Taping of Diodes www.vishay.com Vishay Semiconductors Taping of Diodes AXIAL LEAD COMPONENTS Diodes and rectifiers with axial leads are normally delivered in taped form according to IEC 286-1 (see figure 1). The cathode side is designated by a colored tape. Taped devices are normally delivered in ammo boxes (ammo pack). Delivery on reels is available on request. Quantities per box dimensions 264 (L) x 146 (H) x 73 (W). AVAILABLE PACKAGING PACKAGE 10" TAPE AND REEL 14" TAPE AND REEL AMMO PACK #1 QUANTITY/REEL QUANTITY/REEL QUANTITY/BOX SOD-57 5000 5000 SOD-64 2500 2500 DO-35 10 000 DO-41 5000 5000 -TR -TAP Suffix to ordering code -TR 10 000 TAPING SPECIFICATIONS DO-35, DO-41, SOD-57, AND SOD-64 PACKAGE SYMBOL SPECIFICATION (mm) Component pitch DESCRIPTION A 5.0 ± 0.5 Devices with diameter d < 4.5 Component pitch A’ 10 ± 0.5 Devices with diameter d’ > 4.5 Inside tape spacing B 52 + 2/- 1 Lead to lead eccentricity ID1-D2I 1.4 max. Lead extension K 0.8 max. Lead bending M 1.2 max. Cumulative pitch P 2.0 per 10 pitch Exposed adhesive S 0.8 max. Tape width T 6.0 ± 0.4 Tape leader Beginning and end of reel or ammo pack 300 min. Consecutive missing components not allowed < 0.1 % Empty spaces All polarized components shall be oriented in the same direction. The cathode tape shall be colored, and anode tape shall be white or light beige. Polarity marking Note • Allowable deviation above 10 taped steps ± 2 mm 0.8 (0.031) max. |D1 - D2| = 1.4 (0.055) max. D1 D2 K S A 0.8 (0.031) max. M P B 6.0 ± 0 . 4 (0.236 ± 0.0157) T W Dimensions A, M, K, P, S and T apply to both sides 15802 Fig. 1 Rev. 1.3, 27-Feb-14 Document Number: 84082 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Taping of Diodes www.vishay.com Vishay Semiconductors AMMO PACK #1 SPECIFICATION (DO-35, DO-41, SOD-57, AND SOD-64 PACKAGES) DESCRIPTION SPECIFICATION SYMBOL INCHES MILLIMETERS Length A 10.25 ± 0.2 260 ± 5.0 Width B 2.75 ± 0.2 70 ± 5.0 Height C 5.75 ± 0.65 146 ± 16 D3 W2 D2 D1 D0 Note • Material: corrugated board (neutral) 19016 W1 Fig. 4 A TAPE AND REEL SURFACE-MOUNTED DEVICES (SMDs) SMDs are normally delivered taped on blister tape and reeled according to IEC 286-3. The mounting side of the component is oriented to the bottom side of the tape. For components with two terminations, the cathode side is oriented to the sprocket hole. For components in SOT-23 package, the side from which one single termination emerges is oriented to the sprocket hole. Components can be delivered either on 180 mm or on 330 mm reels. For quantities per reel, see below. C Inspection hole (both sides) B 15800 Fig. 2 REEL SPECIFICATION DESCRIPTION SYMBOL REEL SIZE 10" REEL SIZE 14" SOD-57 SOD-64 DO-35 DO-41 Arbor hole diameter D0 30 ± 1 mm 30 ± 1 mm Core diameter D1 71 ± 1 mm 80 ± 1 mm Reel diameter D2 250 ± 2 mm 355 mm Drive hole diameter D3 10 ± 1 mm 8 ± 0.5 mm Reel width W1 68 ± 1 mm 73 mm Drive/arbor hole spacing W2 27.5 ± 1 mm 26 ± 0.5 mm Core material Plastic Carton Reel material Plastic Carton CASE TYPE DO-214AC (SMA) MicroMELF SUFFIX QUANTITY -TR 1500 180 12 6000 330 12 -TR 2500 180 8 -TR3 10 000 330 8 2500 180 8 2500 330 8 2500 180 8 2500 330 8 3000 180 8 10 000 330 8 3000 180 8 10 000 330 8 3000 180 8 10 000 330 8 -08 -GS18 -18 -GS08 QuadroMELF SOD-80 -08 -GS18 -18 W1 -GS08 DO-219AB (SMF) D0 D3 D2 -08 -GS18 -18 -GS08 D1 SOD-123 W2 -08 -GS18 -18 -GS08 15801 SOD-323 Fig. 3 TAPE WIDTH IN mm -TR3 -GS08 MiniMELF SOD-80 REEL SIZE IN mm (DIAMETER) -08 -GS18 -18 Rev. 1.3, 27-Feb-14 Document Number: 84082 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Taping of Diodes www.vishay.com CASE TYPE SOD-523 TAPE WIDTH IN mm -08 3000 180 8 -18 10 000 330 8 3000 180 8 10 000 330 8 3000 180 8 10 000 330 8 -08 -GS18 -18 -GS08 SOT-323 REEL SIZE IN mm (DIAMETER) SUFFIX QUANTITY -GS08 SOT-23 Vishay Semiconductors -08 -GS18 -18 T2 De-reeling direction 5.75 5.25 3.7 max. W F 1.85 1.65 1.6 1.4 4.1 3.9 95 9662 2.05 1.95 technical drawings according to DIN specifications 0.3 max. 4.1 3.9 Fig. 5 DIMENSIONS (mm) PACKAGES MiniMELF SOD-80, QuadroMELF SOD-80, MicroMELF, SOD-123, SOD-323, SOD-523, SOT-23, SOT-323 W F T2 B 8 ± 0.3 3.5 ± 0.05 2.5 max. 8.4 to 10.4 B 120 ° GS08/08: A = 180 ± 2 mm GS18/18: A = 330 ± 2 mm 4.5 3.5 2.5 1.5 12.9 12.6 63.5 60.5 Identification label: Vishay type group tape code production code quantity 2.0 1.4 A 94 9155 Fig. 6 Rev. 1.3, 27-Feb-14 Document Number: 84082 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Taping of Diodes www.vishay.com Vishay Semiconductors MISSING DEVICES LABELING A maximum of 0.5 % of the total number of components per reel may be missing - exclusively at the beginning and at the end of the reel. A maximum of three consecutive components may be missing, provided this gap is followed by six consecutive components (see figure 7). De-reeling direction 94 8158 > 160 mm Tape leader 40 empty compartments min. 75 empty compartments Carrier leader Carrier trailer 20234 Fig. 1 - Labeling of Taping Reel Fig. 7 20233 Fig. 2 - Labeling of Carton Box Rev. 1.3, 27-Feb-14 Document Number: 84082 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000