Product Overview

V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Optocoupler Product Portfolio
TABLE OF CONTENTS
Introduction........................................................................................................................... 2
Phototransistor...................................................................................................................... 5
Isolators - AC Input..............................................................................................................18
Darlington ............................................................................................................................21
Linear Optocoupler...............................................................................................................23
High-Speed Optocouplers...................................................................................................24
Phototriacs...........................................................................................................................27
Solid-State Relays ...............................................................................................................31
IGBT and MOSFET Drivers..................................................................................................33
Part number Coding.............................................................................................................34
Assembly Instructions..........................................................................................................36
Packaging Information.........................................................................................................40
Packaging Tape and Reel Information.................................................................................42
Product Marking...................................................................................................................47
Application Examples...........................................................................................................47
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
Brochure Type
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Introduction
In an electrical circuit, an optocoupler ensures total electric isolation, including potential isolation, as in the case of a
transformer. In practice, this means that the control circuit is located on one side of the optocoupler, i.e., the emitter side, while
the load circuit is located on the other side, i.e., the detector side. Both circuits are electrically isolated by the optocoupler.
Signals from the control circuit are transmitted optically to the load circuit. In most cases, this optical transmission is realized
with light beams whose wavelengths span the red to infrared range, depending on the requirements applicable to the
optocoupler. The bandwidth of the signal to be transmitted ranges from a dc voltage signal to frequencies in the MHz band.
An optocoupler is comparable to a transformer or relay. Besides having smaller dimensions in most cases, the advantages of
optocouplers are shorter switching times, no contact bounce, no interference caused by arcs, and no wear to the circuitry.*
Optocouplers are suitable for circuits used in microelectronics, data processing, and telecommunication systems. Optocouplers
are used to an increasing extent as safety tested components, e.g., in switch mode power supplies.
* Note: See Applications Notes for additional information.
Design
An optocoupler has to fulfill five essential requirements:
• Good isolation
• High current transfer ratio (CTR)
• Low degradation
• Low coupling capacitance
• No interference by field strength influences
These factors are essentially dependent on the design, the materials used, and the corresponding chips used for the emitter/
detector.
Brochure Type
2/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Construction
Vishay’s over-under construction optimizes optical transfer efficiency and the need for effective insulation and isolation. The
direct optical path from LED and detector optimizes the photon flux on the detector, while providing the highest possible
Distance through insulation (DTI). Because of their high DTI most Vishay couplers are rated as “reinforced insulation” by
meeting a DTI > 0.4 mm. For those devices that come in packages too small to meet the DTI > 0.4mm, reinforced isolation is
achieved through testing.
Clear epoxy compound
Emitter die
Reflected radiance
Bond wire
Epoxy compound
Infrared emitter die
Special mold
compound
Leadframe
Infrared permeable
mold compound
Leadframe
Detector die
17358
Bond wire
17357
Detector die
Packages and Functions
Isolation Test Voltage (RMS)
Based on Package Type
15.0 kV
11.8 kV
5.3 kV
4.0 kV
3.75 kV
3.0 kV
1.75 kV
Brochure Type
3/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Optocoupler
Structure
DC-Input
AC-Input
DC-Input
AC-Input
Photodiode-transistor
Dual Channel
OC-Output
Totem Pole Output
Phototransistor
Photo-Darlington
Analog
High-Speed
Digital
Linear
K1
Photodiode
K2
Non Zero-crossing
Zero-crossing
Phototriac
ZCC*
*Zero crossing circuit
Phototriac
Power
Phototriac
Form A
(normally open)
Form B
(normally close)
Form A/B, C
IGBT
MOSFET Driver
(photo-voltaic)
Telecom Switch
SSR (photo-MOSFET)
IGBT / MOSFET Driver
Turn
Off
Shield
Brochure Type
4/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Optocouplers / Isolators - Phototransistor Output
SSOP-4
SOP-4
SOIC-8
DIP-4
LSOP-4
DIP-6
DIP-8
(2-ch)
DIP-16
(4-ch)
HV-DIP
Phototransistor
VISO
3750 VRMS
4000 VRMS
5300 VRMS
8200 VRMS
DC input
1 mA
VOS618A
VOM618A
5 mA
VOS617A
VOM617A
10 mA
VOS615A
VO20xx,
VOD20x (2),
VOD21x (2)
VO618A
VOL618A
VO617A
VOL617A,
TCLT1100
-
-
ILD621
ILQ621
-
ILD615
ILQ1/2/5,
ILQ615
CNY64(A),
CNY65(A),
CNY66(A),
CNY65Exi
CNY17,
CNY17F
VO615A,
VO610A
-
-
TCLT1100
(5-pin)
Features
Applications
• Isolation test voltage up to 7900 VRMS
• Switch mode power supply (SMPS)
• Extensive CTR (current transfer ratio) ranges from
40 % to 600 %
• Home appliances
• Low input drive current down to 1 mA
• Industrial control and automation
• Certified to UL, CSA, VDE, Fimko, and CQC safety
standards
Resources
• Telecommunication
• RoHS-compliant, lead (Pb)-free, and eco-friendly
“green” compound
• Phototransistor Output
www.vishay.com/optocouplers/opt-tran-output/
Phototransistor
Base
Part
Number
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Package
Forward
Current
IF
Part Number
CTR
min
(%)
DIP-4
10 mA
VO610A-1
40
80
70
60
–55 to +110
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO610A-2
63
125
70
60
–55 to +110
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO610A-3
100
200
70
60
–55 to +110
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO610A-4
160
320
70
60
–55 to +110
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL,
CQC
VO610A
Safety Standard(s)
>>>
Brochure Type
5/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
DIP-4
5 mA
VO615A
50
600
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615A-1
40
80
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615A-2
63
125
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615A-3
100
200
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615A-4
160
320
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO615A-5
50
150
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO615A-6
100
300
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO615A-7
80
160
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO615A-8
130
260
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO615A-9
200
400
70
60
–55 to +110
5000
1
≥7; ≥8
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
TCET1200
50
600
70
60
–40 to +100
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL
DIP-4
10 mA
TCET1201
40
80
70
60
–40 to +100
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL
DIP-4
10 mA
TCET1202
63
125
70
60
–40 to +100
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL
DIP-4
10 mA
TCET1203
100
200
70
60
–40 to +100
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL
DIP-4
10 mA
TCET1204
160
320
70
60
–40 to +100
5000
1
≥7
BSI, VDE, FIMKO, UL, cUL
DIP-4
5 mA
VO617A
40
600
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
5 mA
VO617A-1
40
80
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
5 mA
VO617A-2
63
125
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
5 mA
VO617A-3
100
200
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
5 mA
VO617A-4
160
320
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
5 mA
VO617A-7
80
160
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
5 mA
VO617A-8
130
260
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
1 mA
VO618A
50
600
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
1 mA
VO618A-2
63
125
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
1 mA
VO618A-3
100
200
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-4
1 mA
VO618A-4
160
320
80
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
VO615A
TCET1200
VO617A
Safety Standard(s)
VO618A
>>>
Brochure Type
6/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
SFH1617A
SFH610A
SFH615A
SFH615
SFH617A
SFH618A
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Safety Standard(s)
DIP-4
10 mA
SFH1617A-1
40
80
70
60
–55 to +150
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH1617A-2
63
125
70
60
–55 to +150
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH1617A-3
100
200
70
60
–55 to +150
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH1617A-4
160
320
70
60
–55 to +150
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH610A-1
40
80
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH610A-2
63
125
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH610A-3
100
200
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH610A-4
160
320
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH610A-5
250
500
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-4
10 mA
SFH615A-1
40
80
70
60
–55 to +100
5300
1
≥7; ≥8
UL, cUL, BSI, FIMKO, VDE
DIP-4
10 mA
SFH615A-2
63
125
70
60
–55 to +100
5300
1
≥7; ≥8
UL, VDE
DIP-4
10 mA
SFH615A-3
100
200
70
60
–55 to +100
5300
1
≥7; ≥8
UL, VDE
DIP-4
10 mA
SFH615A-4
160
320
70
60
–55 to +100
5300
1
≥7; ≥8
UL, VDE
DIP-4
10 mA
SFH615AA
50
600
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH615AB
80
260
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH615ABL
200
600
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH615ABM
200
400
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH615AGB
100
600
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH615AGR
100
300
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH615AY
50
150
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, VDE
DIP-4
10 mA
SFH617A-1
40
80
70
60
–55 to +110
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
DIP-4
10 mA
SFH617A-2
63
125
70
60
–55 to +110
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
DIP-4
10 mA
SFH617A-3
100
200
70
60
–55 to +110
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
DIP-4
10 mA
SFH617A-4
160
320
70
60
–55 to +110
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
DIP-4
1 mA
SFH618A-2
63
125
55
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
DIP-4
1 mA
SFH618A-3
100
200
55
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
DIP-4
1 mA
SFH618A-4
160
320
55
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
500
DIP-4
1 mA
SFH618A-5
250
55
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
TCED1100
DIP-4
1 mA
TCED1100
600
35
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, FIMKO
TCED1100G
DIP-4
1 mA
TCED1100G
600
35
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, FIMKO
TCET1100
DIP-4
5 mA
TCET1100
50
600
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1101
DIP-4
10 mA
TCET1101
40
80
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1102
DIP-4
10 mA
TCET1102
63
125
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1103
DIP-4
10 mA
TCET1103
100
200
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1104
DIP-4
10 mA
TCET1104
160
320
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1105
DIP-4
10 mA
TCET1105
50
150
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1106
DIP-4
5 mA
TCET1106
100
300
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1107
DIP-4
5 mA
TCET1107
80
160
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1108
DIP-4
5 mA
TCET1108
130
260
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
>>>
Brochure Type
7/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
Forward
Package Current
IF
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
5 mA
TCET1109
200
400
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
Safety Standard(s)
TCET1109
DIP-4
TCET1100G
DIP-4
5 mA
TCET1100G
50
600
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1101G
DIP-4
10 mA
TCET1101G
40
80
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1102G
DIP-4
10 mA
TCET1102G
63
125
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1103G
DIP-4
10 mA
TCET1103G
100
200
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1104G
DIP-4
10 mA
TCET1104G
160
320
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1105G
DIP-4
10 mA
TCET1105G
50
150
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1106G
DIP-4
5 mA
TCET1106G
100
300
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1107G
DIP-4
5 mA
TCET1107G
80
160
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1108G
DIP-4
5 mA
TCET1108G
130
260
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET1109G
DIP-4
5 mA
TCET1109G
200
400
70
60
–55 to +100
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
5 mA
TCET1100
50
600
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
TCET1102
63
125
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
TCET1103
100
200
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
TCET1104
160
320
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
5 mA
TCET1100G
50
600
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
TCET1102G
63
125
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
TCET1103G
100
200
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
TCET1104G
160
320
70
60
–40 to +110
5000
1
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-4
10 mA
VO615C-1
40
80
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615C-2
63
125
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615C-3
100
200
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
10 mA
VO615C-4
160
320
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO617C-1
40
80
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO617C-2
63
125
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO617C-3
100
200
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4
5 mA
VO617C-4
160
320
70
60
–55 to +110
5000
1
BSI, VDE, FIMKO, UL, cUL,
CQC
DIP-4 HV
10 mA
CNY65Exi
50
300
32
75
–55 to +85
11600
1
ATEX
DIP-4 HV
10 mA
CNY65BExi
100
200
32
75
–55 to +85
11600
1
ATEX
DIP-4 HV
10 mA
CNY64
50
300
32
75
–55 to +85
8200
1
UL, VDE
DIP-4 HV
10 mA
CNY64A
50
300
32
75
–55 to +85
8200
1
UL, VDE
DIP-4 HV
10 mA
CNY64B
50
300
32
75
–55 to +85
8200
1
UL, VDE
DIP-4 HV
10 mA
CNY65
63
125
32
75
–55 to +85
8200
1
UL, VDE
DIP-4 HV
10 mA
CNY65A
63
125
32
75
–55 to +85
8200
1
UL, VDE
DIP-4 HV
10 mA
CNY65B
63
125
32
75
–55 to +85
8200
1
UL, VDE
TCET1110
VO615C
VO617C
CNY65Exi
CNY64
CNY65
>>>
Brochure Type
8/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
Forward
Package Current
IF
CNY651
DIP-4 HV
5 mA
DIP-4 HV
DIP-4 HV
CNY64S
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
CNY651AGR
100
300
32
75
–55 to +85
8200
1
UL, cUL, VDE
10 mA
CNY66
100
200
32
75
–55 to +85
8200
1
UL, VDE
10 mA
CNY66B
100
200
32
75
–55 to +85
8200
1
UL, VDE
SMD-4 HV
5 mA
CNY64ST
50
300
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY64S
SMD-4 HV
5 mA
CNY64AYST
50
150
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY64S
SMD-4 HV
5 mA
CNY64ABST
80
240
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY64S
SMD-4 HV
5 mA
CNY64AGRST
100
300
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY65S
SMD-4 HV
5 mA
CNY65ST
50
300
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY65S
SMD-4 HV
5 mA
CNY65AYST
50
150
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY65S
SMD-4 HV
5 mA
CNY65ABST
80
240
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY65S
SMD-4 HV
5 mA
CNY65AGRST
100
300
32
75
–55 to +85
8200
1
UL, cUL, VDE
CNY651
SMD-4 HV
5 mA
CNY651AYST
50
150
32
75
–40 to +110
8200
1
UL, cUL, VDE
CNY651
SMD-4 HV
5 mA
CNY651AGRST
100
300
32
75
–40 to +110
8200
1
UL, cUL, VDE
SMD-4
10 mA
SFH6106-1
40
80
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
SMD-4
10 mA
SFH6106-2
63
125
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
SMD-4
10 mA
SFH6106-3
100
200
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
SMD-4
10 mA
SFH6106-4
160
320
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
SMD-4
10 mA
SFH6106-5
250
500
70
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
CNY66
SFH6106
SMD-4
10 mA
SFH6156-1
40
80
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO,
CQC
SMD-4
10 mA
SFH6156-2
63
125
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO,
CQC
SMD-4
10 mA
SFH6156-3
100
200
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO,
CQC
SMD-4
10 mA
SFH6156-4
160
320
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO,
CQC
SMD-4
1 mA
SFH6186-2
63
125
55
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
SMD-4
1 mA
SFH6186-3
100
200
55
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
SMD-4
1 mA
SFH6186-4
160
320
55
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
SFH6156
SFH6186
Safety Standard(s)
SMD-4
1 mA
SFH6186-5
250
500
55
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE, FIMKO
TCMT110
SMD-4
5 mA
TCMT1110
50
600
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1111
SMD-4
5 mA
TCMT1111
40
80
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1112
SMD-4
10 mA
TCMT1112
63
125
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1113
SMD-4
10 mA
TCMT1113
100
200
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1114
SMD-4
10 mA
TCMT1114
160
320
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1115
SMD-4
10 mA
TCMT1115
50
150
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1116
SMD-4
10 mA
TCMT1116
100
300
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1117
SMD-4
5 mA
TCMT1117
80
160
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1118
SMD-4
5 mA
TCMT1118
130
260
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
TCMT1119
SMD-4
5 mA
TCMT1119
200
400
70
50
–45 to +110
3750
1
≥5
UL, BSI, cUL, VDE
>>>
Brochure Type
9/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
VOM618A
VOM617A
VOS615A
VOS617A
VOS618A
VOL617A
>>>>
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Safety Standard(s)
SOP-4
1 mA
VOM618A
50
600
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-1
40
80
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-2
63
125
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-3
100
200
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-4
160
320
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-5
50
100
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-7
80
160
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
1 mA
VOM618A-8
130
260
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A
50
600
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-2
63
125
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-3
100
200
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-4
160
320
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-6
250
500
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-7
80
160
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-8
130
260
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SOP-4
5 mA
VOM617A-9
200
400
80
60
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
10 mA
VOS615A
50
600
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
10 mA
VOS615A-1
40
80
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
10 mA
VOS615A-2
63
125
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
10 mA
VOS615A-3
100
200
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
10 mA
VOS615A-4
160
320
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A
50
600
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A-2
63
125
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A-3
100
200
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A-4
160
320
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A-7
80
160
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A-8
130
260
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
5 mA
VOS617A-9
200
400
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
1 mA
VOS618A
50
600
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
1 mA
VOS618A-2
63
125
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
1 mA
VOS618A-3
100
200
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
1 mA
VOS618A-7
80
160
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
SSOP-4
1 mA
VOS618A-8
130
260
80
50
–55 to +110
3750
1
≥5
UL, cUL, VDE, FIMKO, CQC
LSOP-4
5 mA
VOL617A-1
40
80
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
5 mA
VOL617A-2
63
125
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
5 mA
VOL617A-3
100
200
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
5 mA
VOL617A-4
160
320
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
>>>
Brochure Type
10/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
VOL617A
(cont)
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
LSOP-4
5 mA
VOL617A-8
130
260
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
10 mA
VOL628A-2
63
125
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
10 mA
VOL628A-3
100
200
80
60
–55 to +110
5000
1
≥5
UL, cUL, VDE, BSI, FIMKO,
CQC
SOP-4
5 mA
SFH690AB
50
300
70
50
–55 to +100
3750
1
≥5
UL, cUL, BSI, VDE, CQC
SOP-4
5 mA
SFH690A
50
150
70
50
–55 to +100
3750
1
≥5
UL, cUL, BSI, VDE, CQC
SOP-4
5 mA
SFH690B
100
300
70
50
–55 to +100
3750
1
≥5
UL, cUL, BSI, VDE, CQC
SOP-4
5 mA
SFH690C
100
200
70
50
–55 to +100
3750
1
≥5
UL, cUL, BSI, VDE, CQC
SOP-4
5 mA
SFH690D
200
400
70
50
–55 to +100
3750
1
≥5
UL, cUL, BSI, VDE, CQC
SOP-4
5 mA
SFH1690AB
50
300
70
50
–55 to +110
3750
1
≥5
UL, cUL, BSI, VDE
SOP-4
5 mA
SFH1690A
50
150
70
50
–55 to +110
3750
1
≥5
UL, cUL, BSI, VDE
SOP-4
5 mA
SFH1690B
100
300
70
50
–55 to +110
3750
1
≥5
UL, cUL, BSI, VDE
VOL618A
SFH690
SFH1690
Safety Standard(s)
SOP-4
5 mA
SFH1690C
100
200
70
50
–55 to +110
3750
1
≥5
UL, cUL, BSI, VDE
TCMT1100
SOP-4
5 mA
TCMT1100
50
600
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1101
SOP-4
10 mA
TCMT1101
40
80
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1102
SOP-4
10 mA
TCMT1102
63
125
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1103
SOP-4
10 mA
TCMT1103
100
200
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1104
SOP-4
10 mA
TCMT1104
160
320
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1105
SOP-4
10 mA
TCMT1105
50
150
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1106
SOP-4
5 mA
TCMT1106
100
300
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1107
SOP-4
5 mA
TCMT1107
80
160
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1108
SOP-4
5 mA
TCMT1108
130
260
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
TCMT1109
SOP-4
5 mA
TCMT1109
200
400
70
50
–55 to +100
3750
1
≥5
UL, BSI, cUL, VDE, FIMKO
LSOP-4
5 mA
TCLT1000
50
600
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
10 mA
TCLT1001
40
80
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
10 mA
TCLT1002
63
125
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
10 mA
TCLT1003
100
200
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
10 mA
TCLT1004
160
320
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
10 mA
TCLT1005
50
150
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
5 mA
TCLT1006
100
300
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
5 mA
TCLT1007
80
160
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
5 mA
TCLT1008
130
260
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-4
5 mA
TCLT1009
200
400
70
60
–55 to +110
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
5 mA
TCLT1100
50
600
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
10 mA
TCLT1101
40
80
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
10 mA
TCLT1102
63
125
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
10 mA
TCLT1103
100
200
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
10 mA
TCLT1104
160
320
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
10 mA
TCLT1105
50
150
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
TCLT1010
Series
TCLT11..
Series
>>>>
>>>
Brochure Type
11/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
TCLT11..
Series
(cont)
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Safety Standard(s)
LSOP-5
5 mA
TCLT1106
100
300
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
5 mA
TCLT1107
80
160
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
5 mA
TCLT1108
130
260
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
LSOP-5
5 mA
TCLT1109
200
400
80
60
–55 to +100
5000
1
≥8
UL, BSI, cUL, VDE, FIMKO
TCLT1110
LSOP-5
5 mA
TCLT1110
50
600
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1111
LSOP-5
10 mA
TCLT1111
40
80
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1112
LSOP-5
10 mA
TCLT1112
63
125
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1113
LSOP-5
10 mA
TCLT1113
100
200
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1114
LSOP-5
10 mA
TCLT1114
160
320
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1115
LSOP-5
10 mA
TCLT1115
50
150
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1116
LSOP-5
5 mA
TCLT1116
100
300
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1117
LSOP-5
5 mA
TCLT1117
80
160
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1118
LSOP-5
5 mA
TCLT1118
130
260
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
TCLT1119
LSOP-5
5 mA
TCLT1119
200
400
80
60
–55 to +110
5000
1
≥8
UL, cUL, VDE
DIP-6
10 mA
SFH600-0
40
80
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH600-1
63
125
70
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH600-2
100
200
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH600-3
160
320
70
60
–55 to +100
5300
1
≥7
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH601-1
40
80
100
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH601-2
63
125
100
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH601-3
100
200
100
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH601-4
160
320
100
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
1 mA
SFH608-2
63
125
55
50
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
1 mA
SFH608-3
100
200
55
50
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
1 mA
SFH608-4
160
320
55
50
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
1 mA
SFH608-5
250
500
55
50
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH640-1
40
80
300
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
DIP-6
10 mA
SFH640-2
63
125
300
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
200
SFH600
SFH601
SFH608
SFH640
DIP-6
10 mA
SFH640-3
100
300
60
–55 to +100
5300
1
≥7; ≥8
UL, BSI, cUL, VDE
TCDT1110
DIP-6
10 mA
TCDT1110
100
70
60
–55 to +100
5300
1
≥7
UL, BSI, VDE, FIMKO
TCDT1110G
DIP-6
10 mA
TCDT1110G
100
70
60
–55 to +100
5300
1
≥8
UL, BSI, VDE, FIMKO
TCDT1100
DIP-6
10 mA
TCDT1100
40
32
60
–55 to +110
5300
1
≥7
UL, BSI, FIMKO
TCDT1101
DIP-6
10 mA
TCDT1101
63
125
32
60
–55 to +110
5300
1
≥7
UL, BSI, FIMKO
TCDT1102
DIP-6
10 mA
TCDT1102
100
200
32
60
–55 to +110
5300
1
≥7
UL, BSI, FIMKO
TCDT1103
DIP-6
10 mA
TCDT1103
160
320
32
60
–55 to +110
5300
1
≥7
UL, BSI, FIMKO
TCDT1100G
DIP-6
10 mA
TCDT1100G
40
32
60
–55 to +110
5300
1
≥8
UL, BSI, FIMKO
TCDT1101G
DIP-6
10 mA
TCDT1101G
63
125
32
60
–55 to +110
5300
1
≥8
UL, BSI, FIMKO
TCDT1102G
DIP-6
10 mA
TCDT1102G
100
200
32
60
–55 to +110
5300
1
≥8
UL, BSI, FIMKO
>>>
Brochure Type
12/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
TCDT1103G
TCDT1120
TCDT1122
TCDT1123
TCDT1124
CNY117
CNY117F
SFH640
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
320
DIP-6
10 mA
TCDT1103G
160
DIP-6
10 mA
TCDT1120
40
DIP-6
10 mA
TCDT1120G
40
DIP-6
10 mA
TCDT1122
63
DIP-6
10 mA
TCDT1122G
63
DIP-6
10 mA
TCDT1123
DIP-6
10 mA
TCDT1123G
DIP-6
10 mA
DIP-6
DIP-6
32
Forward
Current
IF max.
