UNISONIC TECHNOLOGIES CO., LTD U74HC4052 CMOS IC DUAL 4-CHANNEL ANALOG MULTIPLEXER, DEMULTIPLEXER DESCRIPTION The U74HC4052 provides common select logic. Each multiplexer has four independent inputs/outputs and a common input/output. FEATURES * Wide analog input voltage range from -5V to +5V * Low on-resistance * Logic level translation: to enable 5V logic to communicate with ±5V analog signals * Typical “break before make” built in ORDERING INFORMATION Ordering Number Lead Free Halogen Free U74HC4052L-D16-T U74HC4052G-D16-T U74HC4052G-S16-R U74HC4052G-P16-R Package Packing DIP-16 SOP-16 TSSOP-16 Tube Tape Reel Tape Reel MARKING DIP-16 www.unisonic.com.tw Copyright © 2016 Unisonic Technologies Co., Ltd SOP-16 / TSSOP-16 1 of 9 QW-R502-243.D U74HC4052 PIN CONFIGURATION FUNCTION TABLE (each gate) INPUT(S1) INPUT(S0) INPUT( E ) L L L L L H L H L L H H H X X Note: H=High voltage level; L=Low voltage level; X=don’t care UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw CMOS IC CHANNEL BETWEEN nY0 and nZ nY1 and nZ nY2 and nZ nY3 and nZ none 2 of 9 QW-R502-243.D U74HC4052 CMOS IC FUCTIONAL DIAGRAM Vcc 16 S0 10 S1 9 LOGIC LEVER CONVERSION E 6 1Z 12 1Y0 14 1Y1 15 1Y2 11 1Y3 1 2Y0 5 2Y1 2 2Y2 4 2Y3 3 2Z 1-IN-4 z DECODER 8 7 GND VEE UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 13 3 of 9 QW-R502-243.D U74HC4052 CMOS IC ABSOLUTE MAXIMUM RATINGS PARAMETER Supply Voltage VCC or GND Current VEE Current Input Clamp Current Switch Diode Current Switch Current Power Dissipation RATINGS UNIT -0.5~11 V ±50 mA ±20 mA ±20 mA ±20 mA ±25 mA 500 mW DIP-16 12 mW/K PD Derate above TA>70°C SOP-16 8 mW/K 5.5 mW/K Derate above TA>60°C TSSOP-16 Storage Temperature TSTG -65 ~ +150 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. SYMBOL VCC ICC IEE IIK ISK IS RECOMMENDED OPERATING CONDITIONS PARAMETER SYMBOL Supply Voltage VCC Input Voltage Switch voltage VIN VS Input Transition Rise or Fall Rate tR, tF Operating Temperature CONDITIONS VCC-GND VCC-VEE VCC=2.0V VCC=4.5V VCC=6.0V VCC=10.0V TA MIN TYP MAX UNIT 2.0 5.0 10.0 V 2.0 5.0 10.0 V GND VCC V VEE VCC V 6.0 1000 ns 6.0 500 ns 6.0 400 ns 6.0 250 ns -40 +85 °C STATIC CHARACTERISTICS (TA=25°C) PARAMETER SYMBOL High-Level Input Voltage VIH Low-Level Input Voltage VIL Analog switch OFF-state current IS(OFF) Analog switch ON-state current IS(ON) Input Leakage Current II(LEAK) Quiescent Supply Current IQ TEST CONDITIONS VCC=2.0V VCC=4.5V VCC=6.0V VCC=9.0V VCC=2.0V VCC=4.5V VCC=6.0V VCC=9.0V VCC=10V, VEE=0V, per channel VIN=VIH or VIL all channels |VS |=VCC - VEE VCC=10V, VEE=0V, VIN=VIH or VIL |VS |=VCC - VEE VCC=6V, VEE=0V, VIN=VCC or GND VCC=10V, VEE=0V, VIN=VCC or GND VIN=VCC or GND VCC=6V, VEE=0V VIS=VEE or VCC VCC=10V,VEE=0V VOS=VCC or VEE UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 1.5 3.15 4.2 6.3 TYP MAX UNIT 1.2 V 2.4 V 3.2 V 4.7 V 0.8 0.5 V 2.1 1.35 V 2.8 1.8 V 4.3 2.7 V ±1 µA ±2 µA ±2.0 µA ±1.0 ±2.0 µA µA 80 µA 160 µA 4 of 9 QW-R502-243.D U74HC4052 CMOS IC STATIC CHARACTERISTICS(Cont.) (TA=25°C) PARAMETER SYMBOL PEAK