V I S H AY I N T E R T E C H N O L O G Y, I N C . ESD Protection Diode VCUT07B1-HD1 Bidirectional Symmetrical (BiSy) Single-Line ESD Protection Diode in Ultra-Compact LLP1006-2L Package KEY BENEFITS • Ultra-compact LLP1006-2L package –– Small footprint: 1.0 mm by 0.6 mm –– Extremely low profile: 0.38 mm • Low capacitance: 14 pF • Low leakage current of < 0.1 µA at the working voltage of ± 7 V • Reverse breakdown voltage of 7.3 V minimum at 1 mA • Maximum clamping voltage of 15 V at 4 A • High-surge protection according to IEC 61000-4-5 at 4 A • Environmentally friendly “green” specifications, Lead (Pb)-free devices APPLICATIONS • ESD protection in portable electronics, including notebook computers and smartphones RESOURCES • Datasheet: VCUT07B1-HD1 – http://www.vishay.com/doc?84137 • For technical questions, contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0321-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VCUT07B1-HD1 www.vishay.com VCUT07B1-HD1 Vishay Semiconductors V I S H AY INTER T E C H N O L O G Y, I N C . www.vishay.com Bidirectional Symmetrical (BiSy) Singl VCUT07B1-HD1 Vishay Semiconductors Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode VCUT07B1-HD1 www.vishay.com in LLP1006Vishay Semiconductors ESD Protection Diode Bidirectional Symmetrical (BiSy) Single Line ESD-Protection Diode www.vishay.com in LLP1006-2L Vishay Semiconductors FEA VCUT07B1-HD1 VCUT07B1-HD1 LLP1006-2L Bidirectional Symmetrical in (BiSy) Single Line ESD-Protection Diode • Ult FEATURES www.vishay.com • Lo Bidirectional Symmetrical in (BiSy) Single Line ESD-Protection Diode LLP1006-2L • Ultra compact LLP1006-2L package Vishay Semiconductors FEATURES • 1-l •• Low < 0.4 mm in LLP1006-2L Ultrapackage compactprofile LLP1006-2L package • Wo FEATURES •• Low 1-linepackage ESD-protection Bidirectional Symmetrical (BiSy) Single-Line ESD Diode profile < 0.4 mm Bidirectional Symmetrical (BiSy) Single Line ESD-Protection • Lo • Working Ultra compact package FEATURES rangeLLP1006-2L ±7V • 1-line ESD-protection 21129 • Lo Protection Diode in Ultra-Compact LLP1006-2L Package in LLP1006-2L profile < 0.4 mmμA leakage current ••• Low Ultrapackage compact LLP1006-2L Working range ± 7 V IR < 0.1package www.vishay.com 1 1 1 2 20855 2 21129 1 2 20855 2 21129 2 1 MARKING (example only) 20855 MARKING (example only) 20855 21129 XY MARKING (example XY only) XY XY MARKING (example only) ORDERING INFORMATION XY ORDERING INFORMATION 21129 2 1 MARKING (example only) Bar = pin 1marking 21129 X = date code Bar = pin 1marking Y = type code (see table below) X = date code Bar = pincode 1marking Y = type (see table below) X = date code Bar = pin 1marking Y = date type code X= code (see table below) 20855 21121 21121 20855 21121 21121 NAME ORDERING CODE Y DEVICE = type code (see table below) BarORDERING = pin 1marking DEVICE NAME INFORMATION VCUT07B1-HD1-G4-08 ORDERING CODE VCUT07B1-HD1 X = date code VCUT07B1-HD1 VCUT07B1-HD1-G4-08 INFORMATION DEVICE NAME ORDERING CODE Y =ORDERING type code (see table below) PACKAGE DATA 21121 1-linepackage ESD-protection = 14 •••• Low load capacitance C<D0.1 Low profile <IR0.4 mm μApF leakage current FEATURES MARKING only) •• ESD-protection Working range(example ±acc. 7 VIEC 61000-4-2 1-lineload ESD-protection • Low capacitance CD = 14 pF ± 30 compact kV contact discharge μA Low leakage current IR < 0.1 •• Ultra LLP1006-2L package Working range ±acc. 7 VIEC • ± ESD-protection 61000-4-2 30 kV air discharge Low load capacitance C = 14 pF ••• Low package profile < 0.4 mm D ± 30 kV contact discharge Low leakage current IR < 0.1byμA • ± Soldering can be checked standard vision inspection; 30 kV air discharge ESD-protection acc. IEC 61000-4-2 ••• 1-line