(mA)
60
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Safety Standard(s)
–55 to +110
5300
1
≥8
UL, BSI, FIMKO
–55 to +100
5300
1
≥7
UL, BSI, VDE, FIMKO
60
–55 to +100
5300
1
≥8
UL, BSI, VDE, FIMKO
125
60
–55 to +100
5300
1
≥7
UL, BSI, VDE, FIMKO
125
60
–55 to +100
5300
1
≥8
UL, BSI, VDE, FIMKO
100
200
60
–55 to +100
5300
1
≥7
UL, BSI, VDE, FIMKO
100
200
60
–55 to +100
5300
1
≥8
UL, BSI, VDE, FIMKO
TCDT1124
160
320
60
–55 to +100
5300
1
≥7
UL, BSI, VDE, FIMKO
10 mA
TCDT1124G
160
320
60
–55 to +100
5300
1
≥8
UL, BSI, VDE, FIMKO
10 mA
CNY117-1
40
80
70
60
–55 to +110
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117-2
63
125
70
60
–55 to +110
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117-3
100
200
70
60
–55 to +110
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117-4
160
320
70
60
–55 to +110
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117F-1
40
80
70
60
–55 to +110
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117F-2
63
125
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117F-3
100
200
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
CNY117F-4
160
320
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, CQC
DIP-6
10 mA
SFH640-2
63
125
300
60
–55 to +100
5300
1
≥7
UL, VDE, cUL, BSI
SFH640-3
100
200
DIP-6
10 mA
300
60
–55 to +100
5300
1
≥7
UL, VDE, cUL, BSI
4N25
DIP-6
10 mA
20
70
60
–55 to +100
5000
1
≥7
UL, BSI, VDE, FIMKO
4N26
DIP-6
10 mA
20
70
60
–55 to +100
5000
1
≥7
UL, BSI, VDE, FIMKO
4N27
DIP-6
10 mA
10
70
60
–55 to +100
5000
1
≥7
UL, BSI, VDE, FIMKO
4N28
DIP-6
10 mA
10
70
60
–55 to +100
5000
1
≥7
UL, BSI, VDE, FIMKO
4N35
DIP-6
10 mA
100
70
60
–55 to +100
5300
1
≥7
UL, VDE
4N36
DIP-6
10 mA
100
70
60
–55 to +100
5300
1
≥7
UL, VDE
4N37
DIP-6
10 mA
100
70
60
–55 to +100
5300
1
≥7
UL, VDE
4N38
DIP-6
20 mA
20
70
60
–55 to +110
5300
1
≥7
UL, cUL, VDE, BSI, FIMKO,
CQC
4N35-X
DIP-6
10 mA
100
70
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
4N36-X
DIP-6
10 mA
100
70
60
–55 to +110
5300
1
≥7
UL, cUL, VDE, BSI, FIMKO,
CQC
4N37-X
DIP-6
10 mA
100
70
60
–55 to +110
5300
1
≥7
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-6
10 mA
CNY17-1
40
80
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-6
10 mA
CNY17-2
63
125
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-6
10 mA
CNY17-3
100
200
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
CNY17
>>>>
>>>
Brochure Type
13/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
CNY17
(cont)
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
DIP-6
10 mA
CNY17-4
160
320
70
60
–55 to +100
5000
1
≥7; ≥8
UL, cUL, VDE, BSI, FIMKO,
CQC
DIP-6
10 mA
CNY17.-1
40
80
70
60
–55 to +100
5000
1
≥7
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17.-2
63
125
70
60
–55 to +100
5000
1
≥7
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17.-3
100
200
70
60
–55 to +100
5000
1
≥7
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17.-4
160
320
70
60
–55 to +100
5000
1
≥7
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17G-1
40
80
70
60
–55 to +100
5000
1
≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17G-2
63
125
70
60
–55 to +100
5000
1
≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17G-3
100
200
70
60
–55 to +100
5000
1
≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17G-4
160
320
70
60
–55 to +100
5000
1
≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17F-1
40
80
70
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17F-2
63
125
70
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17F-3
100
200
70
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY17F-4
160
320
70
60
–55 to +110
5300
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
DIP-6
10 mA
CNY75A
63
125
70
60
–55 to +110
5000
1
≥7
DIP-6
10 mA
CNY75GA
63
125
70
–55 to +110
5000
1
≥8
DIP-6
10 mA
CNY74B
100
200
70
–55 to +110
5000
1
≥7
DIP-6
10 mA
CNY75GB
100
200
70
–55 to +110
5000
1
≥8
DIP-6
10 mA
CNY75C
160
320
70
–55 to +110
5000
1
≥7
DIP-6
10 mA
CNY75GC
160
320
70
–55 to +110
5000
1
≥8
DIP-6
10 mA
H11A1
50
70
60
–55 to +100
5300
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO
DIP-6
10 mA
H11A2
20
70
60
–55 to +100
5300
1
≥7
UL, cUL, BSI, VDE, FIMKO
DIP-6
10 mA
H11A3
20
70
60
–55 to +100
5300
1
≥7
UL, cUL, BSI, VDE, FIMKO
DIP-6
10 mA
H11A4
10
70
60
–55 to +100
5300
1
≥7
UL, cUL, BSI, VDE, FIMKO
DIP-6
10 mA
H11A5
30
70
60
–55 to +100
5300
1
≥7
UL, cUL, BSI, VDE, FIMKO
CNY17G
CNY17F
CNY75
H11A
Safety Standard(s)
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
>>>
Brochure Type
14/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Package
Forward
Current
IF
Part Number
CTR
min
(%)
DIP-6
10 mA
H11D1
20
300
60
–55 to +100
5300
1
≥7
DIP-6
10 mA
H11D2
20
300
60
–55 to +100
5300
1
≥7
DIP-6
10 mA
H11D3
20
200
60
–55 to +100
5300
1
≥7
DIP-6
10 mA
H11D4
20
200
60
–55 to +100
5300
1
≥7
IL1
DIP-6
10 mA
20
300
50
60
–40 to +100
5300
1
≥7
UL, cUL, BSI, VDE
IL2
DIP-6
10 mA
100
500
70
60
–40 to +100
5300
1
≥7
UL, cUL, BSI, VDE
IL5
DIP-6
10 mA
50
400
70
60
–40 to +100
5300
1
≥7
UL, cUL, BSI, VDE
IL202
DIP-6
10 mA
125
250
70
60
–55 to +100
5300
1
≥7
UL, cUL, BSI, FIMKO
IL203
DIP-6
10 mA
225
450
70
60
–55 to +100
5300
1
≥7
UL, cUL, BSI, FIMKO
4N25-X
DIP-6
10 mA
20
70
–55 to +100
5000
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
4N26-X
DIP-6
10 mA
20
70
–55 to +100
5000
1
≥7; ≥8
UL, cUL, BSI, VDE, FIMKO,
CQC
4N27-X
DIP-6
10 mA
10
70
–55 to +100
5000
1
≥7
UL, cUL, BSI, VDE, FIMKO,
CQC
4N28-X
DIP-6
10 mA
10
70
–55 to +100
5000
1
≥7
UL, cUL, BSI, VDE, FIMKO,
CQC
TCET2200
DIP-8
5 mA
50
600
70
60
–55 to +100
5300
2
≥7
UL, cUL, VDE, VDE, FIMKO
ILD1
DIP-8
10 mA
20
300
50
60
–55 to +100
5300
2
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
ILD1615
DIP-8
10 mA
160
320
70
60
–55 to +110
5300
2
≥7
UL, BSI, cUL, VDE
ILD2
DIP-8
10 mA
100
500
70
60
–55 to +100
5300
2
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
ILD5
DIP-8
10 mA
50
400
70
60
–55 to +100
5300
2
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
DIP-8
10 mA
ILD610-1
40
80
70
1.5
–55 to +100
5300
2
≥7
UL, BSI, cUL, VDE
DIP-8
10 mA
ILD610-2
63
125
70
1.5
–55 to +100
5300
2
≥7
UL, BSI, cUL, VDE
DIP-8
10 mA
ILD610-3
100
200
70
1.5
–55 to +100
5300
2
≥8
UL, BSI, cUL, VDE
DIP-8
10 mA
ILD610-4
160
320
70
1.5
–55 to +100
5300
2
≥7
UL, BSI, cUL, VDE
DIP-8
5 mA
ILD621
50
600
70
1.5
–55 to +100
5300
2
≥7; ≥8
UL, BSI, VDE, FIMKO
DIP-8
5 mA
ILD621GB
100
600
70
1.5
–55 to +100
5300
2
≥7; ≥8
UL, BSI, VDE, FIMKO
TCET2100
DIP-8
5 mA
50
600
70
60
–55 to +100
5300
2
≥7
UL, BSI, cUL, VDE, FIMKO
TCET2200
DIP-8
5 mA
50
600
70
60
–55 to +100
5300
2
≥7
UL, BSI, cUL, VDE, FIMKO
H11D
ILD1615-4
Safety Standard(s)
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
UL, cUL, BSI, VDE, FIMKO,
CQC
ILD610
ILD621
>>>
Brochure Type
15/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Package
Forward
Current
IF
Part Number
CTR
min
(%)
DIP-8
10 mA
ILD615-1
40
80
70
60
–55 to +100
5300
2
≥7; ≥8
UL, cUL, VDE, FIMKO
DIP-8
10 mA
ILD615-2
63
125
70
60
–55 to +100
5300
2
≥7; ≥8
UL, cUL, VDE, FIMKO
DIP-8
10 mA
ILD615-3
100
200
70
60
–55 to +100
5300
2
≥7; ≥8
UL, cUL, VDE, FIMKO
DIP-8
10 mA
ILD615-4
160
320
70
60
–55 to +100
5300
2
≥7; ≥8
UL, cUL, VDE, FIMKO
CNY74
DIP-8
5 mA
CNY74-2H
50
600
70
60
–55 to +100
5300
2
≥7
UL, cUL
ILD74
SMD-8
16 mA
12.5
70
60
–55 to +100
5300
2
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
ILD205
SOIC-8
10 mA
40
80
70
30
–55 to +100
4000
2
≥4
UL, cUL
ILD206
SOIC-8
10 mA
63
125
70
30
–55 to +100
4000
2
≥4
UL, cUL
ILD207
SOIC-8
10 mA
100
200
70
30
–55 to +100
4000
2
≥4
UL, cUL
ILD211
SOIC-8
10 mA
20
70
30
–55 to +100
4000
2
≥4
UL, cUL
ILD213
SOIC-8
10 mA
100
70
30
–55 to +100
4000
2
≥4
UL, cUL
ILD217
SOIC-8
1 mA
100
70
30
–55 to +100
4000
2
≥4
UL, cUL
VOD205
SOIC-8
10 mA
40
80
70
30
–40 to +100
4000
2
≥4
UL, cUL, VDE
VOD206
SOIC-8
10 mA
63
125
70
30
–40 to +100
4000
2
≥4
UL, cUL, VDE
VOD207
SOIC-8
10 mA
100
200
70
30
–40 to +100
4000
2
≥4
UL, cUL, VDE
VOD211
SOIC-8
10 mA
20
70
30
–40 to +100
4000
2
≥4
UL, cUL, VDE
VOD213
SOIC-8
10 mA
100
70
30
–40 to +100
4000
2
≥4
UL, cUL, VDE
VOD217
SOIC-8
1 mA
100
70
30
–40 to +100
4000
2
≥4
UL, cUL, VDE
IL1205A
SOIC-8
10 mA
40
80
70
60
–55 to +110
4000
1
≥4
UL, cUL, FIMKO
IL1206A
SOIC-8
10 mA
63
125
70
60
–55 to +110
4000
1
≥4
UL, cUL, FIMKO
IL1207A
SOIC-8
10 mA
100
200
70
60
–55 to +110
4000
1
≥4
UL, cUL, FIMKO
IL1208A
SOIC-8
10 mA
160
320
70
60
–55 to +110
4000
1
≥4
UL, cUL, FIMKO
IL205A
SOIC-8
10 mA
40
80
70
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL206A
SOIC-8
10 mA
63
125
70
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL207A
SOIC-8
10 mA
100
200
70
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL208A
SOIC-8
10 mA
160
320
70
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL211A
SOIC-8
10 mA
20
30
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL212A
SOIC-8
10 mA
50
30
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL213A
SOIC-8
10 mA
100
30
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL215A
SOIC-8
1 mA
20
30
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
Safety Standard(s)
ILD615
>>>
Brochure Type
16/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototransistor cont’d
Base
Part
Number
Forward
Package Current
IF
Part Number
CTR
min
(%)
CTR
VCEO
max
(V)
(%)
Forward
Current
IF max.
(mA)
Isolation
Operating
Creepage
Voltage
Temperature
Ch(s) distance
VISO
max. (°C)
(mm)
(VRMS)
Safety Standard(s)
IL216A
SOIC-8
1 mA
50
30
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
IL217A
SOIC-8
1 mA
100
30
60
–55 to +100
4000
1
≥4
UL, cUL, FIMKO
ILD1205T
SOIC-8
10 mA
40
80
–55 to +110
4000
2
≥4
UL, cUL, VDE
ILD1206T
SOIC-8
10 mA
63
125
–55 to +110
4000
2
≥4
UL, cUL, VDE
ILD1207T
SOIC-8
10 mA
100
200
–55 to +110
4000
2
≥4
UL, cUL, VDE
VO205A
SOIC-8
10 mA
40
80
70
60
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO206A
SOIC-8
10 mA
63
125
70
60
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO207A
SOIC-8
10 mA
100
200
70
60
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO208A
SOIC-8
10 mA
160
320
70
60
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO211A
SOIC-8
10 mA
20
30
1
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO212A
SOIC-8
10 mA
50
30
1
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO213A
SOIC-8
10 mA
100
30
1
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO215A
SOIC-8
1 mA
20
30
1
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO216A
SOIC-8
1 mA
50
30
1
–40 to +100
4000
1
≥4
UL, cUL, VDE
VO217A
SOIC-8
1 mA
100
30
1
–40 to +100
4000
1
≥4
UL, cUL, VDE
ILQ1
DIP-16
10 mA
20
300
50
60
–55 to +100
5300
4
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
ILQ1615
DIP-16
10 mA
160
320
70
60
–55 to +110
5300
4
≥7
UL, BSI, cUL, VDE
ILQ2
DIP-16
10 mA
100
500
70
60
–55 to +100
5300
4
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
ILQ5
DIP-16
10 mA
50
400
70
60
–55 to +100
5300
4
≥7; ≥8
UL, BSI, cUL, VDE, FIMKO
Brochure Type
ILD1615-4
17/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Optocouplers / Isolators - AC Input
SSOP-4
SOP-4
SOP-8
DIP-4
LSOP-4
DIP-6
DIP-8 (2-ch)
DIP-16 (4-ch)
AC Input
VISO
AC input
3750 VRMS
4000 VRMS
5300 VRMS
± 1 mA
VOS628A
-
-
-
VOL628A
-
-
-
± 5 mA
VOS627A
SFH691
ILD256 (2)
SFH620A,
SFH628A,
TCET1600
-
IL25x
ILD250,
ILD620
ILQ620
Features
Applications
• High CTR with low input current
• Telecommunication
• High collector emitter voltage V
• PLCs
• Isolation test voltage up to 5300 VRMS
• Industrial controls
• Low coupling capacitance
• Office machines
• High common mode transient immunity
Resources:
AC input
www.vishay.com/optocouplers/opto-ac-in/
Optocouplers / Isolators - AC Input
Base Part
number
K814P
Forward
Isolation
Operating
Current
Voltage
Temperature
Channels
IF max.
VISO
max. (°C)
(mA)
(VRMS)
CTR
min1
(%)
CTR
max1
(%)
VCEO
(V)
20
300
70
± 60
–40 to +100
5000
1
UL, CSA
SFH620AA
50
600
70
± 60
–55 to +100
5300
1
UL, CSA, BSI,
SFH620AGB
100
600
70
± 60
–55 to +100
5300
1
UL, CSA, BSI,
20
300
70
± 60
–55 to +100
5300
1
UL, CSA, VDE, VDE,
FIMKO
SFH620-1
40
125
70
± 60
–55 to +100
5300
1
UL, CSA, BSI, VDE
± 10 mA
SFH620-2
63
200
70
± 60
–55 to +100
5301
1
UL, CSA, BSI, VDE
DIP-4 /
SMD-4
± 10 mA
SFH620-3
100
320
70
± 60
–55 to +100
5302
1
UL, CSA, BSI, VDE
DIP-4 /
SMD-4
± 10 mA
SFH6206-1
40
125
70
± 60
–55 to +100
5300
1
UL, CSA, BSI, VDE
DIP-4 /
SMD-4
± 10 mA
SFH6206-2
63
200
70
± 60
–55 to +100
5300
1
UL, CSA, BSI, VDE
DIP-4 /
SMD-4
± 10 mA
SFH6206-3
100
320
70
± 60
–55 to +100
5300
1
UL, CSA, BSI, VDE
Package
IF
DIP-4
± 5 mA
DIP-4
± 5 mA
DIP-4
± 5 mA
DIP-4
± 5 mA
DIP-4 /
SMD-4
± 10 mA
DIP-4 /
SMD-4
Part number
Safety Standards
SFH620AA
TCET1600
SFH620A
SFH6206
Brochure Type
18/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Optocouplers / Isolators - AC Input cont’d
CTR
max1
(%)
VCEO
(V)
Forward
Isolation
Operating
Current
Voltage
Temperature
Channels
IF max.
VISO
max. (°C)
(mA)
(VRMS)
Package
IF
Part number
CTR
min1
(%)
DIP-4 /
SMD-4
± 1 mA
SFH628A-2
63
200
55
± 50
–55 to +100
5300
1
UL, VDE, BSI
DIP-4 /
SMD-4
± 1 mA
SFH628A-3
100
320
55
± 50
–55 to +100
5300
1
UL, VDE, BSI
DIP-4 /
SMD-4
± 1 mA
SFH628A-4
160
500
55
± 50
–55 to +100
5300
1
UL, VDE, BSI
DIP-4 /
SMD-4
± 1 mA
SFH6286-2
63
200
55
± 50
–55 to +100
5300
1
UL, VDE, BSI
DIP-4 /
SMD-4
± 1 mA
SFH6286-3
100
320
55
± 50
–55 to +100
5300
1
UL, VDE, BSI
DIP-4 /
SMD-4
± 1 mA
SFH6286-4
160
500
55
± 50
–55 to +100
5300
1
UL, VDE, BSI
SFH691A
SOP-4
± 5 mA
50
300
70
± 50
–55 to +100
3750
1
UL, cUL, FIMKO, VDE,
TCMT1600
SOP-4
± 5 mA
80
300
70
± 60
–40 to +100
3750
1
UL, cUL, VDE, FIMKO, BSI
SSOP-4
± 5 mA
VOS627A
50
600
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 5 mA
VOS627A-2
63
125
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 5 mA
VOS627A-3
100
200
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 5 mA
VOS627A-4
160
320
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 1mA
VOS628A
50
600
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 1mA
VOS628A-2
63
125
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 1mA
VOS628A-3
100
200
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
SSOP-4
± 1mA
VOS628A-4
160
320
80
50
–55 to +110
3750
1
UL, cUL, VDE, FIMKO,
CQC
LSOP-4
± 1mA
VOL628A
50
600
80
± 60
–55 to +110
5000
1
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
± 1mA
VOL628A-1
40
80
80
± 60
–55 to +110
5000
1
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
± 1mA
VOL628A-2
63
125
80
± 60
–55 to +110
5000
1
UL, cUL, VDE, BSI, FIMKO,
CQC
LSOP-4
± 1mA
VOL628A-3
100
200
80
± 60
–55 to +110
5000
1
UL, cUL, VDE, BSI, FIMKO,
CQC
60
60
5300
1
UL, BSI
Base Part
number
SFH628A
SFH6286
VOS627A
VOS628A
IL766B
DIP-6
H11AA1
DIP-6 /
SMD-6
± 10mA
DIP-6 /
SMD-6
± 10 mA
IL255
0.33
DIP-6 /
SMD-6
± 10 mA
IL255-2
0.33
IL255
Brochure Type
Safety Standards
30
± 60
–55 to +100
5300
1
UL, CSA, BSI, VDE,
FIMKO
3
30
130
–55 to +100
5300
1
UL, cUL, BSI
3
30
130
–55 to +100
5300
1
UL, cUL, BSI
20
19/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Optocouplers / Isolators - AC Input cont’d
Base Part
number
CTR
min1
(%)
CTR
max1
(%)
VCEO
(V)
Forward
Isolation
Operating
Current
Voltage
Temperature
Channels
IF max.
