SGC0503U thru SGC0506U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 5A Features • • • • • • • Glass passivated Superfast Recovery rectifiers Ideal for automated placement Low forward voltage drop Low leakage current Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified Low profile - typical height of 1.1 mm Anode Cathode & Heatsink Anode 2 Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol SGC0503U SGC0504U SGC0505U SGC0506U Unit Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage VRRM VRMS VDC IF(AV)1) IF(AV)2) 200 140 200 400 280 400 600 420 600 800 560 800 V V V Maximum average forward rectified current Peakk forward P f d surge currentt 8.3 8 3 ms single i l half sine-wave superimposed on rated load 5.0 A 3.0 150 A - 55 to + 150 °C IFSM Operating junction and storage temperature TJ, TSTG range Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Test Conditions Maximum instantaneous 5A forward voltage TA=25℃ Maximum DC reverse current at rated DC TA=125℃ blocking voltage Maximum reverse recovery time Typical junction capacitance Typical thermal resistance IF=0.5A,I 0 5A IR=1.0A, 1 0A Irr=0.25A 4.0 V, 1 MHz Symbol VF SGC0503U SGC0504U 0.95 1.3 SGC0505U SGC0506U 1.7 Unit Volts 10 IR µA 500 trr 35 nS CJ 22 pF juntion to mount RθJM 1) 15 juntion to ambient RθJA 2) 40 ℃/W Notes: 1)Thermal resistance RθJM is junction to mount. Free air,mounted on aluminum P.C.B with recommended copper pad 2)Thermal resistance RθJA is junction to ambient.Mounted on P.C.B with 30*30mm copper pad area www.goodark.com 1/4 2014.06-Rev.A SGC0503U thru SGC0506U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 5A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 1. Typical Instantaneous Forward Characteristics Figure 2.Maximum Non‐Repetitive Peak Forward Surge Current Figure 3. Typical Instantaneous Reverse Characteristics Characteristics Figure 4. Typical Junction Capacitance Figure 5.Forward Current Derating Curve www.goodark.com 2/4 2014.06-Rev.A SGC0503U thru SGC0506U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 5A Package Outline Dimensions DIM HE E D B1 B2 A C L L1 L2 L3 D1 E1 Unit: mm MIN MAX 6.4 6.6 5.6 5.8 4.1 4.3 1.7 1.9 0.8 1 1.05 1.2 0.3 0.4 0.85 1.1 4.2 4.4 3.52 Typ. 1.1 1.4 3 3.3 1.86 Typ. Unit: inch MIN 0.252 0.220 0.161 0.067 0.031 0.041 0.012 0.033 0.165 0.139 0.043 0.118 0.073 MAX 0.260 0.228 0.169 0.075 0.039 0.047 0.016 0.043 0.173 Typ. 0.055 0.130 Typ. Soldering footprint Packing Information Packing quantities: p p 13" Reel 5000 pcs/Reel，12mm Tape, Tape & Reel Specification www.goodark.com 3/4 2014.06-Rev.A SGC0503U thru SGC0506U Surface Mount Glass Passivated superfast recovery Rectifier Reverse Voltage 200~800V Forward Current 5A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. errors Suzhou Good-Ark Electronics Co., Co Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using g anyy or all of the information contained in these materials, including g product p data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2014.06-Rev.A