ESD-protection LowX-ray loadnecessary capacitance CD = 14 pF 21121 no ± 30 kV range contact discharge Soldering can ±be by standard vision inspection; ••• Working 7 checked V(e4) ESD-protection acc. IECno 61000-4-2 Pin plating NiPdAu whisker growth ± 30 kVpin air discharge Bar = 1marking no X-ray necessary < 0.1 μA NiPd, NiPdAu) (no Sn) •• Low leakage current I ± 30 kV contact discharge R e4 -plating precious metal (e.g. Ag, Soldering can be checked byAu, standard vision inspection; X30 = date code Pin NiPdAu (e4) no whisker growth ± kV air discharge = 14 pF ••• Low load capacitance C D For no X-ray Material categorization: definitions of compliance Y= typenecessary code (see table below) e4 precious metal (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) • Soldering can be checked by standard vision inspection; •• ESD-protection acc.(e4) IEC no 61000-4-2 Pin plating NiPdAu whisker growth please see www.vishay.com/doc?99912 necessary • ±no Material categorization: 30X-ray kV contact discharge For definitions of compliance e4 -plating precious metal (e4) (e.g.no Ag, Au, NiPd, NiPdAu) (no Sn) 30ORDERING kV air discharge •• ±please Pin NiPdAu whisker growth see www.vishay.com/doc?99912 INFORMATION Material categorization: For definitions of compliance ••• Soldering can metal be checked byAu, standard vision inspection; e4 - precious (e.g. Ag, NiPd, NiPdAu) (no Sn) please see www.vishay.com/doc?99912ORDERING CODE no X-ray necessary DEVICE NAME • Material categorization: For definitions of compliance • TAPED Pin plating (e4) no whisker growth UNITS PER REEL please seeNiPdAu www.vishay.com/doc?99912 VCUT07B1-HD1 MINIMUM VCUT07B1-HD1-G4-08 ORDER QUANTITY mm TAPE ONmetal 7" REEL) •(8e4 - precious (e.g. Ag, Au, NiPd, NiPdAu) (no Sn) TAPED UNITS PER REEL MINIMUM ORDER 8000 8000 QUANTITY •(8Material mm TAPEcategorization: ON 7" DATA REEL) For definitions of compliance PACKAGE pleaseUNITS see www.vishay.com/doc?99912 TAPED PER REEL 8000 8000 XY • ES ±3 ±3 • So no • Pin • e4 • Ma ple TAP (8 mm Revision 31-May-12 MINIMUMTYPE ORDER QUANTITY MOLDING COM (8 mm TAPE ON 7" REEL)PACKAGE DEVICE NAME WEIGHT CODE FLAMMABILITY TAPED UNITS PER REEL NAME DEVICE NAME ORDERING CODE MOLDING COMPOUND MINIMUM ORDER VCUT07B1-HD1 VCUT07B1-HD1-G4-08 8000 8000 QUANTITY PACKAGE TYPE MOISTURE SOLDERING (8 mm TAPE ON 7" REEL) PACKAGE DEVICE NAMEDATA WEIGHT LLP1006-2L U 0.72 mg UL 94 V-0 NAME CODE FLAMMABILITY VCUT07B1-HD1 RATING SENSITIVITY LEVEL CONDITIONS ORDERING VCUT07B1-HD1INFORMATION VCUT07B1-HD1-G4-08 8000 8000 PACKAGE TYPE MOLDING COMPOUND MOISTURE SOLDERING DEVICE NAMEDATA WEIGHT MSL level 1 PACKAGE NAME CODE SENSITIVITY LEVEL 260 °C/10 CONDITIONS TAPED UNITS PER REEL VCUT07B1-HD1 LLP1006-2L U 0.72 mg FLAMMABILITY UL 94 V-0RATING s at terminals DEVICE NAME ORDERING CODE MINIMUM ORDER QUANTITY (according J-STD-020) PACKAGE TYPE MOLDING (8 COMPOUND MOISTURE SOLDERING mmABSOLUTE TAPE ON 7" REEL) MSL level 1 MAXIMUM RATINGS PACKAGE DATA DEVICE NAME WEIGHT VCUT07B1-HD1 LLP1006-2L U 0.72 mg FLAMMABILITY UL 94 V-0RATING SENSITIVITY LEVEL 260 °C/10 s at terminals NAME CODE CONDITIONS VCUT07B1-HD1 VCUT07B1-HD1-G4-08 8000 (according J-STD-020) 8000 PARAMETER TEST CONDITIONS PACKAGE TYPE MOLDING COMPOUND MOISTURE SOLDERING ABSOLUTE DEVICE NAME MAXIMUM RATINGS WEIGHT MSL level 1 NAME CODE RATING SENSITIVITY LEVEL 260 CONDITIONS VCUT07B1-HD1 LLP1006-2L U 0.72 mg FLAMMABILITY UL 94 V-0Peak s at terminals pulse(according current J-STD-020) acc.