VISO
max. (°C)
(mA)
(VRMS)
Package
IF
K824P
DIP-8
± 5 mA
20
300
70
± 60
–40 to +100
5000
2
UL, CSA
TCET2600
DIP-8
± 5 mA
20
300
70
± 60
–55 to +100
5300
2
UL, CSA, VDE, FIMKO
DIP-8 /
SMD-8
± 5 mA
ILD620
50
600
70
± 60
–55 to +100
5300
2
UL, cUL, VDE, FIMKO,
CQC
DIP-8 /
SMD-8
± 5 mA
ILD620GB
100
600
70
± 60
–55 to +100
5300
2
UL, cUL, VDE, FIMKO,
CQC
IL256A
SOIC-8
± 10 mA
20
30
60
–55 to +100
4000
1
UL, CSA, VDE
ILD256T
SOIC-8
± 10 mA
20
70
30
–55 to +100
4000
2
UL, VDE
TCMT4600
SOP-16
± 5 mA
80
300
70
± 60
–40 to +100
3750
4
UL, cUL, VDE, FIMKO,
BSI
TCMT4606
SOP-16
± 5 mA
100
300
70
± 60
–40 to +100
3750
4
UL, cUL, VDE, FIMKO,
BSI
K844P
DIP-16
± 5 mA
20
300
70
± 60
–40 to +100
5000
4
UL, CSA
TCET4600
DIP-16
± 5 mA
20
300
70
± 60
–55 to +100
5300
4
UL, CSA, VDE, FIMKO
DIP-16 /
SMD-16
± 5 mA
ILQ620
50
600
70
± 60
–55 to +100
5300
4
UL, cUL, VDE, FIMKO,
CQC
DIP-16 /
SMD-16
± 5 mA
ILQ620GB
100
600
70
± 60
–55 to +100
5300
4
UL, cUL, VDE, FIMKO,
CQC
ILD620
ILQ620
Brochure Type
Part number
20/58
Safety Standards
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Darlington
SSOP-4
SSOP-16
(4-Ch)
SOIC-8
DIP-4
LSOP-4
DIP-6
DIP-8
(2-Ch)
DIP-16
(4-Ch)
ILD55
ILD66
K825P
TCED2100
ILQ30
ILQ31
ILQ55
ILQ66
K845P
TCED4100
Darlington
VISO
3750 VRMS
DC input
TCMD1000
TCMD4000
4000 VRMS
IL221/222/223
ILD223
(2-Ch)
VO221/222/223
VOD223
(2-Ch)
5300 VRMS
K815P
SFH655A
SFH619A
(HV)
TCLD1000
4N32
4N33
H11B
IL66
MCA231
AC input
IL766B
Features
• High CTR with low input current
• High collector emitter voltage V
• Isolation test voltage up to 5300 VRMS
• Certified to UL, CSA, VDE, Fimko, and CQC safety standards
• RoHS-compliant, lead (Pb)-free, and eco-friendly “green” compound
Applications
• Programmable logic controls
• Modems
• Office equipment
Brochure Type
21/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Darlington
Operating
Temperature
max. (°C)
Isolation
Voltage VISO
(VRMS)
Safety Standards
60
–40 to +100
5
UL, CSA, CQC
1000
60
–55 to +100
5300
UL, BSI, FIMKO
55
600
60
–55 to +100
5300
UL, VDE, VDE, BSI
SOP-4
35
600
60
–40 to +100
3750
UL, CSA, VDE, FIMKO, BSI
LSOP-4
35
600
60
–55 to +100
5000
UL, CSA, BSI, VDE
IL66
DIP-6 / SMD-6
60
100
60
–55 to +100
5300
UL, cUL, VDE, BSI
MCA231
DIP-6 / SMD-6
30
200
60
–55 to +100
5300
UL, CSA, BSI
4N32
DIP-6 / SMD-6
30
500
60
–55 to +100
5300
UL, VDE, BSI, FIMKO
4N33
DIP-6 / SMD-6
30
500
60
–55 to +100
5300
UL, VDE, BSI, FIMKO
IL66
DIP-8
60
100
60
–55 to +100
5300
UL, cUL, VDE, BSI
K825P
DIP-8
35
600
60
–40 to +100
5300
UL, CSA,
TCED2100
DIP-8
35
60
–40 to +100
5000
UL, BSI, CSA, Nordic
ILD66
DIP-8 / SMD-8
55
100
60
–55 to +100
5300
UL, cUL, VDE, BSI
ILD55
DIP-8 / SMD-8
55
100
60
–55 to +100
5300
UL, cUL, VDE, BSI, FIMKO
ILQ30
DIP-8 / SMD-8
30
100
60
–55 to +100
5300
UL, cUL, VDE, BSI, FIMKO
IL221A
SOIC-8
30
60
–55 to +100
4000
UL, CSA
IL222A
SOIC-8
30
60
–55 to +100
4000
UL, CSA
IL223A
SOIC-8
30
60
–55 to +100
4000
UL, CSA
ILD223
SOIC-8
30
–55 to +100
4000
UL, CSA, VDE
VO221A
SOIC-8
30
100
60
–40 to +100
4000
UL, cUL, VDE
VO222A
SOIC-8
30
100
60
–40 to +100
4000
UL, cUL, VDE
VO223A
SOIC-8
30
100
60
–40 to +100
4000
UL, cUL, VDE
VOD223
SOIC-8
30
500
30
–40 to +100
4000
UL, cUL, VDE
ILQ66
DIP-16
60
100
60
–55 to +100
5300
UL, cUL, VDE, BSI
ILQ32
DIP-16
30
500
60
–55 to +100
5300
UL, cUL, VDE, BSI
K845P
DIP-16
35
600
60
–40 to +100
5300
UL, CSA,
Part number
Forward
CTR min1 (%) Current IF max.
(mA)
Package
VCEO (V)
DIP-4
35
600
SFH619A
DIP-4 /SMD-4
300
SFH655A
DIP-4 /SMD-4
TCMD1000
TCLD1000
K815P
TCED4100
DIP-16
35
60
–40 to +100
5000
UL, BSI, CSA, Nordic
ILQ66
DIP-16 / SMD-16
60
100
60
–55 to +100
5300
UL, cUL, VDE, BSI
ILQ55
DIP-16 / SMD-16
55
100
60
–55 to +100
5300
UL, cUL, VDE, BSI, FIMKO
ILQ31
DIP-16 / SMD-16
30
100
60
–55 to +100
5300
UL, cUL, VDE, BSI, FIMKO
SOP-16
35
600
60
–40 to +100
3750
UL, CSA, VDE, FIMKO, BSI
TCMD4000
Brochure Type
22/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Linear Optocoupler
DIP-8 (2-ch)
Linear
K1
IL300
K2
Description
Linear optocouplers consist of an AlGaAs IRLED irradiating an
isolated feedback and an output PIN photodiode in a bifurcated
arrangement. The feedback photodiode captures a percentage
of the LED’s, flux and generates a control signal (IP1) that
can be used to servo the LED drive current. This technique
compensates for the LED’s non-linear time and temperature
characteristics.
The output PIN photodiode produces an output signal (IP2) that
is linearly related to the servo optical flux created by the LED.
Features
Applications
• Couples AC and DC signals
• Power supply feedback voltage/current
• 0.01 % servo linearity
• Medical sensor isolation
• High gain stability, ± 0.005 %/°C typically
• Audio signal interfacing
• Low input-output capacitance
• Isolated process control transducers
• Low power consumption, < 15 mW
• Digital telephone isolation
• Isolation test voltage, 5300 VRMS, 1 s
• Distance through insulation > 0.4 mm
Linear Opotocoupler
Part number
IL300
Brochure Type
Package
K3 Transfer Gain2
(%)
DIP-8 / SMD-8
0.557 to 1.618
Transfer
Gain1
Bandwidth, typ.
Linearity typ.
(kHz)
(± %)
0.25
200
23/58
Isolation
Voltage VISO
(VRMS)
Safety standards
5300
UL, VDE, VDE, BSI, FIMKO
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
High-Speed Optocouplers
Features
Applications
• JEDEC-compatible
• Industrial communication buses
• Reinforced insulation
• High-speed A/D and D/A converters
• High-voltage isolation
• Digital control and switch mode power supplies
• U
p to 30 kV/μs common mode transient
immunity
• Industrial controller I/O interfaces
• Isolation test voltages up to 5300 VRMS
• Scan driver IC interfaces for high output voltage devices (plasma display
panels)
• Signal isolation transformer replacement
• AC motor drives
• IPM drivers
Resources
• Analog
www.vishay.com/optocouplers/opto-high-analog/
• Digital
www.vishay.com/optocouplers/opto-high-digital/
High-Speed Optocouplers (Analog)
Isolation
Voltage
VISO
(VRMS)
Ch(s)
Creepage
distance
(mm)
Safety
Standard(s)
-55 to + 110
5300
1
>7, >8
UL, VDE, cUL
1000
-55 to + 110
5300
1
>7, >8
UL, VDE, cUL
0.2
1000
-55 to + 100
5300
1
>7
UL, VDE, cUL
0.2
0.2
1000
-55 to + 100
5300
1
>7, >8
UL, VDE, cUL
300
1
0.6
500
-55 to + 100
5300
1
>7
UL, VDE, cUL
0.1
500
1
0.6
500
-55 to + 100
5300
1
>7
UL, VDE, cUL
DIP-8; DIP-8,
400 mil; SMD-8
1
7
0.2
0.2
1000
-55 to + 100
5300
1
>7, >8
UL, VDE, cUL
SFH6136
DIP-8; DIP-8,
400 mil; SMD-8
1
19
0.2
0.2
1000
-55 to + 100
5300
1
>7, >8
UL, VDE, cUL
SFH6138
DIP-8
0.1
300
1
0.6
500
-55 to + 100
5300
1
>7
UL, VDE
SFH6139
DIP-8; DIP-8,
400 mil; SMD-8
0.1
500
1
0.6
500
-55 to + 100
5300
1
>7, >8
UL, VDE
SFH6315
SOIC-8
1
7
0.5
0.25
1000
-55 to + 100
4000
1
>4
UL, VDE, cUL
Part
number
Package
Data
Rate
(MBd)
Operating
CTRmin tPLH typ. tPHL typ. CMTI typ
Temperature
(%)
(µs)
(µs)
(V/µsec)
(°C)
6N1135
DIP-8; DIP-8,
400 mil; SMD-8
1
7
0.2
0.2
1000
6N1136
DIP-8; DIP-8,
400 mil; SMD-8
1
19
0.2
0.2
6N135
DIP-8; SMD-8
1
7
0.2
6N136
DIP-8; DIP-8,
400 mil; SMD-8
1
19
6N138
DIP-8; SMD-8
0.1
6N139
DIP-8; SMD-8
SFH6135
>>>
Brochure Type
24/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
High-Speed Optocouplers (Analog) cont’d
Isolation
Voltage
VISO
(VRMS)
Ch(s)
Creepage
distance
(mm)
Safety
Standard(s)
-55 to + 100
4000
1
>4
UL, VDE, cUL
1000
-55 to + 100
4000
1
>4
UL, VDE, cUL
1.5
1000
-55 to + 100
4000
1
>4
UL, VDE, cUL
0.6
1.5
1000
-55 to + 100
4000
1
>4
UL, VDE, cUL
7
0.5
0.25
150001
-55 to + 100
5300
2
>7
UL, VDE, cUL
1
19
0.5
0.25
150001
-55 to + 100
5300
2
>7, >8
UL, VDE, cUL
SOIC-8
1
19
0.5
0.25
150001
-55 to + 100
4000
1
>4
UL, VDE, cUL
SFH6345
DIP-8; DIP-8,
400 mil; SMD-8
1
19
0.3
0.3
150001
-55 to + 100
5300
1
>7, >8
UL, VDE
SFH636
DIP-6; DIP-6,
400 mil; SMD-6
1
19
0.3
0.3
100001
-55 to + 100
5300
1
>7, >8
VOM452
SOP-4, 100 mil
1
15
0.2
0.5
10001
-55 to + 100
3750
1
>5
UL, VDE
VOM453
SOP-4, 100 mil
1
15
0.2
0.5
150001
-55 to + 100
3750
1
>5
UL, VDE
VOW135
DIP-8, 400mil
Wide Body
1
7
1.3
0.2
10001
-40 to + 100
5300
1
>10
UL, VDE, cUL,
CQC
VOW136
DIP-8, 400mil
Wide Body
1
19
6
0.2
10001
-40 to + 100
5300
1
>10
UL, VDE, cUL,
CQC
Part
number
Package
Data
Rate
(MBd)
SFH6316
SOIC-8
1
19
0.5
0.25
1000
SFH6318
SOIC-8
0.1
300
2
2
SFH6319
SOIC-8
0.1
500
0.6
SFH6319
SOIC-8
0.1
500
SFH6325
DIP-8; SMD-8
1
SFH6326
DIP-8; DIP-8,
400 mil; SMD-8
SFH6343
Note:
1
Operating
CTRmin tPLH typ. tPHL typ. CMTI typ
Temperature
(%)
(µs)
(µs)
(V/µsec)
(°C)
= minimum value
Brochure Type
25/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
High-Speed Optocouplers (Digital)
tPHL Pulse Width CMTI
CMTI
Operating
Isolation
typ
min
typ.
Distortion
Temperature Voltage VISO Ch(s)
(ns)
PWD (ns) (V/µsec) (V/µsec)
(°C)
(VRMS)
Part number
Package
Data
Rate
(MBd)
tPLH
typ.
(ns)
Creepage
Distance
(mm)\
Safety
Standards
6N137
DIP-8; DIP-8,
400mil, SMD-8
10
48
50
2.9
25000
-40 to + 100
1
>7, >8
UL, VDE,
cUL
6N137A
DIP-8; SMD-8
10
45
32
2.9
25000
-40 to + 100
1
>7
UL, VDE,
cUL
SFH6700
DIP-8; SMD-8
5
120
125
1000
-40 to + 85
SFH6701
DIP-8; SMD-8
5
120
125
1000
-40 to + 85
5300
1
>7
UL, VDE
5300
1
>7
SFH6702
DIP-8; DIP-8,
400mil, SMD-8
UL, VDE
5
120
125
1000
-40 to + 85
5300
1
>7, >8
UL, VDE
SFH6705
DIP-8; DIP-8,
400mil, SMD-8
5
120
125
1000
-40 to + 85
5300
1
>7, >8
UL, VDE
SFH6711
DIP-8; SMD-8
5
120
125
2500
-40 to + 85
5300
1
>7
UL, VDE
SFH6712
DIP-8; SMD-8
5
SFH6719
DIP-8
5
120
125
2500
-40 to + 85
5300
1
>7
UL, VDE
120
125
2500
-40 to + 85
5300
1
>7
SFH6720
SOIC-8
UL, VDE
5
120
125
1000
-40 to + 85
4000
1
>4
UL, VDE
SFH6721
SFH6731
SOIC-8
5
120
125
2500
-40 to + 85
4000
1
>4
UL, VDE
DIP-8; SMD-8
5
120
125
1000
-40 to + 85
5300
2
>7
SFH6732
UL, VDE
DIP-8; SMD-8
5
120
125
5000
-40 to + 85
5300
2
>7
UL, VDE
SFH6755
SOIC-8
10
48
50
2.9
-40 to + 100
4000
2
SFH6756
SOIC-8
10
48
50
2.9
5000
-40 to + 100
4000
2
SFH6757
SOIC-8
10
48
50
2.9
10000
-40 to + 100
4000
2
VO0600
SOIC-8
10
48
50
2.9
1000
-40 to + 100
4000
1
UL, VDE,
cUL
VO0601
SOIC-8
10
48
50
2.9
5000
-40 to + 100
4000
1
UL, VDE,
cUL
VO0611
SOIC-8
10
48
50
2.9
10000
-40 to + 100
4000
1
UL, VDE,
cUL
vo0630
SOIC-8
10
48
50
2.9
1000
-40 to + 100
4000
2
>4
UL, VDE,
cUL
vo0631
SOIC-8
10
48
50
2.9
5000
-40 to + 100
4000
2
>4
UL, VDE,
cUL
vo0661
SOIC-8
10
48
50
2.9
10000
-40 to + 100
4000
2
>4
UL, VDE,
cUL
VO2601
DIP-8; DIP-8,
400mil, SMD-8
10
48
50
2.9
5000
-40 to + 100
5300
1
>7, >8
UL, VDE,
cUL
VO2611
DIP-8; DIP-8,
400mil, SMD-8
10
48
50
2.9
10000
-40 to + 100
5300
1
>7, >8
UL, VDE,
cUL
VO2630
DIP-8; DIP-8,
400mil, SMD-8
10
48
50
2.9
1000
-40 to + 100
5300
2
>7, >8
UL, VDE,
cUL
VO2631
DIP-8; DIP-8,
400mil, SMD-8
10
48
50
2.9
5000
-40 to + 100
5300
2
>7, >8
UL, VDE,
cUL
VO4661
DIP-8; DIP-8,
400mil, SMD-8
10
48
50
2.9
10000
-40 to + 100
5300
2
>7, >8
UL, VDE,
cUL
VOW137
DIP-8, 400mil
Wide Body
10
49
46
3.1
10000
-40 to + 100
5300
1
>10
UL, VDE,
cUL, CQC
VOW2611
DIP-8, 400mil
Wide Body
10
49
46
3.1
20000
-40 to + 100
5300
1
>10
UL, VDE,
cUL, CQC
Brochure Type
10000
26/58
5300
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Phototriacs
DIP-6 / SMD-6
SOP-4
DIP-16
DIP-8 (6)
Phototriac
Min/ Dv/dt
Zero
Crossing
10 000 V/µs
5000 V/µs
≤ 1500 V/µs
≤ 1500 V/µs
500 V/µs
10 V/µs
400 V
BRT21
VO4154
-
-
-
-
600 V
IL410
IL4116
IL4117 (700 V)
VO4156
VO3062
VO3063
VO4157
(700 V)
VO3062
VO3063
-
VO2223
VO2223A
-
800 V
IL4108
IL4118
VO4158
-
-
-
-
250 V
-
-
K3010
K3011
K3012
K3013
-
-
-
-
-
-
ZCC*
*Zero crossing circuit
Non-Zero
Crossing
400 V
BRT11
VO4254
VO3020
VO3021
VO3022
VO3023
K3020
K3022
K3023
600 V
IL420
IL4216
IL4217 (700 V)
VO4256
VO4257 (700 V)
VO3252
VO3253
VOM3052
VOM3053
VOM160
VO3526
-
800 V
IL4208
IL4218
VO4258
-
-
-
-
Features
Applications
• Zero crossing or non-zero crossing
• AC Solid-state relays
• dV/dt range: 10 kV/μs, 5 kV/μs, 1.5 kV/μs, 0.5
kV/μs, 10 V/μs
• Lighting controls
• VDRM range: 250 V, 400 V, 600 V, 700 V, 800 V
Isolation test voltage up to 5300 VRMS
• Utilities metering over AC lines
• Worldwide safety agency certifications: UL,
cUL, CSA, CQC, VDE, DIN EN (60747-5-5),
FIMKO
• Temperature controls
• AC motor starters and drives
• Solenoid/valve controls
• Electromechanical contactors
• DIP, SMD, SOP with leadbend options available
Resources
• www.vishay.com/optocouplers/opto-triac/
Brochure Type
27/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Package
Trigger
Current IFT
(mA) MAX.
Blocking
Voltage VDRM
(V)
Static
dv / dt
(V/μ s)
On–state
Current
(mA)
Commutating
dv / dt
(V/μ s) TYP.
