V I S H AY I N T E R T E C H N O L O G Y, I N C . Diodes SE20AFJ and SE30AFJ 600 V SE20AFJ and SE30AFJ Standard Rectifiers with ESD Capability in Low-Profile SlimSMA™ Package KEY BENEFITS • • • • • • • • High current density ESD capability Oxide planar chip junction Low forward voltage drop of 0.86 V at 2 A Maximum operating junction temperature of 175 °C Ideal for automated placement AEC-Q101 qualified RoHS-compliant APPLICATIONS • General purpose power line polarity protection in consumer and automotive applications RESOURCES • Datasheet: SE20AFJ – http://www.vishay.com/ppg?89954 SE30AFJ – http://www.vishay.com/ppg?89955 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0347-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Diodes SE20AFB thru SE20AFJ SE20AFJ and SE30AFJ www.vishay.com Vishay General Semiconductor Surface Mount ESD Capability Rectifiers Surface-Mount ESD Capability Rectifiers FEATURES • Very low profile - typical height of 0.95 mm SlimSMA FEATURES • Ideal for automated placement • ESD capability • Meets MSL level 1, per • Oxide chip- junction • Very lowplanar profile typical height SE20AFB thru SE20AFJ J-STD-020, LF maximum peak Low mm forward voltage drop, low leakage of•0.95 www.vishay.com Vishay General Semiconductor current of 260 °C • Ideal for automated placement • ESD capability Surface Mount ESD Capability Rectifiers • AEC-Q101 qualified • Oxide planar chip junction Bottom View Top View • Meets MSL level 1, per J-STD-020, LF maximum DO-221AC FEATURES of 260 °C • Lowpeak forward voltage drop, SlimSMA • AEC-Q101 low leakagequalified current • Ideal for automated placement • Material categorization: For definitions of compliance • Oxide planar chip junction SE20AFB thru SE20AFJ please see www.vishay.com/doc?99912 • Low forward voltage drop, low leakage PRIMARY CHARACTERISTICS www.vishay.com TYPICAL APPLICATIONS IF(AV) 2.0 A current Vishay General Semiconductor • ESD capability MECHANICAL DATABottom View Top View 100 V to 600 V VRRM • Very low profile - typical height of 0.95 mm General purpose power line polarity protection, in both consumer and automotive •applications Meets MSL level IFSM 35 A VF at IF = 2.0 A (TA = 125 °C) 0.86 V TJ max. 175 °C Case: DO-221AC (SlimSMA) ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DO-221AC peak of 260 °C Molding compound PARAMETER MECHANICAL DATA 5 μA IR Base P/N-M3 - 1, per J-STD-020, LF maximum meets UL V-0 flammability rating qualified TEST94 CONDITIONS TYP. MAX. UNIT • SYMBOL AEC-Q101 halogen-free, RoHS-compliant, and categorization: • Material For definitions of compliance IF = 1.0 A 0.91 TA = 25 °C SE20AFB thru SE20AFJ commercial grade IF = 2.0 A PRIMARY CHARACTERISTICS please see www.vishay.com/doc?99912 0.96 1.1 V V Case: DO-221AC (SlimSMA) 0.79 I = 1.0 A 2.0 A RoHS-compliant, and halogen-free, www.vishay.com T = 125 °C Vishay General Semiconductor MECHANICAL DATA 100 V to 600 V V = 2.0 A 0.86 0.98 I Molding compound meets UL 94 V-0 flammability rating AEC-Q101 qualified Case: DO-221AC (SlimSMA) 35 A T = 25 °C I 5.0 TYPICAL APPLICATIONS Terminals: Matte tin leads, solderable Base P/N-M3 -Surface halogen-free, RoHS-compliant, and commercial grade I per Reverse Ratedplated V Molding compound meets UL 94 V-0 flammabilityμArating Mount ESD Capability V at I =current 2.0Rectifiers A (T = 125 °C) 0.86 V T = 125 °C 100 SE30AFJ Base P/N-M3SE30AFB - 8halogen-free,thru RoHS-compliant, and J-STD-002 and JESD 22-B102 General Base purpose, power line polarity protection, in both 5 μA I P/NHM3 - halogen-free, RoHS-compliant, and AEC-Q101 qualified Typical reverse recovery time I = 0.5 A, I = 1.0 A, I = 0.25 A t μs commercial grade 1.2 Instantaneous forward voltage IF(AV) Base P/NHM3 - F RRM F FSM F F F A R A (1) A R (2) A R F rr rr FEATURES M3 suffix meets JESD 201 classR1751A