°C/10 IEC 61000-4-5; t = 8/20 μs; single s PARAMETER DATA SYMBOL VALUE UNIT p ABSOLUTE MAXIMUM RATINGS TEST CONDITIONS PACKAGE MSL level 1 Pin 1 to pin 2 VCUT07B1-HD1 LLP1006-2L U 0.72 mg UL 94 V-0 260 °C/10 s at terminals Peak pulse power IPPM J-STD-020) 4 acc. IEC 61000-4-5; A Peak pulse current acc. IEC 61000-4-5; tp = 8/20 μs; single shot tp = 8/20 μs; single s PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT PACKAGE TYPE MOLDING COMPOUND (according MOISTURE SOLDERING DEVICE NAME MAXIMUM RATINGS WEIGHT ABSOLUTE Pin 1 toFLAMMABILITY pin 2 NAME CODE RATING SENSITIVITY LEVEL 60 CONDITIONS Contact discharge acc. IEC 61000-4-2; 10 p 8/20 μs; single shot IP 4 A current acc. IEC 61000-4-5; tp = Peak pulse power W PPM PP acc. IEC 61000-4-5; tp = 8/20 μs; single shot ESD immunity PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT MSL level 1 ABSOLUTE MAXIMUM RATINGS Air discharge acc. IEC 61000-4-2; 10 pul Pin 1 to pin 2 VCUT07B1-HD1 LLP1006-2L Contact U discharge 0.72 acc. mg IEC 61000-4-2; UL 94 10 V-0pulses 260 °C/10 s at terminals Peak pulse W kV PP (according J-STD-020)±60 IP 430 A Peak immunity pulse power current acc. IEC IEC 61000-4-5; 61000-4-5; PPM = 8/20 8/20 μs; μs; single single shot shot acc. ttpp = ESD V PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT Operating temperature Junction temperature ESD Air discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV Pin 1 to pin 2 Contact discharge acc. 61000-4-2; 10 shot pulses ±60 kV Storage temperature = 8/20 μs; single IP 430 A current acc. IEC 61000-4-5; tpIEC Peak immunity pulse power W PPM PP ESD V acc. IEC 61000-4-5; - 40 to + 125 °C Operating temperature Junction ttemperature T ESD p = 8/20 μs; single shot J ABSOLUTE MAXIMUM RATINGS Air discharge acc. 10 pulses ± 30 kV PinIEC 1 to61000-4-2; pin 2 P Peak pulse power 60 W Contact discharge acc. IEC 61000-4-2; 10 pulses 30 kV Storage temperature Tstg - 55 ±to + 150 °C PP acc. IEC 61000-4-5; ttemperature PARAMETER TEST CONDITIONS SYMBOL VALUE UNIT - 40 to + 125 °C 1 to pin 2 or pin 2 t Operating temperature Junction p = 8/20 μs; single shot ESD immunity VT J CHARACTERISTICS ELECTRICAL (pin ESD Air discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV Contact discharge acc.tpIEC 61000-4-2; 10shot pulses = 25 I°C, kV Storage temperature Tstg unless otherwise - 55 ±to + 150specified) °C = 8/20 μs; single 430 A Peak pulse current acc. IEC 61000-4-5; PPM amb ESD immunity V ESD ELECTRICAL CHARACTERISTICS (pinPin1 1IEC toto pin 2 or pin 2 to(Tpin1) - 40 to + 125 °C Operating temperature Junction temperature T J Air discharge acc. 61000-4-2; 10 pulses ± 30 kV pin 2 Peak pulse25 power W PARAMETERPTPP TEST CONDITIONS/REMARKS Storage - 55 60 to + 150 °C °C, unless otherwise (T =pin 8/20 single acc.specified) IEC 61000-4-5; tptemperature amb =temperature - 40 to + 125 °C Operating temperature Junction Tstg ELECTRICAL CHARACTERISTICS (pin 1 to 2 μs; or pin 2 shot to pin1) J Protection paths Number of lines which can be protected Contact discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. Storage temperature T 55 to + 150 °CUNIT = 25 °C, unless otherwise specified) (T stg amb ESD immunity VESD Reverse stand-off voltage Max. reverse working voltage ELECTRICAL CHARACTERISTICS (pin 1 to pin 2 or pin 2 to pin1) Air discharge acc. IEC 61000-4-2; 10 pulses ± 30 kV Protection paths Number lines which can be protected Nchannel 1 lines PARAMETER TESTofCONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. Reverse voltage at°C IRUNIT = 0.1 μA = 25 °C, unless otherwise specified) (T amb 40 to + 125 Operating temperature Junction temperature T J ELECTRICAL CHARACTERISTICS (pin 1working tocan pinbe 2 protected or pin 2 to pin1) -7 V Reverse stand-off Max. voltage RWM Protection paths voltage Number of reverse lines which NVchannel 1 lines =7V Reverse current at°C VRWM Storage temperature TstgMIN. - TYP. 55- to + 150 MAX. PARAMETER TEST CONDITIONS/REMARKS SYMBOL UNIT = 25 °C, unless