Operating
Temperature
(°C)
Isolation
Voltage VISO
VRMS
Non-Zero Crossing Phototriacs
Ch(s)
K3012P
Non–Zero
DIP–6
5
250
10
100
0.2
–55 to +100
5300
1
≥7
UL, BSI, VDE
K3012PG
Non–Zero
DIP–6
5
250
10
100
0.2
–55 to +100
5300
1
≥8
UL, BSI, VDE
K3011P
Non–Zero
DIP–6
10
250
10
100
0.2
–55 to +100
5300
1
≥7
UL, BSI, VDE
K3011PG
Non–Zero
DIP–6
10
250
10
100
0.2
–55 to +100
5300
1
≥8
UL, BSI, VDE
K3010P
Non–Zero
DIP–6
15
250
10
100
0.2
–55 to +100
5300
1
≥7
UL, BSI, VDE
K3010PG
Non–Zero
DIP–6
15
250
10
100
0.2
–55 to +100
5300
1
≥8
UL, BSI, VDE
K3036P
Non–Zero
DIP–6
3.6
400
10
100
0.15
–55 to +100
5300
1
≥7
UL, CSA, VDE, BSI
K3036PG
Non–Zero
DIP–6
3.6
400
10
100
0.15
–55 to +100
5300
1
≥8
UL, CSA, VDE, BSI
Part
number
Zero or
Non–zero
crossing
Creepage
distance
(mm)
Safety standard
K3023P
Non–Zero
DIP–6
5
400
10
100
0.15
–55 to +100
5300
1
≥7
UL, CSA, VDE, BSI
K3023PG
Non–Zero
DIP–6
5
400
10
100
0.15
–55 to +100
5300
1
≥8
UL, CSA, VDE, BSI
VO3023
Non–Zero
DIP–6
5
400
100
1
–40 to +100
5000
1
≥7; ≥8
UL, cUL, VDE,
FIMKO, CQC
K3022P
Non–Zero
DIP–6
10
400
10
100
0.15
–55 to +100
5300
1
≥7
UL, CSA, VDE, BSI
K3022PG
Non–Zero
DIP–6
10
400
10
100
0.15
–55 to +100
5300
1
≥8
UL, CSA, VDE, BSI
VO3022
Non–Zero
DIP–6
10
400
100
1
–40 to +100
5000
1
≥7; ≥8
UL, cUL, VDE,
FIMKO, CQC
K3021P
Non–Zero
DIP–6
15
400
10
100
0.15
–55 to +100
5300
1
≥7
UL, CSA, VDE, BSI
K3021PG
Non–Zero
DIP–6
15
400
10
100
0.15
–55 to +100
5300
1
≥8
UL, CSA, VDE, BSI
VO3021
Non–Zero
DIP–6
15
400
100
1
–40 to +100
5000
1
≥7;
≥8
UL, cUL, VDE,
FIMKO, CQC
K3020P
Non–Zero
DIP–6
30
400
10
100
0.15
–55 to +100
5300
1
≥7
UL, CSA, VDE, BSI
K3020PG
Non–Zero
DIP–6
30
400
10
100
0.15
–55 to +100
5300
1
≥8
UL, CSA, VDE, BSI
VO3020
Non–Zero
DIP–6
30
400
100
1
–40 to +100
5000
1
≥7;
≥8
UL, cUL, VDE,
FIMKO, CQC
VO4254D
Non–Zero
DIP–6
1.6
400
5000
300
–55 to +100
5300
1
≥7;
≥8
UL, cUL, VDE,
FIMKO
VO4256D
Non–Zero
DIP–6
1.6
600
5000
300
–55 to +100
5300
1
≥7;
≥8
UL, cUL, VDE,
FIMKO
IL420
Non–Zero
DIP–6
2
600
10000
300
–55 to +100
5300
1
≥7; ≥8
UL, CSA, VDE, CQC
VO4254H
Non–Zero
DIP–6
2
400
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4256H
Non–Zero
DIP–6
2
600
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4254M
Non–Zero
DIP–6
3
400
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4256M
Non–Zero
DIP–6
3
600
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO3052
Non–Zero
DIP–6
5
600
1500
100
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO3053
Non–Zero
DIP–6
10
600
1500
100
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
IL4216
Non–Zero
DIP–6
1.3
600
10000
300
8
–55 to +100
5300
1
≥7; ≥8
UL, CSA, VDE, BSI,
FIMKO
IL4217
Non–Zero
DIP–6
1.3
700
10000
300
8
–55 to +100
5300
1
≥7
UL, CSA, VDE, BSI,
FIMKO
Brochure Type
8
28/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Blocking
Voltage VDRM
(V)
Static
dv / dt
(V/μ s)
On–state
Current
(mA)
1.6
700
5000
300
800
5000
300
–55 to +100
2
800
10000
300
DIP–6
2
700
5000
DIP–6
2
800
5000
Non–Zero
DIP–6
3
700
Non–Zero
DIP–6
3
800
IL4218
Non–Zero
DIP–6
1.3
VOM160N
Non–Zero
SOP–4
VOM160P
Non–Zero
SOP–4
VOM160R
Non–Zero
SOP–4
VOM3052
Non–Zero
VOM3053
Non–Zero
VO2223
Non–Zero
VO2223A
VO3526
Isolation
Voltage VISO
VRMS
Ch(s)
Creepage
distance
(mm)
Safety standard
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
5300
1
≥7; ≥8
UL, cUL, VDE
–55 to +100
5300
1
≥7
UL, CSA, VDE, CQC
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
800
10000
300
8
–55 to +100
5300
1
≥7; ≥8
UL, CSA, VDE, BSI,
FIMKO
5
600
500
70
0.13
–40 to +100
3750
1
≥5
UL, cUL, CQC
7
600
500
70
0.13
–40 to +100
3750
1
≥5
UL, cUL, CQC
10
600
500
70
0.13
–40 to +100
3750
1
≥5
UL, cUL, CQC
SOP–4
5
600
1500
70
0.13
–40 to +100
3750
1
≥5
UL, cUL, CQC
SOP–4
10
600
1500
70
0.13
–40 to +100
3750
1
≥5
UL, cUL, CQC
DIP–6
10
600
1
0.7
–40 to +85
5300
1
≥7
UL, cUL
Non–Zero
DIP–6
10
600
1
0.7
–40 to +85
5300
1
≥7
UL, cUL
Non–Zero
DIP–10
10
600
1
0.9
–40 to +85
5300
1
≥7
UL, cUL
Part
number
Zero or
Non–zero
crossing
Package
Operating
Temperature
(°C)
Commutating
dv / dt
(V/μ s) TYP.
Trigger
Current IFT
(mA) MAX.
Non-Zero Crossing Phototriacs cont’d
VO4257D
Non–Zero
DIP–6
VO4258D
Non–Zero
DIP–6
1.6
IL4208
Non–Zero
DIP–6
VO4257H
Non–Zero
VO4258H
Non–Zero
VO4257M
VO4258M
Brochure Type
8
29/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Blocking
Voltage VDRM
(V)
Static dv / dt
(V/μ s)
On–state
Current (mA)
Operating
Temperature
(°C)
Isolation
Voltage VISO
VRMS
VO3062
Zero
DIP–6
5
600
1500
100
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO3063
Zero
DIP–6
10
600
1500
100
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO4154D
Zero
DIP–6
1.6
400
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO4156D
Zero
DIP–6
1.6
600
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO4154H
Zero
DIP–6
2
400
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO4156H
Zero
DIP–6
2
600
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO4154M
Zero
DIP–6
3
400
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
VO4156M
Zero
DIP–6
3
600
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE
IL4116
Zero
DIP–6
1.3
600
10000
300
8
–55 to +100
5300
1
≥7; ≥8
UL, CSA, BSI, VDE,
FIMKO
Part
number
Zero or
Non–zero Package
crossing
Commutating
dv / dt
(V/μ s) TYP.
Trigger
Current IFT
(mA) MAX.
Zero Crossing Phototriacs
Creepage
Ch(s) distance
(mm)
Safety
standard
IL410
Zero
DIP–6
2 to +6
600
10000
300
8
–55 to +100
5300
1
≥7; ≥8
UL, CSA, VDE
IL4117
Zero
DIP–6
1.3
700
10000
300
8
–55 to +100
5300
1
≥7; ≥8
UL, CSA, BSI, VDE,
FIMKO
VO4157D
Zero
DIP–6
1.6
800
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4158D
Zero
DIP–6
1.6
800
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4157H
Zero
DIP–6
2
800
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4158H
Zero
DIP–6
2
800
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4157M
Zero
DIP–6
3
800
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
VO4158M
Zero
DIP–6
3
800
5000
300
–55 to +100
5300
1
≥7; ≥8
UL, cUL, VDE,
FIMKO
IL4118
Zero
DIP–6
1.3
800
10000
300
8
–55 to +100
5300
1
≥7
UL, CSA, BSI, VDE,
FIMKO
IL4108
Zero
DIP–6
2 to +6
800
10000
300
8
–55 to +100
5300
1
≥7; ≥8
UL, CSA, VDE
Brochure Type
30/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Solid-State Relays
SSOP-8
SOP-8
SOP-4
DIP-6
DIP-8
(1-Ch)
DIP-8
(2-Ch)
Off state
voltage
2500 VRMS
3000 VRMS
3750 VRMS
60 V
-
-
VO1400AEFTR
VO14642A
-
-
200 V
-
-
-
LH1510A
-
LH1522A
LH1544A
250 V
-
-
-
LH1518A
-
LH1505A
350 V
LH1540ACD
LH1532
LH1529
LH1546AEF
LH1500A
LH1546A
LH1550A
LH1529A
(with Optocoupler)
400 V
-
-
-
LH1525A
-
LH1526A
200 V
-
-
-
LH1511B
-
LH1523B
350 V
-
-
-
LH1501B
-
LH1521B
200 V
-
-
-
-
LH1512B
-
350 V
-
-
-
-
LH1502B
-
200 V
-
-
-
-
LH1513A
-
350 V
-
-
-
-
LH1503A
-
-
-
VOM1271
-
LH1262C VO1263A
-
Solid State Relays (SSRs)
VISO
Types
1 Form A
1 Form A/B, C
2 Form A
MOSFET Driver
5300 VRMS
Introduction
Features
Vishay’s solid-state relays (SSRs) deliver fast
switching while optically isolating and protecting
equipment from damaging external high-voltage
spikes. By eliminating the majority of wire
bonds found in other SSRs, Vishay’s monolithic
structure has set the performance standard.With
no moving parts, our SSRs relays are noiseless,
bounce-free, and reliable, commonly replacing
electromechanical relays. Used in industrial,
automotive, and communication applications, all
of our SSRs feature low power consumption, small
packaging, and low turn-on current. Exceeding
industry standards, they are approved by VDE, UL,
CSA and other safety regulatory agencies.
• Reliable, long life, no noise, contact bounce or arcing
LH1520A
LH1532A
LH1533A
LH1556A
• Low power consumption at 75 % lower than EMR
• Low capacitance SSRs (3.5 pF)
• High-frequency SSRs (< 50 mhz)
Applications
• Telecom switches
• ATE test equipment
• Alarm control systems
Resources
• Datasheets:
www.vishay.com/solid-state-relays/
• SSR application notes:
www.vishay.com/solid-state-relays/related/#appnot
Brochure Type
31/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
LH1500
Current Limit (mA),
Typ. at 25 °C, IF = 5
mA -AC/DC
ton
SOP-4
350
120
—
35
—
—
3
DIP-4
60
100
—
5
—
—
0.5
0.5
5300
1
DIP-6
200
200
350
15
3.75
360
2.0*
2.0*
5300
1
DIP-6
250
155
300
20
5
28010
3
3
5300
1
toff
Isolation Voltage
VISO VRMS
On-Resistance
Max. at 25 °C (Ω)
-DC
LH1518
On-Resistance
Max. at 25 °C (Ω)
-AC/DC
LH15109
Load Current Max.
Recommended
(mA) -DC
VO1400AEFTR
Load Current Max.
Recommended
(mA) - AC/DC
LH1546AEF
Type
Load Voltage Max
(V)
Part number
Package
Solid-State Relays
CH(s)
3
5300
1
DIP-6
350
150
250
25
6.25
270
2
2
5300
1
LH1540
DIP-6
350
120
250
25
6.25
210
2
2
5300
1
LH1546A
DIP-6
350
120
200
3
3
5300
1
1 Form A 35
LH15501
DIP-6
350
100
—
50
—
200
3
3
5300
1
VO14642
DIP-6
60
1000
2000
0.25
0.07
—
0.8*
0.8*
5300
1
LH1513
DIP-8
200
140
—
15
—
360
2.5*
2.5*
5300
1
LH1503
2 Form A
DIP-8
350
110
—
25
—
270
2.5*
2.5*
5300
1
LH1522
DIP-8
200
140
—
15
—
360
2.0*
2.0*
5300
2
LH15441
DIP-8
200
40
—
160
—
—
0.5
0.5
5300
2
LH1505
DIP-8
250
120
—
20
—
200
4
4
5300
2
LH1520
DIP-8
350
110
—
25
—
270
2
2
5300
2
DIP-8
400
100
—
36
—
210
1
1.5
5300
2
LH15325
DIP-8
350
110
—
25
—
210
2
2.5
5300
2
LH1533
DIP-8
350
70
—
50
—
200
3
3
5300
2
LH15565
DIP-8
350
120
—
35
—
210
3
3
5300
2
DIP-6
200
200
300
15
3.75
—
3.0*
3.0*
5300
1
DIP-6
350
150
200
25
6.25
—
3
3
5300
1
LH1521
DIP-8
350
110
—
25
—
—
3
3
5300
2
LH1523
DIP-8
200
140
—
15
—
—
3.0*
3.0*
5300
2
DIP-8
350
150
—
25
—
290
6.0*
3.0*
5300
2
LH1526
1 Form A
LH1511
LH1501
LH15022
1 Form B
1 Form A
LH1512
1 Form A,
B/C
DIP-8
200
200
—
15
—
360
3.0*
3.0*
5300
1
LH15295,6,7
1 Form A w/
Optocoupler
DIP-8
350
120
—
25
—
210
2.5
2.5
5300
1
LH15398
1 Form A w/
Darlington
DIP-8
400
120
—
33
—
210
2
0.5
5300
1
15
—
14 µA*
—
—
—
35
µs**
90 µs**
5300
1
15
—
23 µA*
—
—
—
26
µs**
73 µs**
5300
1
53 µs
24 µs
3750
1
LH1262
VO1263
MOSFET
Driver
VOM1271
DIP-8
SOP-4
Notes:
* IF = 10 mA
** IF = 20 mA
1. Low capacitance SSR (3.5 pF)
2. Break-before-make operation
3. High-frequency SSR (< 50 MHz)
4. Current through both poles operating
Brochure Type
simultaneously. Load current for individual pole
ratios is higher
5. Surface mount Flat-Pack available
6. Current transfer ratio min. 33 %
7. Current transfer ratio min. 100 %
8. Current transfer ratio > 300 %
32/58
9. DC current limit 720 mA
10. AC Only
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
IGBT and MOSFET Drivers
Introduction
Optically isolated IGBT drivers are used to isolate the high-voltage stage of an DC/AC inverter from the low-voltage control
circuitry. This high voltage must be isolated from the user accessible low-voltage circuitry. Optically isolated IGBT drivers also
allow the designers to separate low-noise control circuitry from noisy high-voltage and high-current circuitry, which improves
performance, shrinks product size, and simplifies the design process.
Features
Applications
• Wide operating voltages available
• Isolated IGBT/MOSFET gate driver
• High operating temperature
• AC and brushless DC motor drives
• B
road range of surface-mount and
through-hole package types
• Induction stove tops
• Single and dual channel products
• Switch mode power supplies (SMPS)
• Low on resistance
• Uninterruptible power supplies (UPS)
• Industrial inverters
Resources
• Datasheets:
www.vishay.com/optocouplers/opto-driver/
VO1263
DIP-8
15
—
23 µA
—
—
—
26 µs 73 µs
VO3120
DIP-8
53 µs 24 µs 0.1
0.4
0.2
VO3150A
DIP-8
0.1
0.4
0.2
VOM1271
SOP-4
VOW3120 Widebody
Brochure Type
-40 to 85 5300
0.1
33/58
0.5
0.3
Safety Standards
35 µs 90 µs
Channel(s)
—
Isolation Voltage VISO
(VRMS)
Current Limit (mA),
Typ. at 25 °C, IF = 5 mA
-AC/DC
—
Operating Temperature
(°C)
On-Resistance Max. at
25 °C (Ω) -DC
—
CMTI typ (V/msec)
On-Resistance Max. at
25 °C (Ω) -AC/DC
14 µA
Pulse Width Distortion
PWD (ns)
Load Current Max.
Recommended (mA)
-DC
—
tPLH Max (ns)
Load Current Max.
Recommended (mA) AC/DC
15
tPLH Min (ns)
Load Voltage Max (V)
DIP-8
toff
Package
LH1262
ton
Base Part number
• IGBT/MOSFET application notes:
www.vishay.com/optocouplers/opto-driver/related/#appnot
1
UL,cUL, VDE, BSI,
FIMKO
-40 to
100
5300
1
UL,cUL, VDE, BSI,
FIMKO, CQC
25
-40 to
110
5300
1
UL, cUL, VDE
25
-40 to
110
5300
1
UL, cUL, VDE
-40 to
100
4500
1
UL, cUL, FIMKO
-40 to
100
5300
1 UL, cUL, VDE, CQC
25
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Part Number Coding
Option Information
Optocoupler lead-bend configurations are available as options. In addition, partial discharge testing as per VDE/IEC is also
available as an option.
See the order information section in the data-sheet to determine if and which options are available to a specific product.
Contact the Vishay sales office for other option configurations. The options are:
• Option 1: VDE option. Tested per DIN EN 60747-5-5 (VDE 0884-5)
• Option 6: 400 mil (10.16 mm) lead spread DIP configuration
–– Lead spacing 10.16 mm (0.4”)
–– Creepage distance > 8 mm
–– Clearance > 8 mm
• Option 7: Surface-mount, gull-wing DIP configuration with standoff
–– Creepage distance > 8 mm
–– Clearance > 8 mm
• Option 8: Surface-mount, gull-wing DIP configuration with increased clearance
–– Creepage distance > 8 mm
–– Clearance > 8 mm
• Option 9: Surface-mount, gull-wing DIP configuration
-X008
-X009
Ordering Information
A specific option or combination of options can be ordered by add the options definition field following
the base part number and CTR range (if applicable) as presented in the following example:
Optocouplers
V
O
L
Prefix
VO
VOM
VOS
VOL
BRT
II
ILD
ILQ
SFH
Examples:
CNY17F-2X017T
4N35-X016
SFH615-3X001
VO615A-9X007T
Brochure Type
Solid-State Relays (SSRs)
6
1
7
A
Base Part Number
-
3
X
CTR Ranges
0
0
Options Definition
1 = 40 % to 80 %
2 = 63 % to 125 %
3 = 100 % to 200 %
4 = 160 % to 320 %
5 = 250 % to 500 %
or 50 % to 150 % (1)
6 = 100 % to 300 % (1)
7 = 80 % to 160 % (1)
8 = 130 % to 260 % (1)
9 = 200 % to 400 % (1)
9
T
Tape and
Reel Option
Note
(1) Used on selected products, consult data sheet for details
34/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
CTR Options
To increase design flexibility, Vishay provides ten CTR values over a wide range from 40 % to 600 %. Please go to
datasheets to see detailed information.
Brochure Type
35/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Assembly
Instructions
Complete
Product
Por tfolio
Vishay
Semiconductors
Assembly Instructions
Assembly Instructions
GENERAL
Vishay offers a wide product selection of optocouplers and
solid- state relays in a variety of packages. This document
provides instructions on mounting for the different types of
packages, specifically on the different methods of soldering.
For DIP packages, they can be mounted in DIP sockets or
directly on a pre-designed PCB with holes.
The preferred solder process for SMD packages is reflow
soldering. Certain SMD families are also qualified for wave
soldering; please see table 1. The moisture sensitivity level
(MSL) = 1 for all couplers.
If the device is to be mounted near heat-generating
components, consideration must be given to the resultant
increase in ambient temperature.
SOLDERING INSTRUCTIONS
Protection against overheating is essential when a device is
being soldered. Therefore, the connection wires or PCB
traces should be left as long as possible. The maximum
permissible soldering temperature is governed by the
maximum permissible heat that may be applied to the
package.
The maximum soldering iron (or solder bath) temperatures
are given in the individual datasheets. During soldering, no
forces must be transmitted from the pins to the case (e.g., by
spreading the pins).
SOLDERING METHODS
There are several methods for soldering devices onto the
substrate. The following is a partial list.
(a)
Soldering in the vapor phase
Soldering in saturated vapor is also known as condensation
soldering. This soldering process is used as a batch system
(dual vapor system) or as a continuous single vapor system.
Both systems may also include a pre-heating of the
assemblies to prevent high-temperature shock and other
undesired effects.
(b) Reflow soldering of lead (Pb)-free SMD devices
By using infrared (IR) reflow soldering, the heating is
contact-free and the energy for heating the assembly is
derived from direct infrared radiation and from convection.
The heating rate in an IR furnace depends on the absorption
coefficients of the material surfaces and on the ratio of the
component's mass to an as-irradiated surface.
The temperature of parts in an IR furnace, with a mixture of
radiation and convection, cannot be determined in advance.
Temperature measurement may be performed by measuring
the temperature of a certain component while it is being
transported through the reflow oven.
Brochure Type
Influencing parameters on the internal temperature of the
component are as follows:
• Time and power
• Mass of the component
• Size of the component
• Size of the printed circuit board
• Absorption coefficient of the surfaces
• Packing density
• Wavelength spectrum of the radiation source
• Ratio of radiated and convected energy
Temperature/time profiles of the entire process and the
influencing parameters are given. The IR reflow profile is
shown in figure 1. Two cycles of reflow are allowed.
(c)
Wave soldering
(d)
Iron soldering
(e)
Laser soldering
(f)
Resistance soldering
In wave soldering one or more continuously replenished
waves of molten solder are generated, while the substrates
to be soldered are moved in one direction across the crest of
the wave. Maximum soldering temperature should not
exceed 260 °C.
Temperature/time profiles of the entire process are given in
figure 2.
For SMD devices which are qualified for wave soldering, the
temperature profile under figure 2 is also valid. For wave
soldering two cycles are allowed.
This process cannot be carried out in a controlled situation.
It should therefore not be used in applications where
reliability is important. There is no SMD classification for this
process.
This is an excess heating soldering method. The energy
absorbed may heat the device to a much higher temperature
than desired. There is no SMD classification for this process
at the moment.
This
is
a
soldering
method
which
uses
temperature-controlled tools (thermodes) for making solder
joints. There is no SMD classification for this process at the
moment.
36/58
VMN-PL0475-1410
Document
Number:
80054 TO CHANGEFor
technical
questions,
[email protected]
www.vishay.com
THIS
DOCUMENT
IS SUBJECT
WITHOUT
NOTICE.
THEcontact:
PRODUCTS
DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT
TO SPECIFIC
Rev. 1.6, 24-Nov-08
121
DISCLAIMERS,
SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Assembly Instructions
Vishay Semiconductors
Complete Product Por tfolio
Assembly Instructions
Assembly Instructions cont’d
TABLE 1 - SOLDERING METHODES AND TEMPERATURE PROFILES FOR OPTOCOUPLER
REFLOW
SMD
PACKAGE
DIP-6
DIP-8
DIP-4/8/16
DIP-6
DIP-4/8/16
DIP-4/8/16
DIP-6
DIP-4/8/16
DIP-4/8/16
DIP-8 high speed
DIP-6
DIP-8; DIP-16
PART NUMBER EXAMPLES
ASSEMBLY METHOD
IL1; IL2; H11; IL250; IL410
Through hole
SFH617A-2; SFH615
Through hole
IL300; SFH6700; 6N135
Through hole
VO615A
Through hole
CQY80NG; CNY75B; TCDT
VO615A series
THROUGH HOLE
TEMP. PROFILE
FIG. 2
TEMP. PROFILE
FIG. 2
X
X
Through hole
Through hole
SMD bend.opt.
