Constant current dimmable LED Drivers For indoor use LNSB-12C Series, 12 Watt, Phase-Cut Dimmable FEATURES: Constant current output Active power factor correction, class Phase-cut dimmable Short circuit, over load and over temperature protections Designed to worldwide safety standards for lighting Cooling by free air convection 5 year warranty Model Ⅱ power Nominal Input voltage (Vac) Output current (mA) Output voltage (Vdc) Min. Max. Output power (W) LNSB12-C150E 150 33 95 12 LNSB12-C240E 240 33 65 12 350 18 41 LNSB12-C500E 500 13 30 12 LNSB12-C700E 700 10 20 12 LNSB12-C350E 220-240 12 ELECTRICAL Input Parameters Symbols Test Conditions / Comment Min. Typ. Max. Units Input voltage Vin --- 198 -- 264 Vac Input frequency Fline --- 47 -- 63 Hz Iin Full load, Vin = 230Vac -- -- 80 mA -- -- 15 A -- -- 8 A Input current Cold start, 100μs Inrush current Iinrush (Output current: 150~240mA) Cold start, 250μs (Output current: 350~700mA) Power factor Efficiency www.pairuigroup.com PF Full load -- 0.9 -- PF η Full voltage, full load -- 80 -- % Page: 1 / 5 Date: 07/18/2015 *Subject to change without prior notice. Constant current dimmable LED Drivers For indoor use LNSB-12C Series, 12 Watt, Phase-Cut Dimmable ELECTRICAL Output Parameters Output current Output voltage Turn-on time Ripple Symbols Iout Vout Tturn-on Iripple Test Conditions / Comment Min. Typ. Max. Units LNSB12-C150E 135 150 165 mA LNSB12-C240E 216 240 264 mA LNSB12-C350E 322 350 378 mA LNSB12-C500E 460 500 540 mA LNSB12-C700E 644 700 714 mA LNSB12-C150E 33 80 95 V LNSB12-C240E 33 50 65 V LNSB12-C350E 18 34 41 V LNSB12-C500E 13 24 30 V LNSB12-C700E 10 17 20 V Cold start, power on -- -- 0.5 S LNSB12-C150E -- 30 -- LNSB12-C240E -- 40 -- LNSB12-C350E -- 18 -- LNSB12-C500E -- 25 -- LNSB12-C700E -- 40 -- mAp-p Protection Over voltage Over temperature Short circuit The voltage will fluctuates in the vicinity of the protection value, it will recover automatically after fault condition is removed No output when exceeds temperature protection point, it will recover automatically after the temperature falls below the threshold value In hiccup mode, it will recover automatically after fault condition is removed Environment Storage Tstorage Humidity: 5% RH to 85% RH Startup at rated voltage Ambient operating temperature Ta (Output current: 150~240mA) Startup at rated voltage (Output current: 350~700mA) Hot-spot on case Maximum case temperature www.pairuigroup.com Tc (Output current: 150~240mA) Hot-spot on case (Output current: 350~700mA) Page: 2 / 5 -30 -- +80 ℃ -20 -- +40 ℃ -20 -- +50 ℃ -- -- +65 ℃ -- -- +75 ℃ Date: 07/18/2015 *Subject to change without prior notice. Constant current dimmable LED Drivers For indoor use LNSB-12C Series, 12 Watt, Phase-Cut Dimmable ELECTRICAL Environment Parameters Operating relative humidity Symbols Test Conditions / Comment Min. Typ. Max. Units Ha Non condensing 5 -- 85 % -- 35 -- kHrs -- 35 -- kHrs Full load, (Output current: 150~240mA) MTBF TMTBF ℃ 65 ambient temperature Full load, (Output current: 350~700mA) ℃ 75 Dimming operation ambient temperature Use a leading or trailing dimmer to adjust the output current value by input AC(L) terminal, the dimming range is 10%~100% Waterproof Dimension(LxWxH) IP20 165.0 x 45.0 x 20.0mm Weight 105g max. Safety / EMC Safety standards Design refer to EN61347-1, EN61347-2-13 EMC Design refer to EN55015, EN61000-3-2, EN61547, EN62384, EN62493 Notes: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 Vin = 220Vac to 240Vac. ℃ and MECHANICAL Unit: mm www.pairuigroup.com Page: 3 / 5 Date: 07/18/2015 *Subject to change without prior notice. Constant current dimmable LED Drivers For indoor use LNSB-12C Series, 12 Watt, Phase-Cut Dimmable ELECTRICAL CURVE PF vs Load Efficiency vs Load NOTE DIMMING CONNECTION www.pairuigroup.com Page: 4 / 5 Date: 07/18/2015 *Subject to change without prior notice. Constant current dimmable LED Drivers For indoor use LNSB-12C Series, 12 Watt, Phase-Cut Dimmable NOTE Leading Edge Trailing Edge www.pairuigroup.com Page: 5 / 5 Date: 07/18/2015 *Subject to change without prior notice.