V I S H AY I N T E R T E C H N O L O G Y, I N C . RECTIFIERS VSSAF3L45 and VSSAF5L45 45 V TMBS® Rectifiers in Low-Profile SlimSMA™ Package KEY BENEFITS • High current density –– 3 A and 5 A forward currents –– SlimSMA DO-221AC package with typical height of 0.95 mm • Low forward voltage drop down to 0.37 V at 3 A –– Low power losses, high efficiency • Maximum operating junction temperature of 150 °C • Trench MOS Schottky technology • Ideal for automated placement • RoHS compliant • Halogen-free according to JEDEC JS709A standards APPLICATIONS • Low-voltage, high-frequency DC/DC converters, freewheeling diodes, and polarity protection applications in smart phone chargers RESOURCES • Datasheet: VSSAF3L45 – http://www.vishay.com/ppg?89935 VSSAF5L45 – http://www.vishay.com/ppg?89934 • For technical questions contact [email protected] • Material categorization: For definitions of compliance please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components PRODUCT SHEET 1/2 VMN-PT0354-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . RECTIFIERS VSSAF5L45 VSSAF3L45 and VSSAF5L45 www.vishay.com Vishay General Semiconductor Mount Trench MOS Barrier Schottky Rectifier ® Rectifiers 45Surface V TMBS in Low-Profile SlimSMA™ Package FEATURES FEATURES TMBS® SlimSMATM profile - typical height • Very • lowVery profilelow - typical height of 0.95 mm of 0.95 mm • Ideal• forIdeal automated placement for automated placement • Trench MOS Schottky technology • Low power losses, high efficiency • Low power losses, high efficiency • Low forward voltage drop •MSL Lowlevel forward voltage drop • Meets 1, per J-STD-020, LF maximum peak of 260 °C • Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C • Material categorization: For definitions of compliance • see Material categorization: For definitions of compliance please see please www.vishay.com/doc?99912 www.vishay.com/doc?99912 • Trench MOS Schottky technology Bottom View Top View DO-221AC PRIMARY CHARACTERISTICS IF(AV) MECHANICAL DATA 5.0 A TYPICAL APPLICATIONS VRRM 45 V Case:MECHANICAL DO-221AC (SlimSMA) DATA Molding compound meets UL 94 V-0 flammability rating (SlimSMA) Base Case: P/N-M3DO-221AC - halogen-free, RoHS-compliant, and VSSAF3L45 commercial grade 100 A IFSM in low-voltage, high-frequency For use 0.39 VDC/DC VF at IF = 5.0 A inverters, freewheeling diode, www.vishay.com Molding compound meets UL 94 V-0 flammability rating TJ max. 150 °C Vishay General Terminals: Matte tinSemiconductor plated leads, solderable per converters, and polarity protection Baseand P/N-M3 - halogen-free, RoHS-compliant, and J-STD-002 JESD22-B102 applications. Surface Mount Trench MOS Barrier Schottky Rectifier M3 suffix meets JESD 201 class 1A whisker test TYPICAL APPLICATIONS commercial grade VSSAF3L45 Polarity: Color band denotes cathode end For use in low voltage, high frequency inverters, FEATURES www.vishay.com Terminals: Matte tin plated leads, freewheeling, DC/DC converters, and polarity protection • Very low profile - typical height of 0.95 mm TMBS® SlimSMATM applications. J-STD-002 • Ideal for automated placement and JESD22-B102 Vishay General solderable per Semiconductor ELECTRICAL (TA = 25 °C unless otherwise noted) • Trench MOS CHARACTERISTICS Schottky technology M3 suffix meetsTEST JESD 201 