X
X
X
SMD bend.opt.
X
Types with option 7, 8 or 9
SMD bend.opt.
X
SMD bend.opt.
X
No
No
No
SMD bend.opt.
X
No
SOP low profile
TCMT; TCLT series
SMD
X
Yes
SOP-4 (Miniflat)
SFH690
SOP-16 low profile
SO 8
SO8
PCMC IA
Minicoupler
IL30 0
SMD bend.opt.
X
SFH6916
SMD
X
IL205T; ILD207AT
S MD
X
VO026..; VO46..; VO06..
IL38 8
SMD
SMD
SMD
X
No
No
No
Yes
X
Yes
X
No
X
X
Yes
ILD2; ILQ2
DIP-8
X
X
SFH617A-2X007; 9; SFH6106
SFH6700; 6N135; SFH6325
SMD
PACKAGE
PACKAGE NOT
THROUGH WAVE THROUGH WAVE
Through hole
C N Y 1 7 ; S F H 6 1 5 AB M
TCET1104; TCET1104G
TEMP. PROFILE
FIG. 1
WAVE SOLDERING 260 °C
No
SFH6943
SMD
DIP-4
LH1546AD
Through hole
X
DIP-8
LH1526AB
Through hole
X
DIP-8
LHxxxBB
SSR’s
DIP-6
DIP-6
DIP-4
DIP-6
DIP-8
Miniflat
Flatpak’s
DIP-6
DIP-8
Brochure Type
LH1500AT
LHxxxBT
LH1546ADF
LH 1500AAB
LH1526AAC
LH1546AEF; VO14..
LH1556FP
LHxxxBAB
LHxxxBAC
Through hole
X
Through hole
Through hole
SMD bend.opt.
SMD bend.opt.
SMD bend.opt.
X
X
X
X
SMD
X
SMD bend.opt.
X
SMD bend.opt.
SMD bend.opt.
37/58
X
X
No
X
No
No
No
No
No
No
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Assembly Instructions
Assembly Instructions
Assembly Instructions cont’d
Vishay Semiconductors
TEMPERATURE-TIME PROFILES
RthJA = RthJC + RthCA
300
Temperature (°C)
max. 260 °C
255 °C
240 °C
217 °C
250
200
245 °C
Tamb
max. 100 s
max. 120 s
100
max. ramp down 6 °C/s
50
0
Tjmax. the maximum allowable junction temperature
max. 20 s
150
max. ramp up 3 °C/s
max. 2 cycles allowed
0
50
100
150
200
250
300
Time (s)
21620
Fig. 1 - Temperature Profile for Lead (Pb)-free Opto Devices
300
5s
Lead temperature
Temperature (°C)
250
235 °C to
260 °C
first wave
200
wave
ca. 200 K/s
150
100 °C to
130 °C
100
ca. 2 K/s
2 K/s
50
0
second
wave
full line: typical
dotted line:
process limits
ca. 5 K/s
forced cooling
0
50
94 8626
100
150
200
250
Time (s)
Fig. 2 - Wave Soldering Double Wave Opto Devices
HEAT REMOVAL
The heat generated in the semiconductor junction(s) must be
moved to the ambient. In the case of low-power devices, the
natural heat conductive path between case and surrounding
air is usually adequate for this purpose.
In the case of medium-power devices, however, heat
conduction may have to be improved by the use of star- or
flag-shaped heat dissipators which increase the heat
radiating surface.
The heat generated in the junction is conveyed to the case or
header by conduction rather than convection; a measure of
the effectiveness of heat conduction is the inner thermal
resistance or junction-to-case thermal resistance, RthJC,
whose value is given by the construction of the device.
Any heat transfer from the case to the surrounding air
involves radiation convection and conduction, the
effectiveness of transfer being expressed in terms of an
RthCA value, i.e., the case-to-ambient thermal resistance.
The total thermal resistance, junction-to-ambient is
therefore:
Document Number: 80054
Brochure
Type
Rev. 1.6, 24-Nov-08
The total maximum power dissipation, Ptotmax., of a
semiconductor device can be expressed as follows:
T jmax. – T amb
T jmax. – T amb
P totmax. = --------------------------------------- = ----------------------------------------R thJA
R thJC + R thCA
where:
the highest ambient temperature likely to be reached
under the most unfavorable conditions
RthJC the thermal resistance, junction-to-case
RthJA the thermal resistance, junction-to-ambient
RthCA the thermal resistance, case-to-ambient, depends on
cooling conditions. If a heat dissipator or sink is used,
then RthCA depends on the thermal contact between
case and heat sink, heat propagation conditions in
the sink and the rate at which heat is transferred to
the surrounding air.
Therefore, the maximum allowable total power dissipation for
a given semiconductor device can be influenced only by
changing Tamb and RthCA. The value of RthCA could be
obtained either from the data of heat sink suppliers or
through direct measurements.
In the case of cooling plates as heat sinks, the approach
outlined in fig. 3 and 4 can be used as guidelines. The curves
shown in both fig. 3 and 4 give the thermal resistance RthCA
of square plates of aluminium with edge length, a, and with
different thicknesses. The case of the device should be
mounted directly onto the cooling plate.
The edge length, a, derived from fig. 3 and 4 in order to
obtain a given RthCA value, must be multiplied
with α and β:
α' = α x β
where
α = 1.00 for vertical arrangement
α = 1.15 for horizontal arrangement
β = 1.00 for bright surface
β = 0.85 for dull black surface
Example
For an IR emitter with Tjmax. = 100 °C and RthJC = 100 K/W,
calculate the edge length for a 2 mm thick aluminum square
sheet having a dull black surface (β = 0.85) and vertical
arrangement (α = 1),
Tamb = 70 °C and Ptot max. = 200 mW.
T jmax. – T amb
P totmax. = -----------------------------------R thJC + R thCA
T jmax. – T amb
R thCA = -------------------------------------- – R thJC
P totmax
100 °C – 70 °C
R thCA = --------------------------------------- – 100 K/W
0.2 W
For technical questions, contact: [email protected]
38/58
www.vishay.com
VMN-PL0475-1410
123
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Assembly Instructions
Vishay Semiconductors
Complete Product Por tfolio
Assembly Instructions
Assembly Instructions cont’d
30
R thCA = ---------- – 100 K/W
0.2
100
Δ T = T case – T amb
can be calculated from the relationship:
RthCA (K/W)
R thCA = 50 K/W
T jmax. – T amb
T case – T amb
P totmax. = ------------------------------------- = ---------------------------------R thCA
R thJC + R thCA
R thCA ( T jmax. – T amb)
ΔT = T case – T amb = ------------------------------------------------------------R thJC + R thCA
50 K/W × 100 °C – 70 °C
ΔT = ----------------------------------------------------------------150 K/W
∆T = 10 °C
60 °C
10
1
10
30 °C
120 °C
Plate thickness: 0.5 mm
1000
100
a (mm)
94 7834
Fig. 3
With RthCA = 50 k/W and ΔT = 10 °C, a plate of 2 mm
thickness has an edge length α = 28 µ.
50 K/W × 30 °C
ΔT = ------------------------------------------150 K/W
100
RthCA (K/W)
ΔT = 10 °C = 10 K
1
∆T = 10 °C
60 °C
10
30 °C
120 °C
Plate thickness: 2 mm
10
94 7835
100
1000
a (mm)
Fig. 4
However, equipment life and reliability have to be taken into
consideration and therefore a larger sink would normally be
used to avoid operating the devices continuously at their
maximum permissible junction temperature.
www.vishay.com
124
Brochure Type
For technical questions, contact: [email protected]
39/58
Document Number: 80054
Rev. 1.6, 24-Nov-08
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Packaging, Tape and Reel Information
V I S H AY I N T E R T E C H N O L O G Y, I N C .
www.vishay.com
Vishay Semiconductors
Optocouplers
Packaging, Tape and Reel Information
DESCRIPTION
DEVICE PER TUBE
Complete
Product Por tfolio
Packaging, Tape
and Reel Information
Optocouplers are available in plastic dual-in-line packages
(DIP), SOP packages, and in a surface-mount, gull-wing,
lead bend configuration. Optocouplers purchased in the
DIP configuration are shipped in tubes. Optocouplers
purchased in a gull-wing configuration can be shipped in
tubes or on carrier tape. This section provides stick
specifications, tape and reel specifications, and component
information.
www.vishay.com
UNITS/TUBE
TUBES/BOX
UNITS/BOX
DIP-16
25
40
1000
40
4000
40
2000
DIP-4
100
Vishay Semiconductors
DIP-6
50
Packaging Information
Packaging, Tape and Reel Information
Packaging, Tape and Reel
Information
TUBE SPECIFICATIONS
DESCRIPTION
www.vishay.com
TYPE
DIP-8
50
40
2000
HV, CNY64
40
50
2000
HV, CNY65
30
35
1050
HV, CNY66
25
35
875
Figure 1 shows the physical dimensions of transparent,
Vishay
Semiconductors
DEVICE
TUBE
antistatic, plastic
shippingPER
tubes. Figure
2 shows tube safety
packages agency labeling and orientation information.
Optocouplers are available in plastic dual-in-line
TYPE
UNITS/TUBE TUBES/BOX
Packaging,
and Reel Information
(DIP), SOP packages,
and Tape
in a surface-mount,
gull-wing, The following table lists the number of parts per tube.
DIP-16
25
40
lead bend configuration. Optocouplers purchased in the
DESCRIPTION
DIP-4
100
40
DEVICE
PER
TUBE
DIP configuration are shipped in tubes. Optocouplers
Optocouplers are available in plastic dual-in-line packages
Dimensions
in millimeters
TYPE
UNITS/TUBE TUBES/BOX
DIP-6UNITS/BOX
50
40
purchased
in ina agull-wing
configuration
can
be shipped
in
(DIP), SOP
packages, and
surface-mount,
gull-wing,
DIP-16
25
40
1000
lead bend configuration. Optocouplers purchased in the
tubes
or
on
carrier
tape.
This
section
provides
stick
DIP-8 4000
50
40
260
± 0.5
DIP-4
100
40
DIP configuration are shipped in tubes. Optocouplers
specifications,
tape and
specifications,
and component
DIP-6
50
40 HV, CNY64
2000
purchased
in a gull-wing configuration
canreel
be shipped
in
40 200 ± 0.5
50
150 ± 0.5
tubes orinformation.
on carrier tape. This section provides stick
DIP-8
50
40
2000
HV, CNY65
30
35
specifications, tape and reel specifications, and component
information.
HV, CNY64
40
50
2000
HV, CNY65
30
35
1050
HV, CNY66
TUBE SPECIFICATIONS
HV, CNY66
25
35
The following table lists the number of parts per tube.
0.7 ± 0.5
260 ± 0.5
0.
1
2.7 ± 0.2
R
3 ± 0.5
5
10°
5.7 ± 0.15
// 0.2 B
0.104 ± 0.01
A
(2.6 ± 0.25)
0.
R
5
0.03 ± 0.01
(0.7 ± 0.25)
Top view
Vishay Semiconductors
Section A - B
A
Detail A
Detail B
Not to scale
17996
A
17997
– 1.0
(558.8 ± 1)
Fig. 2 - Shipping Tube Specifications for SOP Packages
Document Number: 83714
1
For technical questions, contact: [email protected]
– 1.0
SPECIFICATIONS
FOR
DIP
AND
HIGH
ISOLATION
VOLTAGE
PACKAGES
THISTUBE
DOCUMENT
IS
SUBJECT
TO
CHANGE
WITHOUT
NOTICE.
THE
PRODUCTS
DESCRIBED
HEREIN
AND
THIS DOCUMENT
0.104 ± 0.01
(2.6 ±ARE
0.25) SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.058 ± 0.008
(1.46 ± 0.19)
380 ± 1
Top ±view
12
0.3
06-Oct-11
– 1.0
0.312 ref.
(7.8 ref.)
B
Not to scale
0.03 ± 0.01
(0.7 ± 0.25)
1.0 14 x
13 x 10 = 130
Detail B
Detail A
not to scale
0.312 ref.
Section A - B
(7.8 ref.)
6.60.03± ±0.3
0.01
(0.7 ± 0.25)
17996
VISHAY OPTOSEMICONDUCTOR
0.03 ± 0.005
(0.7 ± 0.13)
0.344Rev.
± 0.012.2,
(8.6 ± 0.25)
0.03 ± 0.005
(0.7 ± 0.13)
11 ± 0.3
0.6 ± 0.1
4 (100)
0.46 ± 0.01
Vishay Semiconductors
(11.5 ± 0.25)
11 ± 0.3
0.6 ± 0.1
0.
0.7 ±
6°
0.46 ± 0.01
(11.5 ± 0.25)
0.344 ± 0.01
0.5
(8.6 ± 0.25)
0.312 ref.
(7.8 ref.)
Fig. 1 - Shipping Tube Specifications
22.4 ± for
0.04DIP Packages
Side view
scale: 4X
Transparent rigid PVC
R
4.4 ± 0.3
Detail A
0.104 ± 0.01
(2.6 ± 0.25)
2.7 ± 0.2
Transparent rigid PVC
ANTISTATIC
Dimensions in inches (millimeters)
0.344 ± Transparent
0.01
rigid PVC
(8.6 ± 0.25)
B
– 1.0
1.0 14 x
B
13 x 10 = 130
0.46 ± 0.01
528 ± 0.2(11.5B ± 0.25)
VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC
6.6 ± 0.3
1.0 14 x
VISHAY OPTOSEMICONDUCTOR
Detail B
12 ± 0.3
0.
VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC
10°
Dimensions
in inches
(millimeters)
Packaging,
Tape
and
Reel
Information
13 x 10 = 130
12 ± 0.3
www.vishay.com
Side view
scale: 4X
6.6 ± 0.3
0.03 ± 0.005
(0.7 ± 0.13)
– 1.0
380 ± 1
0.7 ± 0.5
– 1.0
to scale
Packaging, Tape
Information
– 1.0 andnotReel
5.7 ± 0.15
// 0.2 B
www.vishay.com
3 ± 0.5
4 (100)
0.
VISHAY OPTOSEMICONDUCTOR
4.4 ± 0.3
6°
22.4 ± 0.04
2.7 ± 0.2
(558.8 ± 1)
R
17997
1
Fig. 1 - Shipping Tube Specifications for DIP Packages
Top view
not to scale
ANTISTATIC
Rev. 2.2, 06-Oct-11
– 1.0
Vishay Semiconductors
0.058 ± 0.008
6°
(1.46 ± 0.19)
A
– 1.0
30 ± 0.5
B
A
380 ± 1
4.4 ± 0.3
B
150 ± 0.5
125 ± 0.5
875
– 1.0
1.0
Packaging,– Tape
and Reel Information
R
200 –± 0.5
1.0
Detail A
1050
Dimensions in inches (millimeters)
330 ± 0.5
150 ± 0.5
125 ± 0.5
0.058 ± 0.008
(1.46 ± 0.19)
Detail A
1
528 ± 0.2
330 ± 0.5
200 ± 0.5
Detail B
2000
www.vishay.com
Dimensions in millimeters
30 ± 0.5
528 ± 0.2
2000
35
3 ± 0.5
Dimensions in millimeters
2000
330 ± 0.5
VISHAY OPTOSEMICONDUCTOR MADE IN MALAYSIA ANTISTATIC
Detail B
agency labeling and orientation information.
The following table lists the number of parts per tube.
260 ± 0.5
4000
30 ± 0.5
875
1 physical
showsdimensions
the physical
dimensions of transparent,
Figure 1Figure
shows the
of transparent,
antistatic,antistatic,
plastic shipping
tubes. Figure
2 shows
tube safety
plastic
shipping
tubes.
Figure 2 shows tube safety
agency labeling and orientation information.
Side view
scale: 4X
25
1000
ANTISTATIC
TUBE SPECIFICATIONS
125 ± 0.5
UNITS/BOX
Fig. 2 - Shipping Tube Specifications
for SOP Packages
Document
Number:
83714
1
15912
For technical questions, contact: [email protected]
11 ± 0.3
Fig. 3 - DIP-6 N, G
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE.
THE PRODUCTS
HEREINISOLATION
AND THIS DOCUMENT
± 0.04
TUBE22.4
SPECIFICATIONS
FORDESCRIBED
DIP AND HIGH
VOLTAGE PACKAGES
ARE SUBJECT TO SPECIFIC DISCLAIMERS,
SET FORTH AT www.vishay.com/doc?91000
(558.8 ± 1)
15915
0.
5
4 (100)
R
17997
Fig. 4 - DIP-4, -2, -16 N, G
0.6 ± 0.1
Fig. 2 - Shipping Tube10°
Specifications for SOP Packages
A
Detail A
TUBE SPECIFICATIONS FOR DIP AND HIGH ISOLATION
VOLTAGE PACKAGES5.7 ± 0.15
// 0.2 B
Not to scale
Section A - B
Detail B
17996
Fig. 1 - Shipping Tube Specifications for DIP Packages
Rev. 2.2, 06-Oct-11
Document Number: 83714
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
15915
ARE SUBJECT TO SPECIFIC DISCLAIMERS,
SET FORTH AT www.vishay.com/doc?91000
15912
Rev. 2.2, 06-Oct-11
15912
Document Number: 83714
1
Fig. 3 - DIP-6 N, G
Fig. 4 - DIP-4, -2, -16 N, G
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
15915
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET
FORTH AT www.vishay.com/doc?91000
Brochure
Type
Fig. 3 - DIP-6 N, G
Fig. 4 - DIP-4, -2, -16 N, G
40/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Packaging, Tape and Reel Information
Complete
Product Por tfolio
Vishay Semiconductors
www.vishay.com
Top cover tape
Embossed carrier
Embossment
17998
15913
Fig. 5 - CNY64
Fig. 7 - Tape and Reel Shipping Medium
REELS
• As shown in figure 4, all reels contain standard areas for
the placement of ESD stickers and labels. Each reel also
has a tape slot in its core. The overall reel dimension is
13". Reels contain 1000 6 or 8 pin gullwing parts and
could have up to three inspection lots
ESD sticker
Tape slot
in core
330
(13")
15914
Fig. 6 - CNY65, 66
Regular, special
or bar code label
TAPE AND REEL SPECIFICATIONS
17999
Surface-mounted devices are packaged in embossed tape
and wound onto 13" molded plastic reels for shipment, to
comply with Electronics Industries Association Standard
EIA-481, revision A, and International Electrotechnical
Commission standard IEC 60286.
Fig. 8 - Tape and Reel Shipping Medium
Leaders and Trailers
The carrier tape and cover tape are not spliced. Both tapes
are one single uninterrupted piece from end to end, as
shown in figure 2. Both ends of the tape have empty pockets
meeting these requirements.
• Trailer end (inside hub of reel) is 200 mm minimum
• Leader end (outside of reel) is 400 mm minimum and
560 mm maximum
• Unfilled leader and trailer pockets are sealed
• Leaders and trailers are taped to tape and hub,
respectively, with masking tape
• All materials are static-dissipative
Rev. 2.2, 06-Oct-11
Document Number: 83714
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Brochure Type
41/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
4 ± 0.1
(0.157 ± 0.004)
2 ± 0.10
(0.079 ± 0.004)
16.00 + 0.30, -0.10
(0.013 (0.0008), -0.0004)
1.75 ± 0.1
1.5 + 0.10, - 0.00 (0.069 ± 0.004)
(0.59 ± 0.004)
V I S H AY I N T E R T E C H N O L O G Y, I N C .
7.5 ± 0.01
(0.295 ± 0.004)
Optocouplers
16 ± 0.3
(0.630 ± 0.012)
10.36 ± 0.10
0.408 ± 0.004
10.36 ± 0.10
0.408 ± 0.004
Complete Product Por tfolio
4°
8.0 ± 0.10
(0.315 + 0.004)
1.5 + 0.25, - 0.0
0.059 + 0.001, - 0.0
4.92 ± 0.10
0.194 ± 0.004
18401
Packaging, Tape
and
Packaging,
andReel
ReelInformation
Information
Packaging Tape
andTape
Reel
Information
Vishay
VishaySemiconductors
Semiconductors
Fig. 13
www.vishay.com
www.vishay.com
Dimensions in millimeters
TAPE AND REEL PACKAGING FOR SMD-4 OPTOCOUPLERS WITH OPTION 8
TAPE AND REEL PACKAGING FOR SMD-4 OPTOCOUPLERS WITH OPTION 7
TAPE AND REEL PACKAGING FOR SMD-4 OPTOCOUPLERS WITH OPTION 7
Dimensions in millimeters
Dimensions in millimeters
Dimensions in millimeters
Selected
4 pin optocouplers are available in tape and reel
The tape is 16 mm and is wound on a 33 cm reel.
There are
format.
To order
The
tape
is 16
is wound
on a 433pincm
reel. There
are any SFH6xx series optocoupler on tape
1000
parts
permm
reel.and
Taped
and reeled
optocouplers
conform
to EIA-481-2
and IECand
60286-3.
andoptocouplers
reel, add suffix “T” after the part number, i.e.,
1000
parts
per reel. Taped
reeled 4 pin
Selected 4 pin optocouplers are available in tape and reel
Selected
4 pinTooptocouplers
are availablewith
in tape
format.
order a 4 pin optocoupler
optionand
7 onreel
tape
reel, aadd
suffix “T” after
the part
format.and
To order
4 pina optocoupler
with option
7 onnumber,
tape
SFH615A-3X007T.
and reel,
add a suffix “T” after the part number,
SMD-4 Package, Option 7 (Factory code: 68)
conform to EIA-481-2 and IEC 60286-3.
SFH615A-3X007T.
The tape is 24 mm and is wound on a 33 cm reel. There are
2000 parts per reel. Taped and reeled 4 pin optocouplers
SMD-4 Package, Option
8 (Factory
code:
conform
to EIA-481-2 and IEC
60286-3.68)
SFH615A-4X018T.
