10 190 10 Cardboard Box DOMINANT TM For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 11 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 255-260˚C 10-30s 275 250 225 Temperature (˚C) Ramp-up 3˚C/sec max. 217˚C 200 60-150s 175 150 125 Rampdown 6˚C/sec max. 100 75 Preheat 60-180s 50 25 480s max 0 50 100 150 200 Time (sec) 12 03/12/2015 V11.0 DOMINANT TM AlInGaP : DRx-MJS Opto Technologies Innovating Illumination Revision History Page Subjects Date of Modification - Initial Release 04 Aug 2009 2 Update on Power Dissipation --> 140mW 08 Dec 2009 - Update company name 31 May 2010 2 Add partno: DRS-MJS-UV1-1 18 Nov 2010 2 Add partno: DRO-MJS-VW1-1 24 Feb 2012 4 Add Vf Binning 03 Sep 2012 2 Add Thermal Resistance 26 Apr 2013 5 Update graph: Relative Intensity Vs Forward Current 11 Dec 2013 3 Add Characteristics 24 Jul 2014 1, 11 1, 5, 7 Add Features Update Packaging Specification Add Features Update Graph: Forward Current Vs Forward Voltage and Relative Intensity Vs Forward Current Add Graph: Allowable Forward Current Vs Duty Ratio Add Remarks in Package Outline 26 Oct 2015 03 Dec 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, DOMINANT Opto Technologies does not assume any liability arising out of the application or use of any product described herein. DOMINANT Opto Technologies reserves the right to make changes to any products in order to improve reliability, function or design. DOMINANT Opto Technologies products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of DOMINANT Opto Technologies. 13 03/12/2015 V11.0 DOMINANT TM Opto Technologies AlInGaP : DRx-MJS Innovating Illumination About Us DOMINANT Opto Technologies is a dynamic Malaysian Corporation that is among the world’s leading SMT LED Manufacturers. An excellence – driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certified quality assurance acclaim, DOMINANT’s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, DOMINANT’s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about DOMINANT Opto Technologies can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: DOMINANT Opto Technologies Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: [email protected] DOMINANT Opto Technologies Innovating Illumination TM