SMD Tape and Reel

SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
Tape and Reel Standards for SMD IR Receiver Modules
Vishay Semiconductor SMD IR receivers are packaged
on tape and reel. The following specification is based on
IEC publication 286, which takes the industrial requirements
for automatic insertion into account.
NUMBER OF COMPONENTS
A. Panhead SMD: quantity per reel:
TT, SMD top view package, 1190 pcs
TR, SMD side view package, 1120 pcs
Absolute maximum ratings, mechanical dimensions, optical
and electrical characteristics for taped devices are identical
to the basic catalog types and can be found in the
specifications for untaped devices.
B. Heimdall: quantity per reel:
TT, Heimdall top view package, 2200 pcs
TR, Heimdall side view package, 2300 pcs
C. Heimdall without lens: quantity per reel:
PACKAGING
WTT, top view package, 2200 pcs
The tapes of components are available on reels. Each reel is
marked with labels which contain the following information:
WTR, side view package, 2300 pcs
D. Belobog: quantity per reel:
- Vishay
- Type
TT1, 1800 pcs
- Group
TT2, 7000 pcs
- Tape code, normally part of type name
TR, not available in side view
- Production code
E. Belobog with shield: quantity per reel:
- Quantity
TT1, 1500 pcs
TT2, 5000 pcs
MISSING COMPONENTS
Up to 3 consecutive components may be missing if the gap
is followed by at least 6 components. A maximum of 0.5 %
of the components per reel quantity may be missing. At least
5 empty positions are present at the start and the end of the
tape to enable tape insertion.
ORDER DESIGNATION
The type designation of the device is extended by
TT or TT1 for top view or TR for side view.
Example:
TSOP6238TR (reel packing)
Tensile strength of the tape: > 15 N
TSOP75238TR (reel packing)
TSOP75338WTT (reel packing)
TSOP57438TT1 (reel packing)
TSOP57238HTT1 (reel packing)
Rev. 2.1, 13-Oct-15
1
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
REEL DIMENSIONS FOR PANHEAD SMD AND HEIMDALL in millimeters
16734
Note
• The body structure of the reel can vary
Rev. 2.1, 13-Oct-15
2
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TT (TOP VIEW) DIMENSIONS in millimeters
A. Panhead SMD (TSOP36...TT, TSSP....TT, TSOP6...TT)
16584
Rev. 2.1, 13-Oct-15
3
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TT (TOP VIEW) DIMENSIONS in millimeters
3.65
0.3
B. Heimdall SMD (TSOP75...TT, TSOP77...TT, TSSP77...TT)
16
1.75
7.5
Ø 1.5
4
8
Direction of feed
2
Ø 1.5
technical drawings
according to DIN
specifications
Drawing-No.: 9.700-5338.01-4
Issue: 4; 12.06.13
Rev. 2.1, 13-Oct-15
4
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TT (TOP VIEW) DIMENSIONS in millimeters
3
0.3
C. Heimdall SMD without lens (TSOP75...WTT, TSOP77...WTT, TSSP77...WTT)
16
1.75
7.5
Ø 1.5
4
Direction of feed
8
2
Ø 1.5 min.
technical drawings
according to DIN
specifications
Drawing-No.: 9.700-5341.01-4
Issue: 3; 06.10.15
Rev. 2.1, 13-Oct-15
5
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TT1, TSOP..TT2 (TOP VIEW) DIMENSIONS in millimeters
D. Belobog (TSOP37...TT1, TSOP37...TT2, TSOP57...TT1, TSOP57...TT2)
Tape and reel dimensions:
Unreel direction
TT1 Ø 180 ± 2 = 1800 pcs.
TT2 Ø 330 ± 2 = 7000 pcs.
Tape position
coming out from reel
2±
Ø 60 min.
Reel size "Y"
ØY
0.5
Ø 21 ± 0.8
Ø 13 ± 0.2
Label posted here
(12.4)
18.4 max.
Empty leader 400 mm min.
Parts mounted
100 mm min. with cover tape
Leader and trailer tape:
Empty trailer 200 mm min.
Direction of pulling out
Technical drawings
according to DIN
specifications
(Ø 1.5)
(2)
(5.5)
(0.3)
(4)
Drawing-No.: 9.700-5347.01-4
Issue: 1; 14.11.11
Rev. 2.1, 13-Oct-15
12 ± 0.3
(8)
(1.2)
(1.75)
X 2:1
Not indicated tolerances ± 0.1
6
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TT1, TSOP..TT2 (TOP VIEW) DIMENSIONS in millimeters
E. Belobog with shield (TSOP37...HTT1, TSOP37...HTT2, TSOP57...HTT1, TSOP57...HTT2)
Tape and Reel dimensions:
Reel size "Y"
X
Unreel direction
2±
Ø 60 min.
GS 08 Ø 180 ± 2 = 1500 pcs.
GS 18 Ø 330 ± 2 = 5000 pcs.
Tape position
coming out from reel
ØY
0.5
Not indicated tolerances ± 0.1
Ø 21 ± 0.8
Ø 13 ± 0.2
Label posted here
(12.4)
18.4 max.
Parts mounted
Empty leader 400 mm min.
100 mm min. with cover tape
Leader and trailer tape:
Empty trailer 200 mm min.
Direction of pulling out
Technical drawings
according to DIN
specifications
(Ø 1.5)
(2)
(5.5)
(0.3)
(4)
Drawing-No.: 9.700-5380.01-4
Issue: 1; 28.10.13
Reel dimensions and tape
Rev. 2.1, 13-Oct-15
(12)
(8)
(1.75)
X 2:1
7
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters
A. Panhead SMD (TSOP36...TR, TSSP6...TR, TSOP6...TR)
16585
Rev. 2.1, 13-Oct-15
8
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters
0.3
3.6
B. Heimdall SMD (TSOP75..., TSOP77..., TSSP7....)
16
7.5
1.75
1.34 ref.