www.vishay.com °Cwhisker test, HM3 suffix TJ max. consumer and automotive applications. Vishay General Semiconductor junction capacitance V, 1mm MHz test C P/NHM3 - 12halogen-free, RoHS-compliant, pF and • VeryTypical lowper profile - typical 0.95 meets JESD 201height classof4.0 2 whisker SlimSMA Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 Base AEC-Q101 qualified Notes • Ideal for automated placement Polarity: Color band denotes the cathode end TYPICAL Surface Mount ESDclass Capability Rectifiers M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix JESD 201 2 whisker test Terminals: Matte tin plated leads, solderable per Pulse test:APPLICATIONS 300 μs pulse width, 1meets % duty cycle • Oxide planar chip junction J (1) J-STD-002 and JESD 22-B102 FEATURES M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix 201 class 2 whisker •meets Very JESD low profile - typical height test of 0.95 mm SlimSMA otherwise noted) • ESDTHERMAL capability CHARACTERISTICS (TA = 25 °c unless otherwise band denotes the cathode end •Polarity: Idealnoted) forColor automated placement MSL levelSE20AFD 1, per J-STD-020, LF maximum PARAMETER SE20AFB SE20AFG SE20AFJ UNIT SYMBOL• Meets SE20AFB SE20AFG SE20AFJSYMBOLUNIT • Oxide planarSE20AFD chip junction peak of 260 °C 125 drop, low leakage RJA (1) • Low forward voltage °C/W Typical resistance 20Bthermal 20D 20G 20J (2) • AEC-Q101 qualified MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) current 12 RJM www.vishay.com Vishay General Semiconductor categorization: Notes PARAMETER SYMBOL SE20AFB SE20AFD SE20AFG SE20AFJ UNIT VRRM • Material 100 200For definitions 400 of compliance 600 V capability • ESD (1) Free please see Top View air,www.vishay.com/doc?99912 mounted on recommendedBottom PCB, View 1 oz. pad area; thermal resistance RJA - junction to ambient marking code 20J • 20B Meets MSL20Dlevel 1, 20G per J-STD-020, LF maximum IF (1) (2) Device Mounted on 5.0 mm x 5.0 mm2.0 pad areas, 2 oz. FR4 PCB; RJM - junction to mount A ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) DO-221AC peak of 260 °C (2) Maximum repetitive peak reverse voltage V 100 200 400 600 V (2) Pulse test: Pulse width 40 ms General purpose, power line polarity protection, in both • Low forward drop, low leakage consumer andvoltage automotive applications. current Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless PARAMETER Bottom View Top View SE30AFB thru SE30AFJ DO-221AC Device marking code SE20AFJ Maximum repetitive peak reverse voltage PRIMARY CHARACTERISTICS IF(AV) current Maximum DC forward 2.0 A 100 V to 600 V VRRM IF IR 5 μA TJ max. 175 °C 1.3 MECHANICAL DATA PARAMETER Case: DO-221AC (SlimSMA) Peak forward surgeIFSM current 10 ms single half 35 A sine-wave on rated load VFsuperimposed at IF = 2.0 A (TA = 125 °C) 0.86 V RRM TEST CONDITIONS (1) IF TYP. • SYMBOL AEC-Q101 qualified 2.0 MAX. UNIT A Maximum DC forward current • Material categorization: For definitions of compliance = 1.5STATIC A 0.91 IMMUNITY ELECTRICAL DISCHARGE TO IFSM Molding 35IFV-0 ATHE FOLLOWING 1.3 STANDARDS IF (2) compoundTO meets UL 94 flammability = 25 °C TArating please see www.vishay.com/doc?99912 25 °C-surge unless otherwise (T =noted) 3.0 half A 0.97 1.1 PRIMARY CHARACTERISTICS A =forward Base Instantaneous P/N-M3 halogen-free, and Peak current 10 msIFRoHS-compliant, single forward voltage VF (1) IFSM 35 AV sine-wave superimposed - on 55rated to + 175 °CCONDITIONS 0.79SYMBOL TJ, TSTGcommercial grade IF(AV) 3.0 A = 1.5 A TYPE IFload STANDARD TEST TEST CLASS VALUE TA = 125 °C Vishay General Semiconductor MECHANICAL DATA V to 600 V and VRRM Base Operating P/NHM3 - halogen-free, = 3.0 100 A range 0.86 0.98 IFRoHS-compliant, - 55 to + 175 °C junction and storage temperature TJ, TSTG SE30AFB thru SE30AFJ Operating junction and storage