60 MHz SAW Filter 1.26 MHz Bandwidth Part Number: SF0060BA03212T DESCRIPTION • • • 60 MHz SAW bandpass filter with 1.26 MHz bandwidth. 35.1 x 20.6 mm 24-pin DIP package. RoHS compliant. TYPICAL PERFORMANCE Amp 10 dB/div Amp 1 dB/div Phase 4 deg/div Center = 60 MHz, 2 MHz/div (25 kHz incr) S11 (50-70 MHz) S22 (50-70 MHz) Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0060BA03212T Rev A ECN 36650 9-Feb-2010 Page 1 of 3 60 MHz SAW Filter 1.26 MHz Bandwidth Part Number: SF0060BA03212T SPECIFICATION Parameter Center Frequency (Fc) 1 1dB Bandwidth 2 3dB Bandwidth 2 55dB Bandwidth 2 Device Delay Insertion Loss (over 1dB BW) Passband Amplitude Ripple 3 Passband Phase Ripple 3 Triple Travel and Spurious Input VSWR (@ Fc at 23C) Output VSWR (@ Fc at 23C) Temperature Coefficient 4 Source and Load Impedance Ambient Temperature Notes: 1. 2. 3. 4. Min 59.98 1.26 2.9 55 - Typ 60.00 1.61 1.85 3.4 2.93 29.8 0.3 0.5 58 1.35 1.35 -0.032 50 25 Max 60.02 1.92 4.2 3 34 0.4 2 1.5 1.5 - Units MHz MHz MHz MHz us dB dB p-p deg p-p dB :1 :1 ppm/°C2 Ω ˚C Defined as the average of the lower and upper 3 dB frequencies at room ambient. All dB levels are defined relative to the insertion loss. Evaluated over the minimum 1 dB bandwidth. Temperature Coefficient inflection (Turnover) is approximately 45ºC. MAXIMUM RATINGS Parameter Storage Temperature Range Operating Temperature Range Input Power Level Min Max -40 -25 - 85 85 13 Units ˚C ˚C dBm MATCHING CIRCUIT 3 15 Input 50 Ω Single-ended Output 50 Ω Single-ended 22 Ls1 = 470 nH Ls2 = 509 nH 10 Rp1 = 910 Ω Rp2 = 1100 Ω Notes: • Recommend 2% toleranced matching components. Typical Inductor Q=40. • Values shown are for guidance only and may change depending upon board layout. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0060BA03212T Rev A ECN 36650 9-Feb-2010 Page 2 of 3 60 MHz SAW Filter 1.26 MHz Bandwidth Part Number: SF0060BA03212T PACKAGE OUTLINE Units: mm Tolerances are ±0.15 mm except where indicated. Pin Configuration: Input: 3 Input Return: 22 Output: 15 Output Return: 10 Ground: All other pins SMI BA03212T ∆ YYDDD Date Code (YY=year, DDD=Day) ESD Symbol ISO 9001 Registered All specifications are believed to be accurate and reliable. However, Spectrum Microwave reserves the right to make changes without notice. © 2010 All rights reserved. Spectrum Microwave 400 Nickerson Road, Marlborough, MA 01752, USA • Phone 1-508-251-6400 • Fax 1-508-251-6401 www.SpectrumMicrowave.com DSSF0060BA03212T Rev A ECN 36650 9-Feb-2010 Page 3 of 3