High-reliability discrete products and engineering services since 1977 1N5624-1N5627 GLASS PASSIVATED RECTIFIERS FEATURES Available as “HR” (high reliability) screened per MIL-PRF-19500, JANTX level. Add “HR” suffix to base part number. Available as non-RoHS (Sn/Pb plating), standard, and as RoHS by adding “-PBF” suffix. MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified) Symbol 1N5624 1N5625 1N5626 1N5627 Unit Maximum peak repetitive reverse voltage Characteristics VRRM 200 400 600 800 V Maximum RMS voltage VRMS 140 280 420 560 V Maximum DC blocking voltage VDC 200 400 600 800 V Maximum average forward rectified current 0.375” lead length @ TA = 70°C IAV Peak forward surge current 8.3ms single half sine wave superimposed on rated load IFSM Maximum instantaneous forward voltage @ 3.0A TA = 25°C TA = 70°C VF 1.0 0.95 V IR 5.0 µA 3.0 A A 125 Maximum DC reverse current at rated DC blocking voltage TA = 25°C TA = 175°C Maximum full load reverse current Full cycle average, 0.375” lead length @ TA = 70°C Typical junction capacitance (1) Typical thermal resistance (2) Operating junction temperature range Storage temperature range IR(AV) 300 200 150 100 µA CJ 40 pF RӨJA RӨJL 20 10 °C/W TJ -65 to +175 °C TSTG -65 to +200 °C Note 1: Measured at 1.0 MHz and applied reverse voltage of 4.0 V. Note 2: Thermal resistance from junction to ambient and from junction to lead at 0.375” lead length, with both leads attached between heatsinks. Rev. 20121121 High-reliability discrete products and engineering services since 1977 1N5624-1N5627 GLASS PASSIVATED RECTIFIERS MECHANICAL CHARACTERISTICS Case: Digi K Marking: Body painted, alpha-numeric Polarity: Cathode band Rev. 20121121 High-reliability discrete products and engineering services since 1977 1N5624-1N5627 GLASS PASSIVATED RECTIFIERS Rev. 20121121