temperature range www.vishay.com Notes (1) Mounted on 5.0 mm x 5.0 mm pad areas, 2 oz. FR4 PCB TYPICAL APPLICATIONS (2) Free air, mounted on recommended copper pad area General purpose, power line polarity protection, in both AEC-Q101-001 Human body model (contact mode) 40 A TA = 25 °C AEC-Q101 qualified IFSM C = 100 pF, R = 1.5 k VC Case: DO-221AC (SlimSMA) - H3B 10 > 8 kV Note: (1) Mounted on 5.0 mm x 5.0 mm pad areas, 2 oz. FR4 PCB, (2) Free air, mounted on recommended copper pad area Notes I Reverse Rated V Molding compound meets UL 94 V-0 flammabilityμArating Surface Mount ESD Capability Rectifiers VMounted at I =current 3.0 (Tmm = 125 °C) V PCBper Terminals: Matte tin leads, on A 5.0 x plated 5.0 mm pad areas,solderable 2 0.86 oz. FR4 T = 125 °C 13 100 (1) F F R A R (2) A Base P/N-M3 - halogen-free, RoHS-compliant, and (2) Free air, J-STD-002 andmounted JESD 22-B102 10 μAarea IR INFORMATION on recommended copper pad ORDERING (Example) Typical reverse recovery time IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A trr μs commercial grade 1.5 FEATURES M3 suffix meets max. 201 class 1A whisker test, 175 HM3 °C suffix TJJESD PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY MODE pF and junction capacitance V, 1mm MHz BaseCJP/NHM3 - 19halogen-free, DELIVERY RoHS-compliant, JESD 201 class 2 whisker •meets VeryTypical low profile - typical height test of4.0 0.95 SlimSMA SE20AFJ-M3/6A 0.032 6A 3500 7" diameter plastic tape and reel AEC-Q101 qualified band denotes the cathode end Notes •Polarity: Ideal forColor automated placement TYPICAL SE20AFJ-M3/6B 0.032 6B 14 000 tin plated 13" diameter plastic tape and reel (1) Terminals: Matte leads, solderable per Pulse test:APPLICATIONS 300 μs pulse width, 1 % duty cycle • Oxide planar chip junction (2) SE20AFJHM3/6A 0.032 6A 7" diameter plastic tape and reel Pulse test: Pulse (1) width 40line ms polarity protection, in both J-STD-002 and3500 JESD 22-B102 General purpose, power • Low forward voltage drop, low leakage (1) M3 suffix meets 1A whisker test, HM3 consumer and automotive applications. SE20AFJHM3/6B 0.032 6B 14 JESD 000 201 class 13" diameter plastic tape andsuffix reel MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) current meets JESD 201 class 2 whisker test Note: (1) AEC-Q101 qualified Note PARAMETER SYMBOL SE20AFB SE20AFD SE20AFG SE20AFJ (T = UNIT • ESD capability CHARACTERISTICS 25 °c unless otherwise noted) (1) THERMAL A Polarity: Color band denotes the cathode end consumer and automotive applications. AEC-Q101 qualified Bottom View Top View Device marking code DO-221AC Maximum repetitive peak reverse voltage SE30AFJ Maximum DC forward current PRIMARY CHARACTERISTICS Peak forward surge current 10 ms single half Revision: 17-Aug-12 sine-wave superimposed on rated load IF(AV) 3.0 A VRRM IF (1) IF (2) IFSM 20J • 20B Meets MSL20Dlevel 1, 20G per J-STD-020, LF maximum SYMBOL SE30AFB PARAMETER peak of 260 200 °C RJA (1) 100 400 600 V Typical thermal resistance (2) • AEC-Q101 qualified MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) RJM 2.0 SE30AFD SE30AFG SE30AFJ 125 °C/W 12 Revision: 17-Aug-12 Document Number: 89954 A 1 • Material categorization: For definitions of compliance Notes 1.3 PARAMETER SYMBOL SE30AFB SE30AFD SE30AFG SE30AFJ UNIT Forwww.vishay.com/doc?99912 technical questions within your region: [email protected], [email protected], [email protected] (1) Free please see air, mounted on recommended PCB, 1 oz. pad area; thermal resistance RJA - junction to ambient marking code THIS DOCUMENT (2) Device 35 30D 30G 30J DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE30B PRODUCTS DESCRIBED HEREIN AND THIS A mm pad areas, 2 oz. FR4 PCB; RJM - junction to mount Number: 89954 1 Mounted on 15 mm x 15 ARE SUBJECT TO SPECIFICDocument DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Maximum