NTE580−1 General Purpose Silicon Rectifier Ultra Fast Recovery DO201AD Type Package Features: D Diffused Junction D Low Forward Voltage Drop D High Current Capability D High Reliability D High Surge Current Capability Maximum Ratings and Electrical Characteristics: (TA = +25°C unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%) Maximum Peak Repetitive Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V Maximum Working Peak Reverse Voltage, VRWM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V Maximum DC Blocking Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 600V Maximum RMS Reverse Voltage, VR(RMS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420V Maximum Average Rectified Output Current (.375” (9.5mm) Lead Length, TA = +55°C), IO . . . . 3A Non−Repetitive Peak Forward Surge Current, IFSM (8.3ms Single Half Sine−Wave Superimposed on Rated Load) . . . . . . . . . . . . . . . . . . . . 150A Maximum Instantaneous Forward Voltage (IF = 3A), VFM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7V Maximum Peak Reverse Current (VR = 600V), IRM TA = +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10μA TA = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100μA Maximum Reverse Recovery Time (Note 1), trr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75ns Typical Junction Capacitance (Note 2), Cj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50pF Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +125°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65° to +150°C Note 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A. Note 2. Measured at 1MHz and applied reverse voltage of 4V. 1.000 (25.4) Min .374 (9.5) Max .051 (1.3) Dia Max .208 (5.3) Dia Max Color Band Denotes Cathode