506

NTE506
Silicon Rectifier Diode
DO−41/DO−15 Type Package
Features:
D Low Reverse Leakage
D High Forward Surge Current Capability
Maximum Ratings and Electrical Characteristics: (TA = +25C unless otherwise specified. Single
phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%)
Peak Repetitive Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500V
Maximum RMS Voltage, VRMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1050V
Maximum DC Blocking Voltage, VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1500V
Maximum Average Rectified Forward Current (.375” (9.5mm) lead length), I(AV) . . . . . . . . . 500mA
Peak Forward Surge Current, IFSM
(8.3ms single half sine−wave superimposed on rated load) . . . . . . . . . . . . . . . . . . . . . . . . 30A
Maximum Instantaneous Forward Voltage (IF = 500mA), VF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5V
Maximum DC Reverse Current (VR = 1500V), IR
TA = +25C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5mA
TA = +100C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50mA
Maximum Reverse Recovery Time (Note 1), trr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 500ns
Typical Junction Capacitance (Note 2), CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15pF
Typical Thermal Resistance, Junction−to−Ambient (Note 3), RthJA . . . . . . . . . . . . . . . . . . . . 50C/W
Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65 to +150C
Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −65 to +150C
Lead Temperature (During soldering, .375” (9.5mm) from case, 10sec max), TL . . . . . . . . . +250C
Note 1. Reverse recovery condition IF = 500mA, IR = 1A, Irr = 250mA.
Note 2. Measured at 1.0MHz and applied reverse voltage of 4.0V DC.
Note 3. Thermal resistance from junction to ambient at .375” (9.5mm) lead length, PCB mounted.
1.102
(28.0)
Min
.275
(7.0)
Max
.047 (1.19) Dia Max
.157 (4.0)
Dia Max
Color Band Denotes Cathode
Rev. 9−15