class 1A whisker test CONDITIONS SYMBOL TYP. PARAMETER • Low power losses, high efficiency MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) • Low forwardPolarity: voltage drop PARAMETER Device marking code A = 3.0 A IF LF VSSAF5L45 • Meets SYMBOL MSL level 1, per J-STD-020, maximum peak of IF = 1.5 A 260 °C 5L45 DO-221AC TA = 125 °C IFSM 80 A VF at IF = 3.0 A 0.37 V www.vishay.com TJ max. 150 °C Notes (1) Mounted on 10 mm x 10 mm pad areas, 2 oz. FR4 PCB (2) Free air, TYPICAL APPLICATIONS mounted on recommended copper pad area Revision 13-Apr-12 0.46 Notes Molding compound meets UL 94 V-0 flammability rating (1) PARAMETER TEST CONDITIONS SYMBOL TYP. Pulse test:P/N-M3 300I μs pulse width, 1 % duty cycle Base compliant, and A FSM - halogen-free, RoHS100 (2) Pulse test: Pulse width 40 ms IF = 1.5 A 0.41 commercial grade TA = 25 °C = 3.0 A 0.46 IF40 Terminals: Matte tin plated leads, solderable per , T to + 150 °C T J STG (1) Instantaneous forward voltage VF specified) THERMAL (T = 25 °C unless otherwise J-STD-002 CHARACTERISTICS and JESD22-B102 0.31 IF =A1.5 A TA = 125 °C M3 suffix meets JESD 201 class 1A whisker PARAMETER VSSAF3L45 I = 3.0 Atest SYMBOL 0.37 V VSSAF3L45 TM TMBS SlimSMA MAXIMUM RATINGS (TA = 25 °C unless otherwise PARAMETER Device marking code Maximum repetitive peak reverse voltage Bottom View DO-221AC Peak forward surge current 10 ms single half sine-wave superimposed on rated load VSSAF5L45 Operating junction and storage temperature range MAX. 0.54 Vishay General Semiconductor F 0.46 Polarity: Color band denotes cathode end R (1) TAR=JA 25 °C A JM (1) V - 115 512 IR (2) UNIT - VSSAF5L45 Typical thermal currentresistance V = 45 V Surface Mount Trench MOSReverse Barrier Schottky Rectifier T R= 125 °C For use in low voltage, high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. Top View - 0.37 Reverse current Operating junction and storage temperature range Maximum DC forward current 0.54 0.31 V Vishay- General 450 μA Semiconductor IR (2) VR = 45 V 5 25 mA 5.0 TA = 125 °C IF (1) DATA MECHANICAL A Typical junction capacitance 4.0 V, 1 MHz CJ 425 pF 3.0 IF (2)CHARACTERISTICS Case: DO-221AC (SlimSMA) ELECTRICAL (T A = 25 °C unless otherwise noted) VSSAF3L45 Maximum DC forward current PRIMARY CHARACTERISTICS A Peak forward surgeIF(AV) current 10 ms single half 3.0 sine-wave VRRM load 45 V superimposed on rated ® UNIT - 0.46 UNIT VF (1) IF = 3.0 Aof compliance • Material categorization: For definitions please see www.vishay.com/doc?9991245 Vwww.vishay.com TA = 25 °C RRM Maximum repetitive peak reverse voltage MAX. F Instantaneous forward voltage Bottom View Top View I = 1.5 A 0.41 Color band Tdenotes cathode end = 25 °C UNIT μA °C/W VSSAF5L45 mA 450 25 www.vishay.com Note Typical junction capacitance 4.0 V, 1 MHz CJ 425 pF (1) Free air, mounted on recommended PCB, 1 oz. pad area; thermal resistance R JA - junction to ambient, RJM - junction to mount Notes (1) Pulse test: 300 μs pulse width, 1 % duty cycle FEATURES CHARACTERISTICS (T = 25 °C unless otherwise noted) ELECTRICAL (2) ORDERING (Example)A Pulse test: PulseINFORMATION width 40 ms • Very low profile - typical height of 0.95 mm noted) PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. UNIT PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE • SYMBOL Ideal for automated placement VSSAF3L45 IF(T=A2.5 A °C UNIT THERMAL CHARACTERISTICS = 25 unless otherwise specified) 0.42 VSSAF3L45-M3/6A 0.032 3500 7" diameter plastic tape and reel 25 °C TA =6A • Trench MOS Schottky technology 0.47 0.56 IF = 5.0 A 3L45 PARAMETER SYMBOL VSSAF3L45 UNIT VSSAF3L45-M3/6B 6B 14 000 13" diameter plastic tape and Instantaneous forward voltage VF (1) V reel • Low power losses, high0.032 efficiency 0.31 IF = 2.5 A 115 RV (1) VRRM 45 125 °C TA =JA °C/W Typical thermal resistance • Low forward voltage drop (1) I = 5.0 A 0.39 0.47 R 12 (1) F JM RATINGS AND CHARACTERISTICS CURVES 3.0 A IF • Meets MSL level 1, per J-STD-020, LF maximum peak of TA = 25 °C 650 μA Note (T °C unless otherwise noted) A = 25 IR (2) Reverse current VR = 45 V 260 °C 80 PCB, 1 IFSM (1) Free air, www.vishay.com =A125 °C 45 T thermal mounted on recommended oz. pad area; resistance R - junction to 8ambient, R - junction to mount mA Vishay General Semiconductor VSSAF5L45 A • Material categorization: For definitions of compliance 3.6 Typical TJ,junction TSTGseecapacitance - 40 to +o 150 4.0 V,o 1 MHz °C please www.vishay.com/doc?99912 T =130 C, Rth =12 C/W JA CJ JM Vishay General Semiconductor 1.6 740 - pF D = 0.8 D = 0.5 ORDERING INFORMATION (Example) 1.4 Notes D = 0.3 (TA = 25 °C unless otherwise noted) (1) ELECTRICAL D = 0.2 2.8 300 Pulse test: μs CHARACTERISTICS pulse width,WEIGHT 1 % duty MECHANICAL DATA PREFERRED P/N UNIT (g)cyclePREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE 1.2 (2) Pulse test: Pulse width 40 ms D = UNIT 1.0 PARAMETER TEST CONDITIONS SYMBOL TYP. MAX. 2.4DO-221AC (SlimSMA) Case: D = 0.1 VSSAF3L45-M3/6A 0.032 6A 3500 7" diameter plastic tape and reel Revision: 12-Oct-12 VRRM Document Number: 1.0 89934 1 45 V = 2.5 A 0.42 Molding rating 2 compound meets UL 94 V-0IFflammability VSSAF3L45-M3/6B 0.032 13" diameter plastic tape and reel 25 °C otherwise specified) TA =6B 100 [email protected], For technicalIFSM questions within your region: [email protected], THERMAL CHARACTERISTICS [email protected] 25 0.8 14 000 Base P/N-M3 - halogen-free, RoHS-compliant, and A °C unless 0.47 0.56 IF(T=A5.0 1.6 Instantaneous forward VF (1) V 0.39 V WITHOUT NOTICE. VF at IF = 5.0 commercial gradevoltageDESCRIBED HEREIN AND THIS DOCUMENT IS ASUBJECT TO CHANGE THE PRODUCTS THIS DOCUMENT PARAMETER SYMBOL VSSAF5L45 UNIT 0.6 0.31 A IF = 2.5 T RATINGS AND CHARACTERISTICS CURVES 1.2 FORTH AT www.vishay.com/doc?91000 DISCLAIMERS, SET TJ max. ARE SUBJECT TO SPECIFIC 150 °C °C TA = 125 Terminals: Matte tin plated leads, solderable per (1) 115 RJA I = 5.0 A 0.39 0.47 F 0.4 (TTypical 25 °C noted) °C/W thermal resistance 0.8 unless A =J-STD-002 andotherwise JESD22-B102 (2) TAR=JM 25 °C -12 650D = tp/T μA tp TM measured cathode M3 suffix meets JESD at 201 classband 1A whisker TYPICAL APPLICATIONS 0.4 IR (2) 0.2 Reverse current VR = 45 Vtest 3.6 1.6 terminal PCB mount Notes 8 45 mA TA = 125 °C Polarity: band denotes cathode end D = 0.8 For use in low voltage, high frequency inverters, (1) Free 0 Coloron D = 0.5 TM=130oPCB, C, RthJ-M =12opad C/Warea; thermal resistance RJA 0.0 air,3.2mounted recommended 1 oz. -1.4junction to ambient junction capacitance 4.0 V, 150 1 MHz175 CJ 0 25 50 75 100 125 freewheeling, DC/DC converters, and