10 pitch cumulative
tolerance on tape
± 0.2
10
pitch cumulative
tolerance on tape
± 0.2
2 ± 0.1
0.35 ± 0.05
1.5 + 0.1
4 ± 0.1
0.35 ± 0.05
1.75 ± 0.1
1.75 ± 0.1
1.75 ± 0.1
11.5 ± 0.1
24 ± 0.3
7.5 ± 0.1
5.05 ± 0.1
7.5 ± 0.1
5.05 ± 0.1
4°
Typ.
Typ.
6.51
3.71 ± 0.1
5°
Section X-X
8 ± 0.1
(1)
4.1 ± 0.1
Fig. 14
Packaging, Tape and Reel Information
Fig. 11
4.67 ± 0.1
4.65 ± 0.15 in the case of the VO61X series
R 0.76
Section X-X
21579
R 0.76
1.5 + 0.25, - 0.0
4.9 ± 0.35 (1)
8°
21831-1
1.5 + 0.250
10.41 ± 0.1
12 ± 0.1
X
X
4°
1.5 X
+ 0.250
X
10.41 ± 0.1
12 ± 0.1
16 ± 0.3
X
X
5°
6.51
12.10 ± 0.15
16 ± 0.3
5.05 ± 0.1
5.05 ± 0.1
4°
4.67 ± 0.1
1.5 ± 0.1
4 ± 0.1
2 ± 0.1
0.35 ± 0.05
1.5 + 0.1
4 ± 0.1
2 ± 0.1
3.71 ± 0.1
Note: 1000
parts
per reel R 0.76
Section X-X
Note: 2000 parts per reel
21579
www.vishay.com
TAPE AND REEL PACKAGING FOR SMD-4 OPTOCOUPLERS WITH OPTION 9
Vishay Semiconductors
Rev. 2.2, 06-Oct-11
Document Number: 83714
6
Fig. 11
Dimensions in millimeters
For technical questions, contact: [email protected]
Selected 4 pin optocouplers are available in tape and reel
The tape is 16 mm and is wound on a 33 cm reel. There
are AND REEL PACKAGING FOR SMD-4 OPTOCOUPLERS WITH OPTION 9, 90° ROTATION
TAPE
THIS
DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
order PACKAGING
any SFH6xx6 optocoupler
on tape and
reel,
1000 partsWITH
per reel.
Taped and
ARE SUBJECT
TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TAPEformat.
AND To
REEL
FOR SMD-4
OPTOCOUPLERS
OPTION
9 reeled 4 pin optocouplers
Dimensions in millimeters
(inches)
add suffix “T” after the part number, i.e., SFH6156-3T.
conform to EIA-481-2 and IEC60286-3.
Selected 4 pin optocouplers are available in tape and reel
tape is 16 mm and is wound on a 33 cm reel. There are
SMD-4 Package, Option 9,The
90°
Rotation
SMD-4 Package, Option 9The(Factory
tape is 16 mm andcode:
is wound on 68)
a 33 cm reel. format.
There areTo order any SFH6xx series optocoupler on tape
2000 parts per reel. Taped and reeled 4 pin optocouplers
1000 parts per reel. Taped and reeled 4 pin optocouplers
and reel with(Factory
this orientation, add
suffix “T1”
after the part
conform to EIA-481-2 and IEC 60286-3.
code:
68)
conform to EIA-481-2 and IEC60286-3.
number, i.e., SFH6156-5T1.
Dimensions in millimeters
Selected 4 pin optocouplers are available in tape and reel
1.5 min.
Pin 1 and
format. To order any SFH6xx6 optocoupler
on tape and reel,
top of component
add suffix “T” after the part number,
0.3 max. i.e., SFH6156-3T.
Top
cover
tape
Pin 1 and
top of component
10 pitch cumulative
tolerance on tape
± 0.2
4 ± 0.1
2 ± 0.05
10 pitch cumulative
tolerance on tape
± 0.2
4 ± 0.1
1.5 min.
2 ± 0.05
10.2
0.3 max.
4.07
Embossment
13.3
12
4 ± 0.1
2 ± 0.10
16.00 + 0.30, -0.10
16 ± 0.3
5.05
10.2
0.1 max.
18005
1.75 ± 0.1
7.5 ± 0.05
Top
cover 13.3
tape
4.07
1.75 ± 0.1
1.5 + 0.10, - 0.00
7.5 ± 0.05
Center lines
of cavity
5.05
Direction of feed
7.5 ± 0.01
16 ± 0.3
Ø 1.5
1.75 ± 0.1
10.36 ± 0.10
Fig. 12
16 ± 0.3
10.36 ± 0.10
12
0.1 max.
Rev. 2.2, 06-Oct-11
Center lines
Ø 1.5Document Number: 83714
Embossment
5
of cavity
For technical questions, contact: [email protected]
Direction of feed
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Fig. 12
ARE SUBJECT TO SPECIFIC DISCLAIMERS,
SET FORTH AT www.vishay.com/doc?91000
4°
18005
Rev. 2.2, 06-Oct-11
8.0 ± 0.10
Document Number: 83714
5
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note: 1000 parts per reel
1.5 + 0.25, - 0.0
4.92 ± 0.10
18401
Fig. 13
Note: 2000 parts per reel
TAPE AND REEL PACKAGING FOR SMD-4 OPTOCOUPLERS WITH OPTION 8
Dimensions in millimeters
Selected 4 pin optocouplers are available in tape and reel
format. To order any SFH6xx series optocoupler on tape
and reel, add suffix “T” after the part number, i.e.,
SFH615A-4X018T.
The tape is 24 mm and is wound on a 33 cm reel. There are
SMD-4 Package, Option 8 2000
(Factory
Code
parts per reel.
Taped and24)
reeled 4 pin optocouplers
SMD-4 Package, Option 7 and Option 9
(Factory Code 24)
conform to EIA-481-2 and IEC 60286-3.
10 pitch cumulative
tolerance on tape
± 0.2
2 ± 0.1
0.35 ± 0.1
4 ± 0.1
1.5 1.5
± 0.1± 0.1
4 ±40.1
± 0.1
2 ± 0.1
2 ± 0.1
0.35 ± 0.05
0.35 ± 0.1
1.55 + 0.1
1.75 ± 0.1
1.75 ± 0.1
1.75 ± 0.1
11.5 ± 0.1
11.5 ± 0.1
7.5 ± 0.1
12.5 ± 0.1
16 ± 0.3
4.65 ± 0.1
5° max.
X
5° max.
4°
5° max.
X
X
5° max.
8 ± 0.1
8°
21831-1
12 ± 0.1
4.55 ± 0.1
24 ± 0.3
24 ± 0.3
12.10 ± 0.15
1.5 ± 0.1
3.9 ± 0.1
10.3 ± 0.1
4.65 ± 0.1
4.1 ± 0.1 Section X-X
8 ± 0.1
4.9 ± 0.35
R0.76
(1)
R 0.76
Section X-X Fig. 19 - Tape and Reel Packing for Option 8
Section X-X
(1)
X
X
X
1.5 + 0.25, - 0.0
1.5 ± 0.1
4.65 ± 0.15 in the case of the VO61X series
(2000 units per reel)
Fig. 14
Note: 1000 parts per reel
Brochure Type
Note: 2000 parts per reel
Rev. 2.2, 06-Oct-11
Document Number: 83714
6
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMEN T
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
42/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Packaging, Tape and Reel Information
www.vishay.com
Packaging, Tape and Reel Information
www.vishay.com
Vishay
Vishay Semiconductors
Complete Product Por tfolio
TAPE AND REEL PACKAGING FOR SMD-6 OPTOCOUPLERS WITH OPTION 7
Semiconductors
Dimensions in millimeters
TAPE AND REEL PACKAGING FOR SMD-6 OPTOCOUPLERS WITH OPTION 7
Selected 6 pin optocouplers with option 7 are available in
tape and reel format. To order 6 pin optocoupler with option
onreel.
tapeThere
and are
reel, add a suffix “T” after the option, i.e.,
The tape is 16 mm and is wound on a 337cm
1000 parts per reel. Taped and reeled 6CNY17-3X007T.
pin optocouplers
conform to EIA-481-2 and IEC 60286-3.
Dimensions in millimeters
SMD-4 Package, Option 7 and Option 9
(Factory Code 25)
Selected 6 pin optocouplers with option 7 are available in
tape and reel format. To order 6 pin optocoupler with option
7 on tape and reel, add a suffix “T” after the option, i.e.,
CNY17-3X007T.
2 ± 0.1
Ø 1.55 ± 0.05
Pi n 1 and top
of component
0.35
SMD-6 Package, Option 7 (Factory code: 68)
4 ± 0.1
1.75 ± 0.1
Top
cover
tape
7.5 ± 0.1
16 ± 0.3
Top
cover
tape
10 pitch cumulative
tolerance on tape
± 0.2
1.75 ± 0.1
4 ± 0.1
2 ± 0.05
1.5 min.
Pi n 1 and top
of component
0.35
10 pitch cumulative
tolerance on tape
± 0.2
1.75 ± 0.1
4 ± 0.1
2 ± 0.05
1.5 min.
The tape is 16 mm and is wound on a 33 cm reel. There are
1000 parts per reel. Taped and reeled 6 pin optocouplers
conform to EIA-481-2 and IEC 60286-3.
10.4
7.5 ± 0.05
16 ± 0.3
4.57
10.4
7.5 ± 0.05
12 ± 0.1
4.57
9
13.3
16 ± 0.3
0.3 ± 0.05
9
13.3
12
0.1 max.
12
0.1 max.
22536-2
Fig. 19 - Tape and Packing for Option 7 and Option 9
Embossment
18006
Note: 1000 parts per reel
Center lines
of cavity
Embossment
Ø 1.5
Direction of feed
Ø 1.5
Fig. 15
Note: 1000 parts per reel
Direction of feed
Fig. 15
Center lines
of cavity
18006
TAPE AND REEL PACKAGING FOR SMD-6 OPTOCOUPLERS WITH OPTION 9
Dimensions in millimeters
TAPE AND REEL PACKAGING FOR SMD-6 OPTOCOUPLERS WITH OPTION 9
Selected 6 pin optocouplers with option 9 are available in
tape and reel format. To order 6 pin optocoupler with option
onreel.
tapeThere
and are
reel, add a suffix “T” after the option, i.e.,
The tape is 16 mm and is wound on a 339cm
1000 parts per reel. Taped and reeled 6CNY17-3X009T.
pin optocouplers
Dimensions in millimeters
Selected 6 pin optocouplers with option 9 are available in
tape and reel format. To order 6 pin optocoupler with option
9 on tape and reel, add a suffix “T” after the option, i.e.,
CNY17-3X009T.
to EIA-481-2
and IEC 60286-3.
SMD-6 Package, Option 9 conform
(Factory
code:
68)
SMD-6 Package, Option 7 and Option 9
(Factory Code 25)
10 pitch cumulative
tolerance on tape
± 0.2
1.75 ± 0.1
4 ± 0.1
1.5 min.
2 ± 0.05
2 ± 0.05
0.3 max.
Ø 1.55 ± 0.05
Top
cover
tape
0.3 max.
10 pitch cumulative
tolerance on tape
± 0.2
1.75 ± 0.1
4 ± 0.1
1.5 min.
Pin 1 and top
of component
Pin 1 and top
of component
The tape is 16 mm and is wound on a 33 cm reel. There are
1000 parts per reel. Taped and reeled 6 pin optocouplers
conform to EIA-481-2 and IEC 60286-3.
2 ± 0.1
4 ± 0.1
1.75 ± 0.1
10.35
Top
cover
tape
7.5
0.1
7.5
±±
0.05
1616±±0.3
0.3
4.09
10.35
7.5 ± 0.05
9.14
13.3
16 ± 0.3
4.09
9.14
13.3
12
12 ± 0.1
0.1 max.
12
0.1 max.
18007
Embossment
Center lines
of cavity
18007
Embossment
0.3 ± 0.05
Center lines
of cavity
Ø 1.5
Direction of feed
Ø 1.5
Fig. 16
Direction of feed
22537-1
Fig. 15 - Tape and Reel Drawing, 1000 Units per Reel
Packaging, Tape and Reel Information
Fig. 16
www.vishay.com
Note: 1000 parts per reel
Vishay Semiconductors
Note: 1000 parts per reel
Rev. 2.2, 06-Oct-11
Number: 83714
TAPE AND REEL PACKAGING FOR SMD-8 7OPTOCOUPLERS WITH OPTIONDocument
7
For technical questions, contact: [email protected]
Dimensions in millimeters (inches)
THIS
DOCUMENT
IS
SUBJECT
TO
CHANGE
WITHOUT
NOTICE.
THE
PRODUCTS
DESCRIBED
HEREIN
AND
THIS
DOCUMENT
Document Number: 83714
SUBJECT TOwith
SPECIFIC
SETinFORTH AT
www.vishay.com/doc?91000
Selected 8 pinARE
optocouplers
optionDISCLAIMERS,
9 are available
The
tape is 16 mm and is wound on a 33 cm reel. There are
Rev. 2.2, 06-Oct-11
7
For technical questions, contact: [email protected]
tape and reel format. To order 8 pin optocoupler with option
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
7 on tape and reel, add a suffix “T” after the option, i.e.,
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SMD-4 Package, Option 7 and Option 9
(Factory Code 24)
10 pitch cumulative
tolerance on tape
± 0.2
2 ± 0.1
0.35 ± 0.1
4 ± 0.1
1000 parts per reel. Taped and reeled 8-pin optocouplers
conform to EIA-481-2 and IEC 60286-3.
SMD-8 Package, Option 7 (Factory
code: 68)
ILCT6-X007T.
0.35
1.55 + 0.1
Pin 1 and
top of component
Top
cover
tape
1.75 ± 0.1
4 ± 0.1
1.5 min.
2 ± 0.05
10 pitch cumulative
tolerance on tape
± 0.2
1.75 ± 0.1
10.41
7.5 ± 0.05
4.7
7.5 ± 0.1
16 ± 0.3
4.65 ± 0.1
12.0
5° max.
X
5° max.
12 ± 0.1
4.55 ± 0.1
16.0 ± 0.3
10.21
13.3
10.3 ± 0.1
0.1 max.
X
Embossment
18008
Center lines
of cavity
Direction of feed
1.5
Fig. 17
1.5 ± 0.1
TAPE AND REEL PACKAGING FOR SMD-8 OPTOCOUPLERS WITH OPTION 9
Section X-X
Fig. 18 - Tape and Reel Packing for Option 7 and Option 9
(1000 units per reel)
Note: 1000 parts per reel
Dimensions in millimeters (inches)
Selected 8-pin optocouplers with option 9 are available in
tape andNote:
reel format.
order 8per
pin optocoupler
with option
1000Toparts
reel
9 on tape and reel, add a suffix “T” after the option, i.e.,
ILCT6-X009T.
Pin 1 and
top of component
The tape is 16 mm and is wound on a 33 cm reel. There are
1000 parts per reel. Taped and reeled 8 pin optocouplers
conform to EIA-481-2 and IEC 60286-3.
10 pitch cumulative
tolerance on tape
± 0.2
4 ± 0.1
1.5 min.
2 ± 0.05
0.35
Top
cover
tape
Brochure Type
43/58
1.75 ± 0.1
10.2
7.5 ± 0.05
4.17
16.0 ± 0.3
VMN-PL0475-1410
13.3
10.31
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC
12.0
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.1 max.
Embossment
Center lines
18009
Direction of feed
of cavity
1.5
0.35
Top
cover
tape
1.75 ± 0.1
V I S H AY I N T E R T E C H N O L O G Y, I N C .
10.41
7.5 ± 0.05
4.7
16.0 ± 0.3
10.21
13.3
Optocouplers
12.0
0.1 max.
Embossment
18008
Center lines
of cavity
Direction of feed
Complete Product Por tfolio
1.5
Fig. 17
TAPE AND REEL PACKAGING FOR SMD-8 OPTOCOUPLERS WITH OPTION 9
Dimensions in millimeters (inches)
Selected 8-pin optocouplers with option 9 are available in
tape and reel format. To order 8 pin optocoupler with option
9 on tape and reel, add a suffix “T” after the option, i.e.,
ILCT6-X009T.
The tape is 16 mm and is wound on a 33 cm reel. There are
1000 parts per reel. Taped and reeled 8 pin optocouplers
SMD-8 Package, Option 7 and
Option 9
SMD-8 Package, Option 7 (Factory Code 28)
conform to EIA-481-2 and IEC 60286-3.
(Factory code: 68)
10 pitch cumulative
tolerance on tape
± 0.2
4 ± 0.1
1.5 min.
Pin 1 and
top of component
2 ± 0.05
0.35
1.75 ± 0.1
Top
cover
tape
10.2
7.5 ± 0.05
4.17
16.0 ± 0.3
10.31
13.3
12.0
0.1 max.
Embossment
18009
Center lines
of cavity
Direction of feed
1.5
Fig. 19 - Reel Dimensions (1000 units per reel)
Fig. 18
Note: 1000 parts per reel
Note: 1000 parts per reel
Packaging, Tape and Reel Information
Document
Number: 83714
Packaging,
Tape and Reel
Information
8
Packaging,
Tape DESCRIBED
and Reel
Information
Vishay
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE. THE PRODUCTS
HEREIN
AND Semiconductors
THIS DOCUMENT
Rev. 2.2, 06-Oct-11
www.vishay.com
For technical questions, contact: [email protected]
www.vishay.com
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
TAPE AND REEL PACKAGING FOR SOP-8 OPTOCOUPLERS
Vishay Semiconductors
Dimensions in millimeters (inches)
Vishay Semiconductors
TAPE AND REEL PACKAGING FOR SINGLE CHANNEL SOIC8 OPTOCOUPLERS
Dimensions in millimeters (inches)
The tape is 12 mm wide on a 33 cm reel. There are
SOIC-8 Package (Single Channel)
2000 parts per reel. Taped and reeled SOIC8-A
SOP-8
Selected 8 pin 2Package
mm optocouplers are available in tape and
Dimensions in millimeters (inches)
Selected SOIC8 optocouplers are available in tape and reel
The tape is 16 mm and is wound on a 33 cm reel. There
are To order surface mount IL2XXA optocoupler on tape
format.
reel format. To order 8 pin 2 mm optocoupler on tape and
2000 parts per reel. Taped and reeled 8 pin and
2 mm
reel, add a suffix “T” after the part number, i.e., IL207AT.
reel, add
a suffix “T”are
after
the partinnumber.
60286-3.
Selected SOIC8
optocouplers
available
tape and reel
The tape optocouplers
is 12 mm conform
wide ontoa EIA-481
33 cm and
reel.IEC
There
are
format. To order surface mount IL2XXA optocoupler on tape
2000 parts per reel. Taped and reeled SOIC8-A
and reel, add a suffix “T” after the part number, i.e., IL207AT.
optocouplers conform to EIA-481-2 and IEC 60286-3.
TAPE AND REEL PACKAGING FOR SINGLE CHANNEL SOIC8 OPTOCOUPLERS
Pin 1 and
top of component
0.35 (0.014)
Pin 1 and
top of component
Top
cover
tape
0.35
4 ± 0.1
10 pitch cumulative
(1.57 ± 0.004)
tolerance on tape
2 ± 0.05 (0.079 ± 0.002)
± 0.2 (0.008)
4 ± 0.1
10 pitch cumulative
tolerance on tape
2 ± 0.05
± 0.2
1.75 ± 0.1
(0.069 ± 0.004)
1.5 (0.059) min.
1.5 min.
9.04 (0.356)
Top
cover
tape
2.77 (0.109)
6.05
(0.238)
13.3 (0.523)
3.78
5.25
9.2
8.0 ± 0.1
0.1 max.
Top
cover
tape
1.75 ± 0.1
6.4
5.5
3.78
Embossment
18003
Direction of feed
Fig. 21
Direction of feed
2000 parts per reel
Center lines
of cavity
Center lines
of cavity
12.0 ± 0.3
1.5 (0.059)
8.0 ± 0.1
Embossment
18003
Center lines
of cavity
Direction of feed
1.5
Fig. 9
1.5
Note: 2000 parts per reel
TAPE AND REEL PACKAGING FOR DUAL CHANNEL
Fig. 9
TAPE AND REEL PACKAGING FOR SOT223/10 MINI-COUPLERS
Dimensions in millimeters (inches)
12.0 ± 0.3
5.25
9.2
12.0 (0.472)
Embossment
10 pitch cumulative
tolerance on tape
± 0.2
2 ± 0.05
0.35
7.5 ± 0.05 16.0 ± 0.3
(0.295 ± 0.002) (0.630 ± 0.012)
5.5
4 ± 0.1
1.5 min.
0.1 max.
0.1 (0.004) max.
18012
1.75 ± 0.1
6.4
Pin 1 and
top of component
optocouplers conform to EIA-481-2 and IEC 60286-3.
Dimensions in millimeters (inches)
(1)
SOIC8 OPTOCOUPLERS
Packaging, Tape and Reel Information
Note
Selected dual SOIC8 optocouplers are available in tape and
TAPE AND
REEL10PACKAGING
FOR
OPTOCOUPLERS
Selected
pin mini-couplers
are DUAL
availableCHANNEL
in tape and reel SOIC8
The
tape is 16 mm and is wound on a 33 cm reel. There
are
(1) Select dual channel devices are available in the shorter SOIC-8
reel format.
To order
surface mount ILD2XX optocoupler on
www.vishay.com
Dimensionsformat.
in millimeters
(inches)
To order
surface mount optocoupler on tape and
2000 parts per reel. Taped and reeled 10 pin mini-couplers
Vishay
package and will be taped
according Semiconductors
to the single channel
tape and reel, add a suffix “T” after the part number, i.e.,
taping specification
reel,
add aoptocouplers
suffix “T” afterare
theavailable
part number.
conform to EIA-481 and IEC 60286-3.
Note
Selected dual
SOIC8
in tape and
ILD207T.