repetitive peak reverse voltage VRRM 100 200 400 600 MECHANICAL DATA V to 600 V TJ, TSTG Vquestions ForOperating technical within your 100 region: [email protected], [email protected], [email protected] - 55 to + 175 °C junction temperature range RRM and storage (1) 3.0 I F Case: DO-221AC (SlimSMA) 40 A WITHOUT NOTICE. IFSM IS SUBJECT TO CHANGE Maximum DC forward current THIS DOCUMENT THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT Notes (2) IMMUNITY TO ELECTRICAL STATIC DISCHARGE TO THE FOLLOWING 1.4 STANDARDS Molding compound meets UL 94 V-0 flammability rating IF (Tmm = 125 °C) V PCB SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 F at IF = 3.0 AARE (1) VMounted on A 5.0 x 5.0 mm pad areas, 2 0.86 oz. FR4 25 °C-surge unless otherwise noted) A =forward Base (T P/N-M3 halogen-free, and Peak current 10 ms RoHS-compliant, single half (2) μAarea IR Free air, mounted on recommended copper 10 pad 175 °C TJ max. Revision 17-Aug-12 IFSM sine-wave superimposed on rated loadTEST TYPE commercial grade STANDARD Base AEC-Q101-001 P/NHM3junction - halogen-free, RoHS-compliant, and Operating andHuman storagebody temperature range mode) TJ, TSTG model (contact AEC-Q101 qualified TYPICAL APPLICATIONS General purpose, power line polarity protection, in both consumer and automotive applications. UNIT TEST CONDITIONS 40 SYMBOL - 55 to + 175 C = 100 pF, R = 1.5 k VC V A CLASS A VALUE H3B > 8°CkV Note: (1) 17-Aug-12 Mounted on 5.0 mm x 5.0 mm pad areas, 2 oz. FR4 PCB,2(2) Free air, mounted on recommended copper pad area Notes Revision: Document Number: 89954 Terminals: Matte tin x 15 plated leads, (1) Mounted on 15 mm mmwithin pad areas, 2solderable oz. FR4 PCB per For technical questions your region: [email protected], [email protected], [email protected] (2) Free air, J-STD-002 and JESD 22-B102 mounted on recommended copper pad area ORDERING INFORMATION THIS DOCUMENT IS SUBJECT TO(Example) CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT M3 suffix meets JESD 201ARE class 1A whisker test, HM3DISCLAIMERS, suffix TO SPECIFIC SET FORTH AT www.vishay.com/doc?91000 PREFERRED P/N UNITSUBJECT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE meets JESD 201 class 2 whisker test SE30AFJ-M3/6A 0.032 Polarity: Color band denotes the cathode end SE30AFJ-M3/6B Maximum DC forward current Peak forward surge current 10 ms single half IF (1) IF (2) IFSM 7" diameter plastic tape and reel 13" diameter plastic tape and reel 6A 3500 7" diameter plastic tape and reel 0.032 6B 14 000 13" diameter plastic tape and reel 2/2 VMN-PT0347-1411 3.0 Revision: 17-Aug-12 Document Number: 89955 A 1 1.4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT 40 IS SUBJECT TO CHANGE WITHOUT A ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH NOTICE. THE PRODUCTS DESCRIBED HEREIN ANDAT www.vishay.com/doc?91000 THIS DOCUMENT ARE SUBJECT sine-wave superimposed on rated load THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT - 55 to + 175 Operating junction and storage temperature range TJ, TSTG SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) Mounted on 15 mm x 15 mm pad areas, 2 oz. FR4 PCB 3500 14 000 0.032 Revision: 17-Aug-12 Document Number: 89954 Note: (1) AEC-Q101 qualified 1 Note PARAMETER SYMBOL SE30AFB SE30AFD SE30AFG SE30AFJ UNIT (1) [email protected], For technical questions within your region: [email protected], [email protected] AEC-Q101 qualified Device marking code IS SUBJECT TO CHANGE WITHOUT NOTICE. THE30B 30D 30G 30J DOCUMENT THIS DOCUMENT PRODUCTS DESCRIBED HEREIN AND THIS ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Maximum repetitive peak reverse voltage VRRM 100 200 400 600 V PRODUCT SHEET 6A 6B SE30AFJHM3/6B (1) SE30AFJHM3/6A MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) 0.032 (1) °C TO