V I S H AY I N T E R T E C H N O L O G Y, I N C . ESD Protection Diodes EMI Filters Multi-Channel EMI Filters in LLP Leadless Packages KEY BENEFITS • C hoice of four-, six-, and eight-channel versions • Ultra-compact footprint with a low profile of 0.6 mm and a pin-to-pin pitch of 0.4 mm for board space savings • Attenuate unwanted signals by more than 28 dB over a frequency range of 900 MHz up to 2.3 GHz • Offer resistance of 100 Ω and an input capacitance of 60 pF • Low leakage current helps to prolong battery life • Provide transient protection for data lines as per IEC 61000–4-2 (ESD) at 30 kV (air and contact discharge) and IEC 61000–4-5 (lightning) from 4 A (tp = 8/20 μs) RESOURCES • Datasheet: VEMI45AA-HNH - http://www.vishay.com/doc?81385 VEMI65AA-HCI - http://www.vishay.com/doc?81384 VEMI85AA-HGK - http://www.vishay.com/doc?81386 • For technical questions contact [email protected], [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0059-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . ESD Protection Diodes EMI Filters SPECIFICATIONS PART NUMBER CHANNELS TYPICAL LINE RESISTANCE (Ω) TYPICAL CUT-OFF FREQUENCY (MHz) PACKAGE TYPE VEMI45AA-HNH 4 100 100 LLP1713 VEMI65AA-HCI 6 100 100 LLP2513 VEMI85AA-HGK 8 100 100 LLP3313 APPLICATIONS ESD protection in portable electronics for mobile computing, mobile communication, consumer, industrial, and medical applications ELECTRICAL CHARACTERISTICS Ratings at 25 °C, ambient temperature unless otherwise specified VEMIX5AA-SERIES — All inputs to ground PARAMETER Reverse stand-off voltage TEST CONDITIONS/REMARKS Max. reverse working voltage SYMBOL MIN. V TYP. MAX. UNIT RWM – – 5 V Reverse voltage at IR = 1 μA VR 5 – – V Reverse current at VR = VRWM I R – – 1 μA Reverse breakdown voltage at IR = 1 mA V BR 6 – – V acc. IEC 61000-4-5 I PPM 4 – – A at IPP = 1 A applied at the input, measured at the output; acc. IEC 61000-4-5 V – – 7 V at IPP = IPPM = 4 A applied at the input, measured at the output; acc. IEC 61000-4-5 V C-out – – 8 V at IPP = - 1 A applied at the input, measured at the output; acc. IEC 61000-4-5 V C-out -1 – – V at IPP = IPPM = - 4 A applied at the input, measured at the output; acc. IEC 61000-4-5 V C-out - 1.2 – – V Maximum surge current Positive clamping voltage Negative clamping voltage Input capacitance ESD-clamping voltage Protection paths Line resistance PRODUCT SHEET C-out at VR = 0 V; f = 1 MHz C – 60 – pF at VR = 2.5 V; f = 1 MHz C in – 36 – pF CESD – 7.5 – V channel – – 4, 6 or 8 channel 90 100 110 Ω in at ± 30 kV ESD-pulse acc. IEC 61000-4-2 V Number of channels which can be protected N Measured between input and output; IS = 10 mA 2/2 R S VMN-PT0059-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000