polarity protection (2) Typical = 0.3 2 - 2.4 2.8 3.2 pF 0 0.4 740 0.8 1.2 D 1.6 3.6 Mounted on 10 mm x 10 mm pad areas, 2 oz. FR4 PCB; RJM - junction to mount D = 0.2 2.8 applications. Notes 1.2 Average Forward Current (A) D = 1.0 Mount Temperature (°C) (1) Pulse test: 2.4 300 μs pulse width, 1 % duty cycle D = 0.1 Fig. 2 - Forward Power Loss Characteristics INFORMATION (Example) 1.0 (2) ORDERING 1 Pulse - Maximum PulseFig. test: width Forward 40 ms Currernt Derating Curve 3.2 M J-M 2 MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PREFERRED P/N UNIT WEIGHT (g) 1.6 SYMBOL CHARACTERISTICS VSSAF5L45 THERMAL VSSAF5L45-M3/6A 0.032 PARAMETER 1.2 PREFERRED PACKAGE CODE Peak forward surge current 10 ms single half sine-wave superimposed on rated load PRODUCT SHEET Operating junction and storage temperature range 25 50 75 100 BASE QUANTITY 0.8 (TA = 25 °C UNIT unless 6A otherwise specified) 3500 0.6 Device marking code 5L45 PARAMETER SYMBOL VSSAF5L45-M3/6B 0.032 6B Revision: 13-Apr-12 Document Number: 89935 0.8 1 (1) RV Maximum repetitive peak reverse voltage VRRM 45 JA For technical questions within your region: [email protected], [email protected], [email protected] TM measured at cathode band Typical thermal resistance 0.4 (1) RJM (2) terminal PCB mount 5.0 AND THIS DOCUMENT IF THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN Maximum DC forward current 0 AT www.vishay.com/doc?91000 CHARACTERISTICS CURVES A ARE SUBJECT TO SPECIFIC DISCLAIMERS,RATINGS SET FORTH 3.0 IF (2) AND Notes 0 Average Power Loss (W) Average Power Loss (W) DC Forward Rectified Current (A) DC Forward Rectified Current (A) Revision 12-Oct-12 Note PRIMARY CHARACTERISTICS (1) Free air, mounted on recommended copper pad area IF(AV) 5.0 A 125 150 DELIVERY MODE 7" diameter plastic tape and reel T 14VSSAF5L45 000 13" diameter plastic tapeUNIT and reel 0.4 115 0.2 D = tp/T 12 tp °C/W 0.0 175 0 0.4 0.8 1.2 (1) Free (T °Cmounted unless otherwise noted)PCB, 1 oz. pad area; thermal resistance RJA - junction to ambient on recommended A = 25air, I13-Apr-12 100 A - junction to mount (2) FSMon 10 mm x 10 Mount Temperature (°C)FR4 PCB; RJM Mounted mm pad areas, 2 oz. Revision: 2 1.6 2 2.4 2.8 3.2 3.6 Average Forward Document Current (A)Number: 89935 2/2 VMN-PT0354-1411 THIS T = 125 °C VSSAF5L45-M3/6B SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 3 A 2 0.032 6B ge Power Loss (W) Forward Current (A) Fig. 2 - Forward Power Loss Characteristics technical questions [email protected], [email protected], [email protected] Fig. 16 - Maximum Forward Derating Curve °C 2.8 -within 40 Currernt to your + 150region: TFor J, TSTG THIS DOCUMENT IS SUBJECT TO(Example) CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ORDERING INFORMATION D = 0.5 TM = 125 °C D = 0.8 ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT 2.4 www.vishay.com/doc?91000 Notes D = 0.3 5 PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY D = 0.2 DELIVERY MODE (1) Mounted on 10 mm x 10 mm pad areas, 2 oz. FR4 PCB 2 (2) Free air, mounted on recommended copper pad area DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED ARE SUBJECT = 0.1 7" diameter plastic VSSAF5L45-M3/6A 0.032 6A HEREIN AND THIS 3500 D DOCUMENT tape and reel 4 D = 1.0 1.6 1.2 14 000 13" diameter plastic tape and reel T TO