L3F1-SL thru L3F7-SL

L3F1-SL thru L3F7-SL
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 3A
Features
•
•
•
•
•
•
•
Ideal for automated placement
Low forward voltage drop
Low leakage current
Solder dip 260 °C, 10 s
Glass passivated fast recovery rectifiers
Low profile, typical thickness 1.0mm
Moisture sensitivity: level 1, per J-STD-020
eSGB (SMAF)
Typical Applications
For use of general purpose rectification in lighting, cellular phone, portable device,
power supplies, and other consumer applications.
Maximum Ratings
(TA = 25 °C unless otherwise noted)
Parameter
Symbol
L3F1- L3F2- L3F3- L3F4- L3F5- L3F6- L3F7Unit
SL
SL
SL
SL
SL
SL
SL
Maximum repetitive peak reverse voltage
Maximum RMS voltage
Maximum DC blocking voltage
Maximum average forward rectified current
VRRM
VRMS
VDC
IF(AV)
Peak forward surge current 8.3 ms single half
sine-wave superimposed on rated load
IFSM
90
A
TJ, TSTG
- 55 to + 150
°C
Operating junction and storage temperature
range
Electrical Characteristics
Test Conditions Symbol
Maximum instantaneous
forward voltage
IF=3 A,TA=25℃
IF=0.5A,IR=1.0A,
Maximum reverse recovery
time
Irr=0.25A
Typical junction capacitance
4.0 V, 1 MHz
Typical thermal resistance
1)
juntion to mount
100
70
100
200
140
200
400
280
400
30
3.0
600
420
600
800
560
800
1000
700
1000
V
V
V
A
(TA = 25 °C unless otherwise noted)
Parameter
TA=25℃
Maximum DC reverse current
at rated DC blocking voltage TA=125℃
50
35
50
L3F1- L3F2- L3F3- L3F4- L3F5- L3F6- L3F7Unit
SL
SL
SL
SL
SL
SL
SL
VF
1.3
V
5
IR
µA
100
trr
150
250
nS
CJ
20
pF
RθJM
20
℃/W
Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 8×8mm copper pads,2 OZ,FR4 PCB
www.goodark.com
1/4
2015.09-Rev.A
L3F1-SL thru L3F7-SL
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 3A
Ratings and Characteristics Curves
(TA = 25℃ unless otherwise noted)
Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current
Figure 1.Forward Current Derating Curve
Figure 4. Typical Instantaneous Forward Characteristics Figure 3. Typical Reverse Characteristics Figure 5. Typical Junction Capacitance
www.goodark.com
2/4
2015.09-Rev.A
L3F1-SL thru L3F7-SL
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 3A
Package Outline Dimensions
Soldering footprint
Packing Information
Packing quantities:
Reel size
7"
13"
13
Quantity/reel
3K
10K
Quantity/inner Box
21K
20K
Quantity/Carton
84K
180K
Tape & Reel Specification
www.goodark.com
3/4
2015.09-Rev.A
L3F1-SL thru L3F7-SL
Surface Mount Glass Passivated Fast Recovery Rectifier
Reverse Voltage 50~1000V Forward Current 3A
Disclaimers
These materials are intended as a reference to assist our customers in the selection of the
Suzhou Good-Ark product best suited to the customer’s application; they do not convey any
license under any intellectual property rights,
rights or any other rights,
rights belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party.
Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or
infringement of any third-party’s rights, originating in the use of any product data, diagrams,
charts, programs, algorithms, or circuit application examples contained in these materials.
All information contained in these materials, including product data, diagrams, charts,
programs and algorithms represents information on products at the time of publication of
these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without
notice due to product improvements or other reasons. It is therefore recommended that
customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark
Electronics Co., Ltd. for the latest product information before purchasing a product listed
herein The information described here may contain technical inaccuracies or typographical
herein.
errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage,
liability, or other loss rising from these inaccuracies or errors. Please also pay attention to
information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including
our website home page.
(http://www.goodark.com)
When using any or all of the information contained in these materials, including product data,
diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a
total system before making a final decision on the applicability of the information and
products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage,
liability or other loss resulting from the information contained herein.
The prior
Th
i written
itt approvall off Suzhou
S h Good-Ark
G d A k Electronics
El t i Co.,
C Ltd.
Ltd is
i necessary to
t reprint
i t or
reproduce in whole or in part these materials.
Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further
details on these materials or the products contained herein.
www.goodark.com
4/4
2015.09-Rev.A