(1) Select dual channel devices are available in the shorter SOIC-8
reel format. To order surface mount ILD2XX optocoupler on
TAPE
AND
REEL
PACKAGING
FOR
SMD-16
OPTOCOUPLERS WITH OPTION 7
The
tape
is
16
mm
and
is
wound
on
a
33
cm
reel.
There
are
package and will be taped according to the single channel
tape and reel, add a suffix “T” after the part number, i.e.,
Dimensions
in millimeters
(inches)
2000
parts per
reel. Taped
and reeled dual SOIC8
taping specification
10 pitch cumulative
ILD207T.
tolerance on tape
4 ± 0.1
1.5 min.
Pin 1 and
optocouplers
to EIA-481-2
IEC 60286-3.
Selected 16conform
pin optocouplers
withand
option
7 are available in
The tape is 32 mm and is wound on a 33 cm reel. There are
± 0.2
2 ± 0.05
of component
The tape is 16 mm and is wound on a 33topcm
reel. There are
tape and reel format. To order 16 pin optocoupler with
750 parts per reel. Taped and reeled 16 pin optocouplers
0.3 max.
2000 parts per reel. Taped and
reeled dual SOIC8
option 7 on tape and reel, add a suffix “T” after the option,
conform to EIA-481 and IEC 60286-3.
optocouplers conform to EIA-481-2 Top
and IEC 60286-3.
10 pitch cumulative
4 ± 0.1
i.e., ILQ-X007T.
1.75 ± 0.1
tolerance on tape
1.5 min.
Pin 1 and
(1)
SMD-16 Package, Option 7
SOIC-8 Package (Dual Channel)
cover
tape
7.29
2.0
0.3 max.
Pin 1 and
top of component
0.1 max.
2 ± 0.05
6.6
Pin 1 and
Top
cover
top of component
tape
0.35 max.
16.0 ± 0.3
Direction of feed
6.35
13.3
Embossment
18004
Direction of feed
6.6
7.5 ± 0.05 1.75 ± 0.1
16.0 ± 0.3
10.41
6.35
Direction of
feed
16.0
0.1 max.
1.5
10
For technical questions, contact: [email protected]
Center lines
of cavity
Embossment
18004
Fig. 10
Embossment
18010
1.5
Center lines
of cavity
Direction of feed
Fig. 10
Rev. 2.2, 06-Oct-11
32
14.2 ± 0.05
8.0 20.29
25.5
0.1 max.
Center lines
of cavity
2 ± 0.05
4.72
Fig. 22
8.0
0.1 max.
1.5 min.
13.3
Center lines
7.5 ± 1.5
0.05
of cavity
16.0 ± 0.3
10 pitch cumulative
tolerance on tape
± 0.2 1.75 ± 0.1
4 ± 0.1
Top
cover
tape
3.8
Embossment
± 0.2
0.3 max.
7.5 ± 0.05
1.75 ± 0.1
12.0
18013
2 ± 0.05
top of component
10 pitch cumulative
tolerance on tape
± 0.2
4 ± 0.1
6.76
13.3
Top
cover
tape
3.8
1.5 min.
2.0
Fig. 19
Document Number: 83714
Rev. 2.2, 06-Oct-11
Document Number: 83714
4
For technical questions, contact: [email protected]
AND REEL
PACKAGING
SMD-16
OPTOCOUPLERS WITH OPTION 9
DOCUMENT
TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENTTAPENote:
Note:THIS
2000
partsIS SUBJECT
per reel
750ISparts
per
reelFORWITHOUT
THIS DOCUMENT
SUBJECT
TO CHANGE
NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Rev. 2.2, 06-Oct-11
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Document Number: 83714
4
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
ARE SUBJECT
Dimensions in millimeters
(inches)TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Selected 16-pin optocouplers with option 9 are available in
tape and reel format. To order 16 pin optocoupler with
option 9 on tape and reel, add a suffix “T” after the option,
i.e., ILQ1-X009T.
Pin 1 and
top of component
The tape is 32 mm and is wound on a 33 cm reel. There are
750 parts per reel. Taped and reeled 16 pin optocouplers
conform to EIA-481 and IEC 60286-3.
4 ± 0.1
1.5 min.
2 ± 0.05
10 pitch cumulative
tolerance on tape
± 0.2
0.35
Top
cover
tape
1.75 ± 0.1
10.19
14.2 ± 0.05
4.30
Brochure Type
20.24
25.5
44/58
16.0
0.1 max.
Embossment
32
VMN-PL0475-1410
Center lines
2.0
of cavity
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT
TO SPECIFIC
Direction of feed
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Fig. 20
18011
Top
cover
tape
cover
tape
1.75 ± 0.1
(0.069 ± 0.004)
9.04 (0.356)
10.41
4.72
7.5 ± 0.05 16.0 ± 0.3
(0.295 ± 0.002) (0.630 ± 0.012)
V I S H AY I N T E R T E C H N O L O G Y, I N C .
2.77 (0.109)
32
14.2 ± 0.05
13.3 (0.523)
20.29
25.5
6.05
(0.238)
Optocouplers
12.0 (0.472)
16.0
0.1 max.
0.1 (0.004) max.
Embossment
18010
Center lines
of cavity
Direction of feed
2.0
18012
Embossment
Center lines
of cavity
Direction of feed
Complete Product Por tfolio
Fig. 21
Fig. 19
TAPE AND REEL PACKAGING FOR SMD-16 OPTOCOUPLERS WITH OPTION 9
TAPE AND REEL PACKAGING FOR SOT223/10 MINI-COUPLERS
Dimensions in millimeters (inches)
Dimensions in millimeters (inches)
Selected
10 pin mini-couplers are available in tape and reel
The tape is 32 mm and is wound on a 33 cm reel.
There are
format. To order surface mount optocoupler on tape and
750 parts per reel. Taped and reeled 16 pin optocouplers
reel, add a suffix “T” after the part number.
conform to EIA-481 and IEC 60286-3.
Selected 16-pin optocouplers with option 9 are available in
tape and reel format. To order 16 pin optocoupler with
option 9 on tape and reel, add a suffix “T” after the option,
i.e., ILQ1-X009T.
SMD-16 Package, Option 9
Pin 1 and
top of component
2 ± 0.05
10 pitch cumulative
tolerance on tape
± 0.2
Top
cover
tape
7.5 ± 0.05
2.0
1.75
16.0
technical drawings
according to DIN
specification
2.0
0.1 max.
2
7.5
Center lines
of cavity
1.5
Fig. 22
5°
Note: 2000 parts per reel7.4
Ø 1.6
12
2.2
Direction of pulling out
Document Number: 83714
9
For technical questions, contact: [email protected]
0.3
Direction of feed
Packaging, Tape and Reel Information
Rev. 2.2, 06-Oct-11
4
12.0
10.6
16
Fig. 20
16.0 ± 0.3
2.6
Embossment
18013
Note: 750 parts per reel
6.76
Ø 1.55
13.3
Center lines
of cavity
1.75 ± 0.1
7.29
2000 pcs/reel
32
14.2 ± 0.05
Direction of feed
Vishay Semiconductors
tape
Dimensions in millimeters
20.24
Embossment
10 pitch cumulative
tolerance on tape
± 0.2
4 ± 0.1
2 ± 0.05
0.3 max.
1.75 ± 0.1
18011
Packaging, Tape and Reel Information
Top
TAPE AND REEL PACKAGING
FOR TCMT4XXX SERIES
cover
10.19
0.1 max.
1.5 min.
Pin 1 and
top of component
www.vishay.com
0.35
25.5
The tape is 16 mm and is wound on a 33 cm reel. There are
2000 parts per reel. Taped and reeled 10 pin mini-couplers
conform to EIA-481 and IEC 60286-3.
SOT223/10 Package
4 ± 0.1
1.5 min.
4.30
1.5 (0.059)
18427
Document Number: 83714
10Fig. 23
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
TAPE AND REELARE
PACKAGING
FOR TCMT4XXXT0
SUBJECT TO SPECIFIC
DISCLAIMERS, SET SERIES
FORTH AT www.vishay.com/doc?91000
Rev. 2.2, 06-Oct-11
www.vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Vishay Semiconductors
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
PE AND REEL PACKAGING FOR TCMT4XXX SERIES
Dimensions in millimeters
SSOP-16 Package, 180° Degree Rotation
SSOP-16 Package
ensions in millimeters
0 pcs/reel
2000 pcs/reel
Packaging, Tape and Reel Information
www.vishay.com
4
0.3
Vishay Semiconductors
2.6
Ø 1.55
2
1.75
1.75
Ø 1.55
2.6
4
2
0.3
TAPE
AND REEL PACKAGING FOR TCMT1XXX SERIES
technical drawings
technical drawings
according to DIN
specification
according to DIN
specification
Dimensions in millimeters
7.5
7.5
2.6
18427_1
5°
Fig. 24
Note: 2000 parts per reel
Packaging, Tape and Reel Information
Ø 1.6
2.95
www.vishay.com
2.2
Direction of pulling out
7.4
16
Note: 2000 parts per reel
PE AND REEL PACKAGING FOR TCMT4XXXT0 SERIES
8
2.2
Direction of pulling out
18428
Vishay Semiconductors
Fig. 25
Ø 1.55
2.6
1.75
4
TAPE AND REEL PACKAGING FOR 2TCMT1XXX SERIES
SSOP-4 Package, 180° Degree Rotation (Factory Code 68)
0.3
SSOP-4 Package (Factory Code 68)
TAPE AND REEL PACKAGING FOR TCMT1XXXT3 SERIES
Dimensions
technical drawings in millimeters
Dimensions in millimeters
according to DIN
specification
1.75
Ø 1.55
7.5
16
10.6
2.6
Ø 1.55
4
2
0.3
5°
7.5
Rev. 2.2, 06-Oct-11
2.2
2.6
0.3
Document Number: 83714
11
Pot cover tape
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
7.5
7.4
16
Ø 1.6
12
7.4
4
2
2.95
technical drawings
according to DIN
specification
1.75
technical drawings
according to DIN
specification
Ø 1.6
7.5
18427
0.3
5°
1.75
12
7.4
Fig. 23
0 pcs/reel
4
2
2.2
Direction of pulling out
ensions in millimeters
Ø 1.55
16
5°
Ø 1.6
12
7.4
10.6
10.6
16
technical drawings
according to DIN
specification
Direction of pulling out
13.3
5°
Ø 1.6
2.95
7.4
16
18427_1
Fig. 24
8
2.2
Direction of pulling out
18428
8
Pin 1 and top of
component
20951
Fig. 25
Ø 1.6
2.2
Direction of feed
TAPE AND REEL PACKAGING FOR TCMT1XXXT3 SERIES
Note: 3000 parts per reel
Note: 2000 parts per reel
Dimensions in millimeters
Fig. 26
Ø 1.55
4
2
2.95
2.6
0.3
1.75
technical drawings
according to DIN
specification
Pot cover tape
2.2, 06-Oct-11
7.5
Document Number: 83714
11
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
13.3
7.4
16
20951
Brochure Type
8
Pin 1 and top of
component
Ø 1.6
Direction of feed
Fig. 26
2.2
Rev. 2.2, 06-Oct-11
12
For technical questions, contact: [email protected]
Document Number: 83714
45/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED
HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Packaging, Tape and Reel Information
www.vishay.com
Vishay Semiconductors
TAPE AND REEL PACKAGING FOR TCLT PRODUCT SERIES (both SOP-4L and SOP-4L5)
SSOP-4 Package (Factory Code 25)
LSOP-4 and LSOP-5 Package
Dimensions in millimeters
3000 pcs/reel
2 ± 0.1 Tape
4 ± and
0.1
1.75 ± 0.1 Information
Packaging,
Reel
1.75
Vishay Semiconductors
TAPE AND REEL PACKAGING FOR TCLT PRODUCT SERIES (both SOP-4L
5.5 ± SOP-4L5)
0.1
and
10.6
5°
2.7
4
4.25
0.3
technical drawings
according to DIN
specification
8
Ø 1.6
1.75
Ø 1.55
8 ± 0.1
0.3
7.5
16
3000 pcs/reel
2
2.7
4
2
technical drawings
according to DIN
specification
12 ± 0.3
Dimensions in millimeters
Ø 1.55
Ø 1.50 ± 0.1
www.vishay.com
2.3
18429
Direction of pulling out
7.5
0.35 ± 0.05
Fig. 27
TAPE AND REEL PACKAGING 4 PIN MINIFLAT FOR SFH690ABT, SFH690AT, SFH690BT, SFH690CT
5°
Dimensions in millimeters
(inches)
Note:
3000
8
parts per reel
Packaging, Tape and Reel Information
2.3
www.vishay.com
18429
Direction of pulling out
Fig. 27
+ 0.3
0.318 - 0.1
2.0 0 ± 0.05
1.50 + 0.1
4.0 0 ± 0.1
1.7 5 ± 0.1
Dimensions in millimeters (inches)
SOP-4 Package, 180° Degree
Rotation
eg. SFH690BT3.
The tape is 16 mm and is wound on a
33 cm reel. There are 2000 parts per reel.
(Factory Code 68)
SOP-4 Package (Factory Code 68)
TAPE AND REEL PACKAGING 4 PIN MINIFLAT FOR SFH690ABT, SFH690AT, SFH690BT, SFH690CT
Selected 4 pin miniflats
are available in tape and reel format
Typ. 4.30
3
4°
0.76 R
1.50 + 0.1
4.0 0 ± 0.1
2.3 6 ± 0.1
1.7 5 ± 0.1
2.6 6 ± 0.1
18956
5.5 0 ± 0.05
Typ. 4.30
7.33 ± 0.1
0.76 R
18956
2
3
1
4
4°
8°
2.3 6 ± 0.1
1.7 5 ± 0.1
Fig. 28
4
7.3 3 ± 0.1
1
5.50 ± 0.05
8°
2.3 6 ± 0.1
1.50 + 0.25
8.00 ± 0.1
2.66 ± 0.1
4.7 2 ± 0.1
18956_1
Fig. 29
Fig. 28
Note: 2000 parts per reel (T3 rotation)
Note: 2000 parts per reel
Rev. 2.2, 06-Oct-11
SOP-4 Package (Factory Code 25)
HV Package (CNY64S)
13
Document Number: 83714
4.00 ± 0.1
± 0.15
For technical+ 0.10
questions,2.00
contact:
[email protected]
Ø 1.50 0.00
Y
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT
NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
0.40 ± 0.05
1.75 ± 0.1
14.20 ± 0.1
4 ± 0.1
16.20 ref.
2 ± 0.1
13.20 ± 0.1
Ø 2.00 min.
1.5 ± 0.1
+ 0.3
12.00 - 0.1
3
2
4°
0.76 R
4.7 2 ± 0.1
2.6 6 ± 0.1
1.50 + 0.1
4.7 2 ± 0.1
typ. 4.30
1.50 + 0.25
8.0 0 ± 0.1
1.50 + 0.25
8°
8.0 0 ± 0.1
2.0 0 ± 0.05
4.0 0 ± 0.1
+0.3
0.318 - 0.1
+ 0.3
12.00 - 0.1
+ 0.3
12.00 - 0.1
4
1.75 ± 0.1
2.0 0 ± 0.05
5.5 0 ± 0.05
with the part rotated by 180°. To order this version, the
2 1
7.33 ± 0.1 by the numerial “3”
tape and reel suffix “T” is augmented
Dimensions in millimeters (inches)
+ 0.3
0.318 - 0.1
Vishay Semiconductors
TAPE AND REEL PACKAGING 4 PIN MINIFLAT, 180° ROTATION
Rev. 2.2, 06-Oct-11
Document Number: 837145.65 ± 0.1
13
For technical questions, contact: [email protected]
5.5 ± 0.1
8.00 ± 0.1
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
12 ± 0.3
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
SECTION Y - Y
X
X
32.00 ± 0.3
Ø 1.6
4.25
28.40 ± 0.1
10.6
16
Fig. 18 - Tape Dimensions
Note: 3000 parts per reel
A
Y
16.00 ± 0.1
7.60 ± 0.1
3.0 ref.
R 0.75
0.20 ± 0.05
DETAIL A
SCALE 3 : 1
Drawing-No.: 9.700-5373.0-3
Note:
400 parts per reel
SECTION X - X
HV Package (CNY65S)
Note: 3000 parts per
Fig.reel
17 - Tape Dimensions
Document Number: 83714
14
For technical2.00
questions,
contact: [email protected]
4.00 ± 0.1
± 0.15
+ 0.10
0.40 ± 0.05
THIS DOCUMENT
IS SUBJECT
TO CHANGE
WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
Ø 1.50 0.00
Y
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
1.75 ± 0.1
Rev. 2.2, 06-Oct-11
5.65 ± 0.1
8.00 ± 0.1
SECTION Y - Y
14.20 ± 0.1
20.80 ref.
18.10 ± 0.1
Ø 2.00 min.
X
X
32.00 ± 0.3
2.45 ± 0.1
0.3 ± 0.05
28.40 ± 0.1
8 ± 0.1
A
Y
9.90 ± 0.1
16.00 ± 0.1
5 ref.
R 0.75
0.20 ± 0.05
Drawing-No.:400
9.700-5374.0-3
Note:
parts per reel
Issue: preliminary; 26.01.11
Brochure Type
46/58
DETAIL A
SCALE 3 : 1
SECTION X - X
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Product Marking
Consult datasheet for the marking details.
Application Examples
Optocoupler with Phototransistor Output
Phototransistor wired to a collector resistor
IF
VCC
Phototransistor wired to a collector resistor
VCC
IL
RV
IF
RL
IC
IIL
VCC
VCC
RV
IIH
Ring Line
IL
RL
IC
IIL
IIH
TTL
TTL
TTL
TTL
VIL, VIH
+
0
–
VIL, VIH
Optocoupler with AC input
Phototransistor wired to a collector resistor
IF
VCC
Phototransistor wired to a collector resistor
VCC
IL
RV
IF
RL
IC
IIL
VCC
VCC
IL
RV
IIH
RL
IC
IIL
IIH
TTL
TTL
Brochure Type
TTL
TTL
VIL, VIH
47/58
VIL, VIH
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Linear
3
+
Va
7
+
VCC
Vin
Vb
2
IL300
1
1 kΩ
8
6
U1
I
–
2
F
K1
4
IP1
4
6
IP1
+
VCC
6
U2
VCC 2
5
IP2
7
3
7
3
VCC
R1
K2
–
Vout
R1
10 kΩ
Vin
IF
6
OP-07
2 –
3
2
IL300
8
2
K2
7
K1
4
R2
GND
1
3
IP1
- Voltage
4
IP2
R2
10 kΩ
6
IP1
5
IP2
2
3
Isolated Line
+
IL300
1
100Ω
+15 V
Vin
–
OP-07
6
Vout
+
2N3906
6
U1
OP90
–
100pF
R1
2
3
K1
4
Sensor Input
GND
+
3
GND
IP1
K2
IP2
8
7
6
3 +
5
2
7
6
U2
LM10
–
+
4
Output
Io
R4
R3
–
Sensor Connection
High Speed
SFH6701/11
SFH6700/19
VDD
1 NC
R1
TTL/
Data LS TTL
IN LOGIC
2
VCC 8
1 NC
Out
7
2
VE 6
3
3
GND
Out
VCC
TTL/
LS TTL
INPUT
7
NC 6
Data
Out
0.1 µF
GND
GND 5
4 NC
GND 5
4 NC
VCC 8
17851
Fig. 2 - Series LED Drive
Data
IN
18014
SFH6700/19
VDD
1 NC
R1
Open
Collector
Drain
2
1 NC
V CC 8
Out
7
2
NC 7
VE 6
3
Out 6
3
GND
4 NC
SFH6705
VCC 8
4 NC
GND 5
GND
VCC
0.1 µF
Rp
Data
Out
CMOS
Input
GND
5
17856
Phototriac Non-Zero Crossing
R
270 Ω
+5V
MT 1
S
0
Vcc1
Rloa d
1
M
2
Snubber
circuit
IF
a1
b1
a2
b2
uicro
3
a3
b3
a4
b4
5
Tr igger_+
S
0.1 µF
V
AC
AC
Line
POWER
TRIA C
DC
trigger
V
TTL
MT
Trigger_ -
_+
Trigger
7
4
C
Trigger
6
8
_-
Non-zero
crossing
TRIAC
IL420
Motor
Contactor
Electric Motor
Drive
AC Line
IL410/42 0
Rg
Galvanical separation
18134
TRIAC driver example
NZC TRIAC - Lower Peak I
MT 2
19691
TRIAC driver
basic SSR
Trigger_+
RL
TRIAC Driver Basic SSR
DC
trigger
AC
line
Trigger_-
IL420
Non zero crossing example
19687
Brochure Type
48/58
NZC TRIAC Waveforms
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Current
Waveform
Current waveform
2
Complete Product Por tfolio
Triggersignal
Signal
Trigger
1
Max di/dt
Line Voltage
voltage
Line
Max dV/dt
3
Phototriac Zero Crossing
1
2 10 ms 10.0 mV3 10 ms 50 V
10 ms 5.0 V
Trigger_+
RL
ZC
DC
trigger
DC
trigger
-
IL410
Trigger_Zero crossing example
Motor-L
Trigger +
+
AC
line
Rsnb AC
Line
ZC
Csnb
Trigger Discrete Solution
Inductive Load with Snubber
ZC TRIAC Waveforms
Powertriac
Discrete Solution
Integrated Solution
Integrated Solution
Solid-State Relay (SSR)
+5V
RD
OH
3
2
R2
Pulse mode
4
Off hook
S1
Ring
detect
Fuse
300 V
SIDACtor
or TRISIL
DC
Holding
circuit
5
Tip
Fuse
C1
Ringdet
MOSFET Driver
6
7
8
C2
Z1 Z2
TECCOR
SIDACtor
P3100EA70
orequivalent
T1
Hybrid
Hybrid
IN4148
B
(ring)
Ring
detect
R1
Hook control/
dial pulse
LH1529
A
(tip)
+5V
R IN
620 Ω
S2
LH1532
Isolated
circuitry
1
Z3
DC termination
Ring
17367
17388
+ VDC
+ VDC
VCC
Rgate
VCC
VDD
NC
A
VO
C
GND
+
High Voltage
DC
-
0.1 µF
VO
Load
A
Shield
Open
collector
Control
input
NC
RIN
Vout
0.1 µF
Shield
VIN
VO
Rgate
NC
- VDC
C
Boost Converter Application
VO
NC
VEE
- VDC
Recommended LED Drive Circuit
for High CMTR Performance
Open
collector
RIN
Floating supply
NC
A
VO
6
C
GND 1
0.1 µF
Shield
Control
input
+ High Voltage
DC
VCC1
VIN
Rgate
VCC
VO
VCC4
VIN
Open
collector
GND 1
RIN
_
NC
A
C
Shield
Control
input
Q2
SUD50N04
3-Phase
AC
NC
VO
Rgate
R1
1 MΩ
RL
+
0.1 µF
- High Voltage
DC
VO
_
+
NC
3-Phase Motor Drive Application
Note
• The value for RIN is dependent upon VIN, the desired LED input current (IF), and input forward voltage (VF).
