SGP1A thru SGP7A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Features • • • • • • • Low forward voltage drop Low leakage current Glass p passivated Standard Rectifiers Low profile - typical height of 1.0 mm Moisture sensitivity: level 1, per J-STD-020 High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGP(SOD‐323F) SGP(SOD 323F) Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol SGP1A SGP2A SGP3A SGP4A SGP5A SGP6A SGP7A Unit Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC blocking voltage Maximum average forward rectified current at TL(See Fig.1) IF(AV) 1.0 A Peak forward surge current 8.3 ms single halflf sine-wave superimposed h i i d on rated t d load IFSM 25 A Operating junction and storage temperature range TJ, TSTG - 55 to + 150 °C Electrical Characteristics (TA = 25 °C unless otherwise noted) Parameter Maximum instantaneous forward voltage Maximum DC reverse current Typical T i l reverse recovery time Typical junction capacitance Typical thermal resistance1) Test Conditions Symbol 1A TA=25℃ TA=125℃ IF=0.5A,I =0 5A IR=1.0A, =1 0A Irr=0.25A 4.0 V, 1 MHz juntion to mount SGP1A SGP2A SGP3A SGP4A SGP5A SGP6A SGP7A Unit 1.1 Volts VF 5 IR 50 µA trr 1.8 uS CJ 5 pF RθJM 55 ℃/W Note:1),The thermal resistance from junction to mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/4 2015.01-Rev.A SGP1A thru SGP7A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) www.goodark.com 2/4 2015.01-Rev.A SGP1A thru SGP7A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Package Outline Dimensions Package eSGP A B C D E L HE Unit:mm MIN 0.9 0.5 0.1 1.4 2.0 0.35 2.4 MAX 1.08 0.7 0.25 1.6 2.2 0.65 2.8 Unit:inch MIN 0.035 0.020 0.004 0.055 0.079 0.014 0.094 MAX 0.043 0.028 0.010 0.063 0.087 0.026 0.110 Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2015.01-Rev.A SGP1A thru SGP7A Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 50~1000V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer’s application; they do not convey any license under any intellectual property rights rights, or any other rights, rights belonging to Suzhou Good-Ark Good Ark Electronics Co., Co Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. errors Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.01-Rev.A