UNISONIC TECHNOLOGIES CO., LTD U74AHC4066 CMOS IC QUADRUPLE BILATERAL ANALOG SWITCH DESCRIPTION The U74AHC4066 is a quadruple bilateral analog switch which has 4 channels. FEATURES * Operate From 2V to 5.5V * Max tPD of 7ns at 5 V * Low Power Dissipation: ICC=20μA(Max) * Low Input Current: II(L)=1μA(Max) ORDERING INFORMATION Ordering Number U74AHC4066G-S14-R U74AHC4066G-P14-R Package SOP-14 TSSOP-14 Packing Tape Reel Tape Reel MARKING www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd 1 of 8 QW-R502-274.D U74AHC4066 CMOS IC PIN CONFIGURATION 1A 1 14 VCC 1B 2 13 1C 2B 3 12 4C 2A 4 11 4A 2C 5 10 4B 3C 6 9 3B GND 7 8 3A FUNCTION TABLE INPUTS CONTROL (C) H L Note: H: HIGH voltage level; L: LOW voltage level. SWITCH ON OFF LOGIC DIAGRAM One Of Four Switches UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 of 8 QW-R502-274.D U74AHC4066 CMOS IC ABSOLUTE MAXIMUM RATING (TA=25°С,unless otherwise specified) PARAMETER SYMBOL RATINGS UNIT Supply Voltage VCC -0.5 ~ +7 V Input Voltage VIN -0.5 ~ +7 V Switch I/O Voltage VIO -0.5 ~ VCC +0.5 V VCC or GND Current ICC ±50 mA Output Clamp Current IOK ±50 mA Input Clamp Current IIK -20 mA On-State Switch Current IT ±25 mA Operating Temperature TOPR -40 ~ + 85 °С Storage Temperature TSTG -65 ~ + 150 °С Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL DATA PARAMETER SYMBOL RATINGS SOP-14 86 Junction to Ambient θJA TSSOP-14 113 Note: The package thermal impedance is calculated in accordance with JESD 51-7. UNIT °С/W °С/W RECOMMENDED OPERATING CONDITIONS PARAMETER Supply Voltage High-Level Input Voltage Low-Level Input Voltage SYMBOL VCC VIH VIL Input Voltage Output Voltage VIN VOUT Input Transition Rise or Fall Rate tR / tF TEST CONDITIONS VCC=2V VCC=2.3V to 2.7V VCC=3V to 3.6V VCC=4.5V to 5.5V VCC=2V VCC=2.3V to 2.7V VCC=3V to 3.6V VCC=4.5V to 5.5V VCC=2.3V to 2.7V VCC=3V to 3.6V VCC=4.5V to 5.5V TYP MAX 5.5 UNIT V VCC x 0.7 V VCC x 0.7 VCC x 0.7 0.5 VCC x 0.3 VCC x 0.3 V VCC x 0.3 0 0 UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 2 1.5 5.5 VCC 200 100 20 V V ns/V 3 of 8 QW-R502-274.D U74AHC4066 CMOS IC ELECTRICAL CHARACTERISTICS (TA=25°С,unless otherwise specified) PARAMETER SYMBOL On-state Switch Resistance RON Peak On-state Resistance RON(P) Difference In On-state Resistance Between Switches ∆RON Control Input Current On-state Switch Leakage Current II(CTL) IS(ON) Off-state Switch Leakage Current IS(OFF) Quiescent Supply Current Control Input Capacitance Feed-through Capacitance Switch Input/Output Capacitance IQ CIC CF CIO TEST CONDITIONS VCC=2.3V IT=-1mA, VIN=GND or VCC=3V VCC, VC= VIH VCC=4.5V VCC=2.3V IT=-1mA, VIN=GND to VCC=3V VCC, VC= VIH VCC=4.5V VCC=2.3V IT=-1mA, VIN=GND to VCC=3V VCC, VC= VIH VCC=4.5V VCC=0 to 5.5V, VC= 5.5V or GND VCC=5.5V, VIN= VCC or GND, VC= VIH VCC=5.5V, VIN= VCC and VO=GND, or VIN=GND and VO= VCC, VC= VIL VCC=5.5V, VC=VCC or GND MIN TYP 38 29 21 143 57 31 6 3 2 1.5 0.5 5.5 MAX UNIT 180 Ω 150 