Ø 1.5
4
Direction of feed
8
2
Ø 1.5 min.
technical drawings
according to DIN
specifications
Drawing-No.: 9.700-5337.01-4
Issue: 2; 06.10.15
Rev. 2.1, 13-Oct-15
9
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
TAPING VERSION TSOP..TR (SIDE VIEW) DIMENSIONS in millimeters
3.6
0.3
C. Heimdall SMD without lens (TSOP75...WTR, TSOP77...WTR, TSSP...WTR)
16
1.75
7.5
Ø 1.5
4
Direction of feed
8
2
Ø 1.5
technical drawings
according to DIN
specifications
Drawing-No.: 9.700-5342.01-4
Issue: 2; 12.06.13
Rev. 2.1, 13-Oct-15
10
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
LEADER AND TRAILER DIMENSIONS in millimeters
Trailer
no devices
Leader
devices
no devices
End
Start
min. 200
min. 400
96 11818
COVER TAPE REEL STRENGTH
LABEL
According to DIN EN 60286-3
Standard bar code labels for finished goods
0.1 N to 1.3 N
The standard bar code labels are product labels and used
for identification of goods. The finished goods are packed in
final packing area. The standard packing units are labeled
with standard bar code labels before transported as finished
goods to warehouses. The labels are on each packing unit
and contain Vishay Semiconductor GmbH specific data.
300 mm/min. ± 10 mm/min.
165° to 180° peel angle
VISHAY SEMICONDUCTOR GmbH STANDARD BAR CODE PRODUCT LABEL (finished goods)
PLAIN WRITING
ABBREVIATION
LENGTH
Item-description
-
18
INO
8
Item-number
Selection-code
SEL
3
BATCH
10
Data-code
COD
3 (YWW)
Plant-code
PTC
2
Quantity
QTY
8
Accepted by
ACC
-
Packed by
PCK
-
MIXED CODE
-
xxxxxxx+
Company logo
TYPE
LENGTH
LOT-/serial-number
Mixed code indicator
Origin
LONG BAR CODE TOP
Item-number
N
8
Plant-code
N
2
Sequence-number
X
3
Quantity
N
8
Total length
-
21
TYPE
LENGTH
Selection-code
X
3
Data-code
N
3
Batch-number
X
10
Filter
-
1
Total length
-
17
SHORT BAR CODE TOP
Rev. 2.1, 13-Oct-15
11
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD Tape and Reel
www.vishay.com
Vishay Semiconductors
DRY PACKAGING
The reel is packed in an anti-humidity bag to protect the
devices from absorbing moisture during transportation and
storage.
LEVEL
CAUTION
This bag contains
MOISTURE-SENSITIVE DEVICES
Aluminum bag
4
1. Shelf life in sealed bag: 12 months at < 40 °C and < 90 % relative
humidity (RH)
2. After this bag is opened, devices that will be subjected to soldering
reflow or equivalent processing (peak package body temp. 260 °C)
must be
2a. Mounted within 72 hours at factory condition of < 30 °C/60 % RH or
2b. Stored at < 5 % RH
Label
3. Devices require baking befor mounting if:
Humidity Indicator Card is > 10 % when read at 23 °C ± 5 °C or
2a. or 2b. are not met.
4. If baking is required, devices may be baked for:
192 hours at 40 °C + 5 °C/- 0 °C and < 5 % RH (dry air/nitrogen) or
96 hours at 60 °C ± 5 °C and < 5 % RH for all device containers or
24 hours at 125 °C ± 5 °C not suitable for reels or tubes
Reel
Bag Seal Date:
(If blank, see barcode label)
15973
Note: Level and body temperature defined by EIA JEDEC Standard J-STD-020
22522
RECOMMENDED METHOD OF STORAGE
EIA JEDEC standard JSTD-020 level 4 label is included
on all dry bags
Dry box storage is recommended as soon as the aluminum
bag has been opened to prevent moisture absorption. The
following conditions should be observed, if dry boxes are
not available:
ESD PRECAUTION
Proper storage and handling procedures should be followed
to prevent ESD damage to the devices especially when they
are removed from the antistatic shielding bag. Electrostatic
sensitive devices warning labels are on the packaging.
• Storage temperature 10 °C to 30 °C
• Storage humidity  60 % RH max.
After more than 72 h under these conditions moisture
content will be too high for reflow soldering.
VISHAY SEMICONDUCTORS STANDARD
BAR CODE LABELS
In case of moisture absorption, the devices will recover to
the former condition by drying under the following condition:
The Vishay Semiconductors standard bar code labels are
printed at final packing areas. The labels are on each
packing unit and contain Vishay Semiconductors specific
data.
192 h at 40 °C + 5 °C / - 0 °C and < 5 % RH (dry air /
nitrogen) or
96 h at 60 °C + 5 °C and < 5 % RH for all device containers 
or
24 h at 125 °C + 5 °C not suitable for reel or tubes.
An EIA JEDEC® standard JSTD-020 level 4 label is included
on all dry bags.
16962
OUTER PACKAGING
The sealed reel is packed into a pizza box.
CARTON BOX DIMENSIONS in millimeters
Length
Thickness
Width
22127
Pizza Box
(SMD and Heimdall)
(Taping in reels)
Rev. 2.1, 13-Oct-15
THICKNESS
WIDTH
LENGTH
50
340
340
12
Document Number: 80125
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000