otherwise specified) (T Reverse voltage at IR = 0.1 μA VR 7 V amb 7 V 1 mA Reverse stand-off voltage Max. reverse working voltage VRWMbreakdown- voltage Reverse at IR = Protection paths Number lines Nchannel 1 lines =can 7 V be protected I 0.1 μA Reverse current at Vwhich PARAMETER TESTofCONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. Reverse voltage at IRRWM 0.1 μA VRR 7 V at IUNIT PP = 1 A ELECTRICAL CHARACTERISTICS (pin 1==working to pin voltage 2 or pin 2 toReverse pin1) 7 Reverse stand-off voltage Max. reverse V 1 mA V 7.3 V breakdown voltage at I clamping voltage RWM R BR Protection paths Number of lines Nchannel 1 at I =lines 7 V be protected IR 0.1 μA Reverse current at Vwhich RWM =can IPPM = 4 A PP 25 °C, unless otherwise specified) (T amb = voltage Reverse atatIRIPP = 0.1 VR 7= 1 μA A 912 V 7- at VR = 0 V; Reverse Max. reverse working VVRWM 1 mA voltage 7.3 V f = 1 MHz breakdown voltage at IR = Reverse stand-off clamping voltage voltage VBR C = 7 V I 0.1 μA Reverse current at V = I = 4 A 15 V at I Capacitance PARAMETER TEST CONDITIONS/REMARKS SYMBOL MIN. TYP. MAX. UNIT RWM R PP PPM = 0.1 μA V 7 Reverse voltage at I at RIPP = 1 A 9 12at VR = 2.5 VV; f = 1 MHz R clamping voltage V = 1 mA V 7.3 V Reverse breakdown voltage at I = 0 V; f = 1 MHz 14 16 pF at V C RI = BR Protection paths Number of lines which can Nchannel --1 lines Reverse current 0.1 μA = =V 4be A protected 15 V atRat IPPV RWM CIRD Capacitance PPM 7 I working = f1=A1voltage 12 V at reverse V =at2.5 V; MHz 11 pF ---97 V Reverse Max. VRWM = 1f = mA VVBR 7.3 V Reverse breakdown voltage = I0RPP V; 1 MHz 14 16 pF at VRRat Reversestand-off clampingvoltage voltage C Capacitance =4A 15 V at I IR==IPPM Reverse voltage 0.1 VCRD 7-9-V at2.5 IPPV; = f1μA 12 V at VRat=PP =A1 MHz 11 pF Rev. 1.1, 31-May-12 1 Reverse clamping voltage V C = 0 V; f = 1 MHz 14 16 pF at V RI VRWM = 7 V I 0.1 μA Reverse current at R = I = 4 A 15 V at PP PPM CD Capacitance For technical questions, contact: ESDpr at V = 2.5 V; f = 1 MHz 11 pF Rev. 1.1, 31-May-12 Document Number: 84137 R VBR 7.3 V Reverse breakdown voltage = 1 MHz 1 14 16 pF at VRat=IR0 =V;1f mA THIS IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PR CD DOCUMENT Capacitance For technical questions, [email protected] at IPP V; = 1f = A 1 contact: -9 12SPECIFIC V at V = 2.5 MHz 11 pF ARE SUBJECT TO DISCLAIMERS, SET FOR Rev. 1.1, 31-May-12 Document Number: 84137 R 1 Reverse clamping voltage VC THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT THE PRODUCTS DESCRIBED HEREIN DOCUMENT = IPPM = NOTICE. 4A - AND THIS15 V at IPP For technical questions, contact: [email protected] ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000Document Number: 84137 Rev. 1.1, 31-May-12 0 V; f = 1NOTICE. MHz 1 THE PRODUCTS DESCRIBED 14 AND THIS16DOCUMENT pF at VR = THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT HEREIN CD Capacitance questions, contact: [email protected] at VR = 2.5 V; f = 1 MHz 11 Document - Number: pF84137 ARE SUBJECTFor TO technical SPECIFIC DISCLAIMERS, Rev. 1.1, 31-May-12 1SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TOFor CHANGE WITHOUT NOTICE. PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT technical questions, contact:THE [email protected] ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT PRODUCT SHEET 2/2SET FORTH AT www.vishay.com/doc?91000 VMN-PT0321-1411 ARE SUBJECT TO SPECIFIC DISCLAIMERS, Rev. 1.1, 31-May-12 Document Number: 84137 1 For technical questions, contact: [email protected] THIS DOCUMENT SUBJECT IS TOSUBJECT CHANGETO WITHOUT THE PRODUCTS DESCRIBED HEREIN AND THISAND DOCUMENT ARE SUBJECT TO THIS IS DOCUMENT CHANGENOTICE. WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000