RON(PEAK) ON-Resistance RAIL RON(RAIL) Maximum On-Resistance Difference Between Any Two Channels ∆RON TEST CONDITIONS VCC=2V,VEE=0V, IS=100uA, VIS=VCC to VEE, VIN=VIH or VIL, VCC=4.5V,VEE=0V, IS=1mA, VIS=VCC to VEE, VIN=VIH or VIL, VCC=6V,VEE=0V, IS=1mA, VIS=VCC to VEE, VIN=VIH or VIL VCC=4.5V,VEE=-4.5V, IS=1mA, VIS=VCC to VEE, VIN=VIH or VIL VCC=2V,VEE=0V, IS=100uA, VIS= VEE, VIN=VIH or VIL, VCC=4.5V,VEE=0V, IS=1mA, VIS= VEE, VIN=VIH or VIL, VCC=6V,VEE=0V, IS=1mA, VIS= VEE, VIN=VIH or VIL VCC=4.5V,VEE=-4.5V, IS=1mA, VIS= VEE, VIN=VIH or VIL VCC=2V,VEE=0V, IS=100uA, VIS= VCC, VIN=VIH or VIL, VCC=4.5V,VEE=0V, IS=1mA, VIS= VCC, VIN=VIH or VIL, VCC=6V,VEE=0V, IS=1mA, VIS= VCC, VIN=VIH or VIL VCC=4.5V,VEE=-4.5V, IS=1mA, VIS= VCC, VIN=VIH or VIL VCC=2V,VEE=0V, VIS=VCC to VEE, VIN=VIH or VIL, VCC=4.5V,VEE=0V, VIS=VCC to VEE, VIN=VIH or VIL, VCC=6V,VEE=0V, VIS=VCC to VEE, VIN=VIH or VIL VCC=4.5V,VEE=-4.5V, VIS=VCC to VEE, VIN=VIH or VIL MIN TYP MAX UNIT Ω 100 225 Ω 90 200 Ω 70 165 Ω 150 Ω 80 175 Ω 70 150 Ω 60 130 Ω 150 Ω 90 200 Ω 80 175 Ω 65 150 Ω Ω 9 Ω 8 Ω 6 Ω DYNAMIC CHARACTERISTICS (TA=25°C, GND=0V; tR=tF=6ns; CL=50pF) PARAMETER SYMBOL Propagation Delay From VIS to VOS tPHL/tPLH Turn-ON Time E Sn to VOS tPZH/tPZL Turn-OFF Time E Sn to VOS tPHZ/tPLZ TEST CONDITIONS VCC=2V, VEE=0V, RL=∞ VCC=4.5V, VEE=0V, RL=∞ VCC=6V, VEE=0V, RL=∞ VCC=4.5V, VEE=-4.5V, RL=∞ VCC=2V, VEE=0V, RL=∞ VCC=4.5V, VEE=0V, RL=∞ VCC=6V, VEE=0V, RL=∞ VCC=4.5V, VEE=-4.5V, RL=∞ VCC=2V, VEE=0V, RL=1k VCC=4.5V, VEE=0V, RL=1k VCC=6V, VEE=0V, RL=1k VCC=4.5V, VEE=-4.5V, RL=1k UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP 14 5 4 4 105 38 30 26 74 27 22 22 MAX 75 15 13 10 405 81 69 58 315 63 54 48 UNIT ns ns ns ns ns ns ns ns ns ns ns ns 5 of 9 QW-R502-243.D U74HC4052 CMOS IC TEST CIRCUIT AND WAVEFORMS Test circuit for measuring OFF-state current Test circuit for measuring ON-state current Test circuit for measuring RON UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 9 QW-R502-243.D U74HC4052 CMOS IC TEST CIRCUIT AND WAVEFORMS(Cont.) Waveforms showing the Input (VIS) to Output (VOS) propagation delays Waveforms showing the turn-on and turn-off times. tTHL tTLH E,Sn Input 90% 50% 50% 10% tPLZ 50% 10% Vos Output tPZL tPHZ tPZH Vos Output 90% 50% Swith ON Swith OFF Swith ON Note: VIN=GND to VCC UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 9 QW-R502-243.D U74HC4052 CMOS IC TEST CIRCUIT AND WAVEFORMS(Cont.) Input pulse definitions Test circuit for measuring AC performance. TEST SWITCH VIS tPZH VEE VCC tPZL VCC VEE tPHZ VEE VCC tPLZ VCC VEE other open pulse NOTE: Definitions for test circuit: RL = load resistance CL = load capacitance including jig and probe capacitance. RT = termination resistance should be equal to the output impedance ZO of the pulse generator. tTHL=tTLH=6 ns; when measuring fMAX, there is no constraint to tTHL and tTLH with 50% duty factor. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 9 QW-R502-243.D U74HC4052 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 9 of 9 QW-R502-243.D