NTE NTE576

NTE576
5.0 Ampere Super Fast Rectifier
Features:
D Low Forward Voltage Drop
D High Current Capability
D High Reliability
D High Surge Current Capability
Maximum Ratings and Electrical Characteristics: (TA = +25°C unless otherwise specified.
Resistive or inductive load 60Hz. For capacitive load, derate current by 20%.)
Recurrent Peak Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V
RMS Voltage, VRMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280V
DC Blocking Voltage, VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V
Average Forward Output Rectified Current,
[.375 (9.5mm) lead length at TA = 55°C] . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0A(AV)
Peak Forward Surge Current,
(8.3ms single half sine–wave superimposed on rated load ) . . . . . . . . . . . . . . . . . . . . 150A(PK)
Instantaneous Forward Voltage Drop at 5.0A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.25V(PK)
Full Load Reverse Current at Rated DC Blocking Voltage
TA = +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.0µA
TA = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50µA
Maximum Reverse Recovery Time (Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35ns
Typical Junction Capacitance (Note 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150pF
Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
StorageTemperature Range, TSTG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –65° to +150°C
Note 1. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1.0A, IRR = 0.25A.
Note 2. Measured at 1MHz and applied reverse voltage of 4.0VDC.
1.000
(25.4)
Min
.371
(9.4)
Max
.050 (1.27) Dia Max
Color Band Denotes Cathode
.250 (6.35)
Dia Max