75 500 180 Ω 100 30 Ω 20 15 ±0.1 μA ±0.1 μA ±0.1 μA 2 μA pF pF pF SWITCHING CHARACTERISTICS (TA=25°C, see test circuit and waveforms) PARAMETER SYMBOL Propagation Delay Time, From A to B Or B to A tPLH/tPHL Propagation Delay Time, From A to B Or B to A tPLH/tPHL Switch Turn-on Time, From C to A or B tPZL/tPZH Switch Turn-on Time, From C to A or B tPZL/tPZH Switch Turn-off Time, From C to A or B tPLZ/tPHZ Switch Turn-off Time, From C to A or B tPLZ/tPHZ UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw TEST CONDITIONS VCC=2.5V±0.2V CL =15pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=2.5V±0.2V CL =50pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=2.5V±0.2V CL =15pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=2.5V±0.2V CL =50pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=2.5V±0.2V CL =15pF VCC=3.3V±0.3V VCC=5V±0.5V VCC=2.5V±0.2V CL =50pF VCC=3.3V±0.3V VCC=5V±0.5V MIN TYP MAX UNIT 1.2 10 ns 0.8 6 0.3 4 2.6 12 ns 1.5 9 0.6 6 3.3 15 ns 2.3 11 1.6 7 4.2 25 ns 3 18 2.1 12 6 15 4.5 11 ns 3.2 7 9.6 25 ns 7.2 18 5.1 12 4 of 8 QW-R502-274.D U74AHC4066 ANALOG SWITCHING CHARACTERISTICS (TA=25°С,unless otherwise specified) PARAMETER Frequency Response (Switch On), From A to B Or B to A Crosstalk (Between Any Switches), From A to B Or B to A Crosstalk (Control Input To Signal Output), From C to A or B Feed-through Attenuation (Switch Off), From A to B Or B to A Sine-wave Distortion CMOS IC SYMBOL TEST CONDITIONS CL= 50pF, RL=600Ω, VCC=2.3V fIN=1MHZ, VCC=3V 20log10 (VO/VI)=-3dB VCC=4.5V VCC=2.3V CL= 50pF, RL=600Ω, VCC=3V fIN=1MHZ VCC=4.5V VCC=2.3V CL= 50pF, RL=600Ω, VCC=3V fIN=1MHZ VCC=4.5V VCC=2.3V CL= 50pF, RL=600Ω, VCC=3V fIN=1MHZ VCC=4.5V VCC=2.3V, VI=2 VP-P CL= 50pF, RL=10KΩ, VCC=3V, VI=2.5 VP-P fIN=1KHZ VCC=4.5V, VI=4 VP-P MIN TYP 30 35 50 -45 -45 -45 15 20 50 -40 -40 -40 0.1 0.1 0.1 MAX UNIT TYP 4.5 MAX UNIT pF MHZ dB mV dB % OPERATING CHARACTERISTICS (TA=25°С,unless otherwise specified) PARAMETER Power Dissipation Capacitance SYMBOL TEST CONDITIONS CPD CL =50pF,f=1MHz UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN 5 of 8 QW-R502-274.D U74AHC4066 CMOS IC TEST CIRCUIT AND WAVEFORMS Test circuit for measuring ON-state resistance RON Test circuit for measuring OFF-state current Test circuit for measuring ON-state current UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 6 of 8 QW-R502-274.D U74AHC4066 CMOS IC TEST CIRCUIT AND WAVEFORMS(Cont.) Test circuit for measuring propagation delay time, switching time Waveforms showing the Input(VI) to Output(VO) propagation delays Waveforms showing the turn-on and turn-off times Note: CL includes probe and jig capacitance. All input pulses are supplied by generators having the following characteristics: PRR ≤1MHz, Zo = 50Ω, tr ≤3ns, tf ≤3ns. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 7 of 8 QW-R502-274.D U74AHC4066 CMOS IC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 8 of 8 QW-R502-274.D