VO1263
MOSFET DC Relay Schematic
Brochure Type
49/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
p.
Pin one ID
V I S H AY I N T E R T E C H N O L O G Y, I N C .
ISO method A
3
Optocouplers
4
4.55
4.83
Complete Product Por tfolio
7.62 typ.
0.79 typ.
0.76
1.14
1.27 typ.
3.30
3.81
10°
4°
typ.
DIP-4
2
1
0.508
0.89
0.46
0.56
i178027
5.84
6.35
2.79
3.30
0° to 15°
0.2
0.3
1.27
2.54
0.76
Pin one ID
R 0.25
2.54
6.486.81
6.816.48
1.78
1.52
8 min.
ISO method A
11.05
Pin 1 identification
4.83
4
9.52
10.03
4.55
4.55
7.62 typ.
4.83
1.14
10°
0.508
0.89
0.890.51
typ .
0° to 15°
Option
2.54
10.36
9.96
7.8
7.4
0.79 typ.
10.16
10.92
3.30
3.81
2.54 typ.
0.76
6
R 0.25
Option 7
11.05
4.6
4.1
0.7
10°
0.51
1.02
0.76
0.25 typ. R0.25
pin one ID
1.52
8 min.
11.05
3° to 7°
0.508
1.020
0.76
1.78
1.52
8 min.
11.05
8 min.
15° max.
R0.25
2.54
1.78
2.54
i178029
0.30 typ.
8.4 min.
10.3 max.
2.54
Lead
coplanarity
0.004 max.
0.102
0.249
8 min.
7.52
7.90
0.35
0.25
0.249
0.102
2.54 typ.
9.53
10.03
7.62 ref.
1.52
8 min.
3° to 7°
Option 9 or SFH6186
1.78 7.62 typ.
ISO method A
1.27 typ.
8 min.
0.508
1.020
Lead
coplanarity
0.004 max.
1.27 typ.
i178029
9.52
10.03
4° typ.
0.25 typ.
0.249
0.102
4° typ.
2.79
0.2
0.3
0.25 typ.
2.54
2.67
2.41
0.76
1.14
5.84
6.35
6.35
5.84)
2.79
3.303.30
0° to 15°
1.27
i178027-1
10°
ISO method A
3.81
3.30
1.320.46
1.220.56
7.52
7.90
0.79 typ.
3.30
3.81
3.30
3.81
4°
typ.4°
i178027
10 °
1.27 typ.
0.84
0.74
1.14
0.76
0.76
1.14
ISO Method A
7.62 typ.
0.79 typ.
0.76
0.76
3
R0.25
1.52
9.95 min.
1.78
6.48
6.81
13
3
6.5 ± 0.3
4
4.55
4.83
0.76
1.14
ISO method A
6.5 ± 0.3
Pin 1 identifier
0.79 typ.
7.62 typ.
7.62 to 9.5
4.58 ± 0.3
7.62 typ.
Pin 1 identifier
3.30
3.81
4.58 ± 0.3
0.25 ± 0.1
0.4 ± 0.1
3.5 ± 0.3
7.62 to 9.5
7.62 typ.
0.4 ± 0.1
3.5 ± 0.3 4.5 ± 0.3
0.249
0.102
4° typ.
2.54 typ.
9.27 min.
12.1 max.
3.5 ± 0.3 4.5 ± 0.3
1.27 typ.
0.5 ± 0.1
1.3 ± 0.1
i178027-11
Option 6
6.5 ± 0.3
Pin 1 identifier
0.4 ± 0.1
7.62 typ.
0.25 typ.
2.54 typ.
Option 8
Option 9
Option 6
10.3 max.
Option
9
7.62 typ.
7.62 typ.
7.62 typ.
7.62 typ.
10.3 max.
3.5 ± 0.3
0.6 min.
0.1 min.
3.5 ± 0.3
0.6 min.
0.1 min.
4.3 ± 0.3
8 min.
10.3 max.
8 min.
2.7 min.
10.16 typ.
7.62 typ.
Option 7
7.62 typ.8
Option
7.62 to 9.5
0.4 ± 0.1
0° to 15°
2.54 typ.
0.5 ± 0.1
7.62 typ.7
Option
2.7 min.
7.62 to 9.5
4.58 ± 0.3
0.25 typ. 2.8 ± 0.5
7.62 typ.
6.5 ± 0.3
Pin 1 identifier
4.58 ± 0.3
i178027-11
2.8 ± 0.5
0° to 15°
1.3 ± 0.1
DIP-4 Alternative Package
min.
4.30.6
± 0.3
0.25 ± 0.1
0.25 ± 0.1
0.6 min.
10.3 max.
9.27 min.
3.5 ± 0.3
0.1 ± 0.1
3.5 ± 0.3
0.1 ± 0.1
7.62 typ.
3.6 ± 0.3
3.6 ± 0.3
12.1 max.
9.27 min.
0.6 min.
8 min.
12.1 max.
0.6 min.
8 min.
2.54 typ.
Option 7 code: 24
Factory
Option 7
Option 6
7.62 typ.
7.62 typ.
7.62 typ.
Brochure
Type
0.6 min.
0.6 min.
4.3 ± 0.3
3.5 ± 0.3
3.5 ± 0.3
0.1 min.
10.16 typ.
0.1 min.
8 min.
0.6 min.
1.52
Option 8
7.62 typ.
0.25 ± 0.1
0.25 ± 0.1
4.3 ± 0.3
9.27 min.
Option 9
Option 8
10.3 max.
7.62 typ.
3.5 ± 0.3
9.27 min.
7.62 typ.
0.1 ± 0.1
3.5 ± 0.3
0.1 ± 0.1
11.05
13.0
1.52
1.52
R 0.25
7.7
R 0.25
11.05
7.7
11.05
0.76
2.54
2.54
0.76
2.54
1.52
R 0.25
9.95 min.
R 0.25
13.0
9.95 min.
1.780.76
0.25 typ.
2.54 typ.
1.52
1.78 0.76
0.5 ± 0.1
R 0.25
8 min.
R 0.25
11.05
8 min.
1.52
1.78
i178027-11
2.8 ± 0.5
0° to 15°
0.25 typ.
1.78
0.5 ± 0.1
i178027-11
0° to 15°
1.3 ± 0.1
2.54
2.8 ± 0.5
1.3 ± 0.1
1.78 0.76
2.54
4.5 ± 0.3
2.54
3.5 ± 0.3 4.5 ± 0.3
3.5 ± 0.3
0.76
10.16 typ.
2.7 min.
yp.
1
6.48
6.81
1.78
n6
2
Option 9
10.3 max.
7.62 typ.
3.6 ± 0.3
50/58
3.6 ± 0.3
VMN-PL0475-1410
0.6 min.
8 min.
THIS DOCUMENT
IS
SUBJECT
TO CHANGE WITHOUT
NOTICE.
THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
10.3 max.
0.6 min.
8 min.
12.1 max.
10.3 max.
0.6 min.
8 min.
12.1 max.
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
DIP-4 Alternative Package
1.2 ± 0.1
4
3
7.62 ± 0.3
Option 6
Option 7
7.62 typ.
7.62 typ.
6.5 ± 0.5
3.5 ± 0.3
1
+ 0.25
- 0.3
0.35
3.5 ± 0.3
0.1 min.
2
0.85 ± 0.1
10.16 ± 0.3
10.16 typ.
3.5 ± 0.3
7.62 to 9.98
1.78
0.5 typ.
1.52
3.3 ± 0.5
2.8 ± 0.5
R 0.25
2.54
1.2 ± 0.1
0.76
0.85 ± 0.1
0.6 min.
8 min.
2.7 min.
0.26
4.58 ± 0.5
8 min.
11.05
0.5 ± 0.1
2.54 ± 0.25
Factory code: 25
2.54 nom.
3
Recommended Footprint
2.54
PIN
ONE I.D.
0.5 ± 0.15
1.15
Leads coplanarity 0.1 max.
5.1
7.4
2
1
0.9
0.41 ± 0.1
4
4.57 ± 0.25
0.2 ± 0.05
4.42 ± 0.25
6.95 ± 0.25
5.35 typ.
0.05 ± 0.05
4.92 max.
2.12 ± 0.2
SOP-4
SOP-4
2.54 ± 0.25
0.10 ± 0.1
0.40 ± 0.1
7.00
3
Pin
one ID
+ 0.2
- 0.7
2.54
0.8
1
4.40 ± 0.2
2.00 ± 0.2
5.30 ± 0.3
0.2 ± 0.05
4
3.85 ± 0.3
6.5
1
2
Factory code: 25
Brochure Type
51/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
LSOP-4
2.54 nom.
4
10.20
Possible footprint
7.50 ± 0.20
0.90
2.54
0.20 +- 0.10
0.05
2.00
3.80
0.10 ± 0.10
2.30 max.
4.10 max.
3
+ 0.30
- 0.40
0.45 ± 0.1
0.70
8.20
10.80
+ 0.30
- 0.40
1
2 Pin no. 1
identification
SSOP-4
+ 0.3
4
7 - 0.4
3
1.9
1.27
0.9
Possible footprint
4.4 ± 0.2
0.1 ± 0.1
2.5
5
+ 0.3
0.7 - 0.4
7.6
0.05
0.45 ± 0.1
0.15 +- 0.10
2.1 max.
2.8 max.
1.27 nom.
1
2
Pin no. 1
identification
SSOP-4 Alternative Package
1.27 ± 0.25
7.0
+ 0.2
- 0.7
0.9
4.4 ± 0.2
0.4 ± 0.1
Possible Footprint
1.27
5.3 ± 0.3
0.2 ± 0.05
0.12 ± 0.1 2.0 ± 0.2
2.6 ± 0.3
5.0
7.5
Factory code: 25
HV DIP-4
14.4 ± 0.3
Recommended footprint
7.2 ± 0.2
15.9
6 ± 0.2
0.4 ± 0.1
2.1 ± 0.5
Cathode
Emitter
2.9
Z
Collector
5.08
9
Anode
7.05 ± 0.4
12.8 ± 0.2
0.5 ± 0.2
5.08 ± 0.4
Leads coplanarity
0.1 max.
Brochure Type
Z 10:1
52/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
HV DIP-4 (cont’d)
CNY64
12.8 ± 0.1
4
5
0.
0.
6.01 ± 0.1
7.2 ± 0.1
9.1 ± 0.3
A
Coll
E
Cath
10.16 ± 0.2
5.08 ± 0.2
CNY64S
15.9
14.4 ± 0.3
9
7.05 ± 0.4
0.4 ± 0.1
Z
0.5 ± 0.2
Anode
Collector
Cathode
Z 10:1
2.9
6 ± 0.2
12.8 ± 0.2
5.08
7.2 ± 0.2
Emitter
Recommended footprint
2.1 ± 0.5
5.08 ± 0.4
Leads coplanarity
0.1 max.
CNY65
4
0.
17.8 ± 0.1
5
0.
6.1 ± 0.1
9.6 ± 0.1
9.1 ± 0.3
A
Coll
Cath
E
15.24 ± 0.2
7.62 ± 0.2
CNY65S
20.9
19.4 ± 0.3
14
17.8 ± 0.2
Anode
7.62
7.15 ± 0.4
0.4 ± 0.1
Cathode
Z
0.5 ± 0.2
Z 10:1
Collector
Emitter
2.9
6.1 ± 0.2
9.6 ± 0.2
Recommended footprint
2.1 ± 0.5
7.62 ± 0.4
Leads coplanarity
0.1 max.
CNY66
4
0.
5
0.
A
9.1 ± 0.3
20.4 ± 0.1
6.1 ± 0.1
9.6 ± 0.1
7.62 ± 0.2
Brochure Type
Cath
Coll
E
17.8 ± 0.2
53/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
SOP-5
0.61
0.86
40°
0.46
0.33
6°
1.335
1.205
1.27
4.83
4.32
0.63
0.38
1
7.21
6.71
1.335
1.205
2.67
2.41
R 0.25
1.27
0.91
Leads coplanarity
0.10 max.
0.46
0.36
4
0.36
10°
0.20
0.10
2.03
1.91
5
6
5.59
5.08
5.08
7.37
3
2.54
1.14
Pin one I.D. (on chamfer side of package)
4.67
4.17
LSOP-5
2.54 nom.
1.27 nom.
4
5
3
Possible footprint
7.50 ± 0.20
2.00
1
0.45 ± 0.1
0.70
8.20
0.90
+ 0.10
- 0.05
0.10 ± 0.10
3.80
+ 0.30
- 0.40
2.54
10.20
0.20
2.30 max.
4.10 max.
2
+ 0.30
- 0.40
10.80
Pin no. 1
identification
DIP-6
7.62 typ.
1.2 ± 0.1
1 min.
3
3.555 ± 0.255
0.5 ± 0.05
4
0.25 typ.
3° to 9°
6
8.6 ± 0.1
7.62 to 8.81
Option 6
Option 7
Option 9
7.62 typ.
7.62 typ.
10.3 max.
2.54 typ.
5
Pin one ID
2.95 ± 0.5
0.8 min.
0.85 ± 0.05
1
6.4 ± 0.1
18°
4° typ.
2
7.62 typ.
3.5 ± 0.3
0.7 min.
4.3 ± 0.3
0.1 ± 0.1
3.6 ± 0.3
0.1 min.
8 min.
2.55 ± 0.25
0.6 min.
10.3 max.
0.6 min.
8 min.
10.16 typ.
0.76
0.76
R 0.25
2.54
R 0.25
2.54
1.78
8 min.
11.05
1.78
1.52
1.52
8 min.
11.05
DIP-6 Alternative Package
7.3 ± 0.5
7.62 ± 0.3
6
1.1 ± 0.1
5
4
Option 6
Option 7
7.62 ± 0.3
7.62 ± 0.3
3.5 ± 0.3
0.76
6.5 ± 0.5
0.5 typ.
1.0 ± 0.25
2.3 ± 0.5
1
0.5 ± 0.1
2.54 ± 0.25
2
8 min.
11.05
1.52
10.15 ± 0.3
3
10.16 ± 0.5
0.26
7.62 to 9.98
R 0.25
1.78
6.9 ± 0.5
3.3 ± 0.5
2.8 ± 0.5
2.54
0.26
0.26
Factory code: 25
Brochure Type
54/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
DIP-8
Option 6
Option 7
10.36
9.96
7.62 typ.
0.95 ± 0.19
0.79
4° typ.
4
3.555 ± 0.255
3
7.8
7.4
7.62 typ.
Pin one ID
1
2
0.7
6.645 ± 0.165
1.27
5
0.70 ± 0.19
0.51 ± 0.05
4.6
4.1
6.095 ± 0.255
7
6
10°
8
3° to 9°
2.54 typ.
9.77 ± 0.14
0.76
0.35
0.25
1.78
8 min.
11.05
8.4 min.
10.16
10.92
0.25 ± 0.05
R 0.25
2.54
8 min.
3.045 ± 0.255
1.52
10.3 max.
DIP-8 Alternative Package
Option 7
9.68 ± 0.5
7.62 ± 0.3
7.62 ± 0.3
3.5 ± 0.5
1.25 ± 0.1
7
6
5
6.5 ± 0.5
2.54
0.35 ± 0.25
0.26
0.5 typ.
1.0 ± 0.25
10.16 ± 0.3
3.3 ± 0.5
2.8 ± 0.5
8
1
2
3
1.50
1.30
10.3
4
0.26
0.5 ± 0.1
2.54 ± 0.25
7.62 to 9.98
Factory code: 24
DIP-8 (6)
0.76
1.14
3.30
3.81
4
3
5
6
2
1
6.48
6.81
1.27
0.46
0.56
7.62 typ.
Pin one ID
0.79
4° typ.
0.51
0.89
2.54 typ.
10°
8
2.79
3.30
3° to 9°
5.84
6.35
0.2
0.3
9.63
9.91
SOIC-8 (1 channel)
0.38 ± 0.05
40°
C L 3.91 ± 0.13
6.10
1.27
0.36
0.91
5° max.
1.27 typ.
R 0.25 max.
0.51 ± 0.10
2 places
0.53
R 0.13
1.49 ± 0.13
3.18 ± 0.13
0.20
0.1
0.2
3.05 ± 0.13
7°
4.88 ± 0.13
Lead coplanarity
± 0.04 max.
0.41
Pin one ID
1.14
4.32
6.6
SOIC-8 (2 channel)
5.84 ± 0.05
0.38 ± 0.05
40°
7°
1.49 ± 0.05
3.05 ± 0.05
R 0.13
1.27
5° max.
0.1
0.2
1.02
Brochure Type
1.27 typ.
0.20
0.51 ± 0.10
2 plcs.
3.18 ± 0.05
CL
6.10
0.91
4.32
6.6
R 0.25 max.
Lead coplanarity
± 0.001 max.
0.36
3.91 ± 0.05
Pin one ID
55/58
1.14
0.41
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
SOP-8
7.65
7.14
0.43
0.33
1.19
0.94
Pins
6 and 7
3° to 7°
2.3
2.1
1.02
0.91
0.41
typ.
1.27
typ.
R 0.25
40 °
5.7
5.5
10°
typ.
all 8 sides
0.15
2.18
8.79
8.3
1.27
0.36
0.91
6.76
9.04
5.84
5.69
1.14
DIP-16
yp.
0.76
1.14
Pin one ID
8
6
5
4
3
2
1
9
10
11
12
13
14
15
4°
16
2.54 typ.
3° to 9°
1.27
Option 7
Option 9
7.62 typ.
9.53
10.03
5.84
2.79 6.35
3.30
10°
typ.
0.51
0.89
0.46
0.56
19.77
20.07
0.20
0.30
7.62 typ.
3.30
3.81
6.48
6.81
5.84
2.79 6.35
3.30
.
7
0.79
8
7
6
5
4
3
9
10
11
12
13
14
19.77
20.07
0.20
0.30
7.62 ref.
0.7
4.6
4.1
8 min.
0.102
0.249
0.25 typ.
0.51
1.02
8.4 min.
8 min.
15° max.
10.3 max.
0.76
R 0.25
2.54
1.78
0.76
2.54
1.52
8 min.
11.05
R 0.25
1.78
8 min.
11.05
1.52
SSOP-16
R0.25
5.59
5.08
0.43
0.33
0.87
0.61
1.40
1.14
Brochure Type
10°
0.20
0.10
2.03
1.91
0.46
0.36
40°
0.00
0.13
4.83
4.32
0.36
1.27
5.08
5.59
7.11
6.60
11.02
10.52
56/58
0.91
5.08
7.37
1.14
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
Reference Product Literature
• 4 Pin optocouplers with low input current product sheet
www.vishay.com/doc?49168
• Optical isolation for solar power applications guide
www.vishay.com/doc?49185
• Phototriac selector guide
www.vishay.com/doc?49828
• High-speed SSRs selector guide
www.vishay.com/doc?49444
• S
olid state relays (SSR) selector guide
www.vishay.com/doc?49538
• P
hotovoltaic MOSFET driver with integrated fast turn-off selector guide
www.vishay.com/doc?49261
• P
hotovoltaic single-component/isolated MOSFET driver solutions guide
www.vishay.com/doc?49262
Brochure Type
57/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
Optocouplers
Complete Product Por tfolio
WORLDWIDE SALES CONTACTS
THE AMERICAS
UNITED STATES
VISHAY AMERICAS
ONE GREENWICH PLACE
SHELTON, CT 06484
UNITED STATES
PH: +1-402-563-6866
FAX: +1-402-563-6296
ASIA
SINGAPORE
EUROPE
VISHAY INTERTECHNOLOGY ASIA PTE LTD.
37A TAMPINES STREET 92 #07-00
SINGAPORE 528886
PH: +65-6788-6668
FAX: +65-6788-0988
GERMANY
P.R. CHINA
VISHAY CHINA CO., LTD.
15D, SUN TONG INFOPORT PLAZA
55 HUAI HAI WEST ROAD
SHANGHAI 200030
P.R. CHINA
PH: +86-21-22315555
FAX: +86-21-22315551
VISHAY ELECTRONIC GMBH
DR.-FELIX-ZANDMAN-PLATZ 1
95100 SELB
GERMANY
PH: +49-9287-71-0
FAX: +49-9287-70435
FRANCE
VISHAY S.A.
199, BD DE LA MADELEINE
06003 NICE, CEDEX 1
FRANCE
PH: +33-4-9337-2727
FAX: +33-4-9337-2726
JAPAN
VISHAY JAPAN CO., LTD.
SHIBUYA PRESTIGE BLDG. 4F
3-12-22, SHIBUYA
SHIBUYA-KU
TOKYO 150-0002
JAPAN
PH: +81-3-5466-7150
FAX: +81-3-5466-7160
Brochure Type
UNITED KINGDOM
VISHAY LTD.
SUITE 6C, TOWER HOUSE
ST. CATHERINE’S COURT
SUNDERLAND ENTERPRISE PARK
SUNDERLAND SR5 3XJ
UNITED KINGDOM
PH: +44-191-516-8584
FAX: +44-191-549-9556
58/58
VMN-PL0475-1410
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC
DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000