F98 Series Resin-Molded Chip, High CV Undertab FEATURES • Compliant to the RoHS2 directive 2011/65/EU • SMD face down design • Small and low profile LEAD-FREE COMPATIBLE COMPONENT APPLICATIONS • • • • Smartphone Mobile phone Wireless module Hearing aid CASE DIMENSIONS: millimeters (inches) Code EIA Code EIA Metric M 0603 L 1608-09 1.60 (0.063 W1 +0.20 -0.10 +0.008 -0.004 +0.20 -0.10 +0.008 -0.004 W2 H S1 W2 ) 0.65±0.10 (0.026±0.004) 0.80±0.10*3 (0.031±0.004) 0.50±0.10 (0.020±0.004) 0.60±0.10 (0.024±0.004) ) 0.90±0.10 (0.035±0.004) 0.80±0.10 (0.031±0.004) 0.50±0.10 (0.020±0.004) 1.00±0.10 (0.039±0.004) 0.60±0.05 (0.024±0.002) 0.35±0.05 (0.014±0.002) 0.55±0.05 (0.022±0.002) 0.30±0.05 (0.012±0.002) 0.50±0.05 (0.020±0.002) ) 0.85 (0.033 +0.20 -0.10 +0.008 -0.004 ) 1.25 (0.049 +0.20 -0.10 +0.008 -0.004 S 0805 2012-09 2.00 (0.079 U 0402 1106-06 1.10±0.05 (0.043±0.002) *3 F980J107MMAAXE: 1.0mm Max. L MARKING W1 U CASE H M CASE S CASE *Capacitance Code J W2 S1 S2 S1 Rated Voltage Code HOW TO ORDER F98 0J Type Rated Voltage Js Rated Voltage Code 106 M M ⵧ ⵧⵧⵧ Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Tolerance M = ±20% Case Size See table above Packaging See Tape & Reel Packaging Section Specification Suffix LZT = Rated temperature 60ºC only AXE = Rated temperature 60ºC and H dimension 1.0mm Max TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: 051216 -55 to +125°C +85°C ±20% at 120Hz Refer to next page Refer to next page Refer to next page Provided that: After 5 minute’s application of rated voltage, leakage current at 85°C 10 times or less than 20ºC specified value. After 5 minute’s application of rated voltage, leakage current at 125°C 12.5 times or less than 20ºC specified value. 67 F98 Series Resin-Molded Chip, High CV Undertab CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance µF Code 1.0 105 2.2 225 4.7 475 10 106 22 226 33 336 47 476 68 686 100 107 220 227 2.5 (0e) 4V (0G) 6.3V (0J) U U M M M M/S M/S S M/U M/U** M M M/S M Rated Voltage 10V (1A) 16V (1C) M M/U M M/U** M M S M**/S M**/S S 20V (1D) M 25V (1E) M 35V (1V) S M*4/S Available Ratings *4 Rated temperature 60°C and H dimension 1.0mm Max only. Please contact AVX when you need detail spec. **Rated temperature 60ºC only. Please contact AVX when you need detail spec. *Cap Code – – – a J n s w A J We can consider the type of compliance to AEC-Q200. Please contact to your local AVX sales office when these series are being designed in your application. RATINGS & PART NUMBER REFERENCE AVX Part No. Case Capacitance Size (μF) F980E476MMA M 47 F980G475MUA F980G106MUA F980G226MMA F980G336MMA F980G476MMA F980G686MMA F980G686MSA F980G107MMA F980G107MSA F980G227MSA U U M M M M S M S S 4.7 10 22 33 47 68 68 100 100 220 F980J475MMA F980J475MUA F980J106MMA F980J106MUALZT F980J226MMA F980J336MMA F980J476MMA F980J476MSA F980J107MMAAXE F980J107MSA M U M U M M M S M S 4.7 4.7 10 10 22 33 47 47 100 100 F981A225MMA F981A225MUA F981A475MMA F981A475MUALZT F981A106MMA F981A226MMALZT F981A226MSA F981A336MMALZT F981A336MSA F981A476MSA M U M U M M S M S S 2.2 2.2 4.7 4.7 10 22 22 33 33 47 F981C105MMA F981C225MMA F981C475MMA F981C106MSA M M M S 1 2.2 4.7 10 F981D105MMA M 1 F981E105MMA M 1 F981V105MSA S 1 68 Rated Voltage (V) 2.5 Volt 2.5 4 Volt 4 4 4 4 4 4 4 4 4 4 6.3 Volt 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 Volt 10 10 10 10 10 10 10 10 10 10 16 Volt 16 16 16 16 20 Volt 20 25 Volt 25 35 Volt 35 *2 DCL (μA) DF ESR @ 120Hz @ 100kHz (%) (Ω) *1 ΔC/C (%) 1.2 30 4 ±30 0.5 0.8 0.9 1.3 1.9 27.2 2.7 80.0 4.0 132 20 25 15 30 40 50 30 60 35 80 20 20 7.5 4 8 10 4 10 4 5 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 0.5 0.6 0.6 6.3 1.4 4.2 29.6 3.0 126 63.0 20 20 8 30 20 35 45 25 80 50 7.5 20 6 30 6 8 10 6 10 8 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 0.5 0.5 0.5 4.7 1.0 11.0 2.2 33.0 3.3 9.4 6 15 6 25 20 30 20 45 30 35 7.5 15 6 25 7.5 8 4 8 6 5 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 ±30 0.5 0.5 0.8 1.6 6 6 12 18 10 10 12 4 ±30 ±30 ±30 ±30 0.5 6 10 ±30 0.5 8 10 ±30 0.7 20 8 ±30 *2: Leakage Current After 5 minute’s application of rated voltage, leakage current at 20ºC. 051216 F98 Series Resin-Molded Chip, High CV Undertab QUALIFICATION TABLE TEST Damp Heat (Steady State) Temperature Cycles Resistance to Soldering Heat Surge Endurance Shear Test Terminal Strength 051216 F98 series (Temperature range -55ºC to +125ºC) Condition At 40°C, 90 to 95% R.H., 500 hours (No voltage applied) Capacitance Change ........... Refer to page 68 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current .................. 200% or less of initial specified value -55°C / +125°C, 30 minutes each, 5 cycles Capacitance Change ........... Refer to page 68 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current .................. 200% or less of initial specified value 10 seconds reflow at 260°C, 5 seconds immersion at 260°C. Capacitance Change ........... Refer to page 68 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After application of surge in series with a 1kΩ resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85ºC, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 68 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current .................. 200% or less of initial specified value After 1000 hours’ application of rated voltage in series with a 3Ω resistor at 85°C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 68 (*1) Dissipation Factor ................ 150% or less of initial specified value Leakage Current .................. 200% or less of initial specified value After applying the pressure load of 5N for 10±1 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of substrate so that the substrate may bend by 1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. 69