NTE NTE572

NTE572
Silicon Rectifier
General Purpose, Fast Recovery
Features:
D Fast Switching
D Low Leakage
D Low Forward Voltage Drop
D High Current Capability
D High Current Surge
D High Reliability
Maximum Ratings and Electrical Characteristics: (TA = +25°C unless otherwise specified. Single
phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%.)
Maximum Recurrent Peak Reverse Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000V
Maximum RMS Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 700V
Maximum DC Blocking Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000V
Maximum Average Forward Rectified Current (.375” (9.5mm) lead length, TA = +55°C) . . . . . . . 6A
Peak Forward Surge Current (8.3ms single half sine–wave superimposed on rated load) . . . 300A
Maximum Instantaneous Forward Voltage (IF = 6A DC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3V
Maximum DC Reverse Current (At Rated DC Blocking Voltage, TA = +25°C) . . . . . . . . . . . . . . 10µA
Maximum Full Load Reverse Current
(Full Cycle Average .375” (9.5mm) lead length, TL = +55°C) . . . . . . . . . . . . . . . . . . . . . 150µA
Maximum Reverse Recovery Time (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns
Typical Junction Capacitance (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100pF
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +175°C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +175°C
Note 1. Reverse Recovery Test Conditions: IF = 500mA, IR = 1A, IRR = 250mA.
Note 2. Measured at 1MHz and applied reverse voltage of 4.0 volts.
1.000
(25.4)
Min
.360
(9.1)
Max
.052 (1.3) Dia Max
Color Band Denotes Cathode
.360 (9.1)
Dia Max