UNISONIC TECHNOLOGIES CO., LTD U12JZ47/A TRIAC HIGH COMMUTATING TRIAC DESCRIPTION The U12JZ47/A is a bi-directional, silicon planar type triac in full plastic pack for AC power control applications. FEATURES 1 * Repetitive Peak off-State Voltage: VDRM = 400, 600V * R.M.S On-State Current: IT (RMS) = 12A * High Commutating (dv / dt) * Isolation Voltage: VIsol = 1500V AC ORDERING INFORMATION Ordering Number Package Lead Free Halogen Free U12JZ47L-x-TF3-T U12JZ47G-x-TF3-T TO-220F U12JZ47AL-x-TF3-T U12JZ47AG-x-TF3-T TO-220F Note: Pin Assignment: MT1: Terminal 1 MT2: Terminal 2 G: Gate TO-220F Pin Assignment 1 2 3 MT1 MT2 G MT1 MT2 G Packing Tube Tube MARKING U12JZ47 www.unisonic.com.tw Copyright © 2014 Unisonic Technologies Co., Ltd U12JZ47A 1 of 5 QW-R401-025.C U12JZ47/A TRIAC ABSOLUATE MAXIUM RATINGS PARAMETER SYMBOL U12JZ47-4 U12JZ47A-4 U12JZ47-6 U12JZ47A-6 Repetitive Peak Off-State Voltage and Repetitive Peak Reverse Voltage RATINGS UNIT 400 VDRM V 600 RMS On-State Current IT (RMS) 12 (Commercial Frequency, Full Sine Waveform TC = 72°С) 120 50Hz Peak One Cycle Surge On-State Current ITSM (Non-Repetitive) 60Hz 132 I2t Limit Value I2t 72 Critical Rate of Rise of On-State Current (Note) di / dt 50 Peak Gate Power Dissipation PGM 5 Average Gate Power Dissipation PG (AV) 0.5 Peak Gate Voltage VGM 10 Peak Gate Current IGM 2 Junction Temperature TJ 125 Storage Temperature Range TSTG -40 ~ +150 Isolation Voltage (AC, t = 1min.) VIsol 1500 Note: di/dt test condition VDRM=0.5×Rated, ITM≦17A, tGW≧10μs, tGR≦250ns, IGP=IGT×2.0. A A2s A/µs W V V A °С °С V THERMAL DATA PARAMETER Thermal Resistance Junction to Case A SYMBOL θJC RATINGS 3 UNIT °С /W ELECTRICAL CHARACTERISTICS (TA= 25°С, unless otherwise specified) PARAMETER Gate Trigger Voltage U12JZ47 Gate Trigger Current U12JZ47A SYMBOL I II III IV I II III IV I II III IV Peak On-State Voltage Gate Non-Trigger Voltage Repetitive Peak Off−State Current Holding Current U12JZ47 Critical Rate of Rise of Off-State Voltage U12JZ47A Critical Rate of Rise of U12JZ47 Off-State Voltage at U12JZ47A Commutation VGT IGT VTM VGD IDRM IH dv / dt (dv / dt) c TEST CONDITIONS MT2 (+), Gate (+) MT2 (+), Gate (-) VD = 12V RL = 20Ω MT2 (-), Gate (-) MT2 (-), Gate (+) MT2 (+), Gate (+) MT2 (+), Gate (-) MT2 (-), Gate (-) MT2 (-), Gate (+) VD = 12V RL = 20Ω MT2 (+), Gate (+) MT2 (+), Gate (-) MT2 (-), Gate (-) MT2 (-), Gate (+) ITM = 17A VD = Rated, TC = 125°С VDRM = Rated VD = 12V, ITM = 1A VDRM = Rated, TJ = 125°С Exponential Rise VDRM = 400V, TJ = 125°С (di / dt) c = -6.5A / ms UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX UNIT 1.5 1.5 V 1.5 30 30 30 20 20 20 1.5 0.2 20 50 300 200 10 4 mA V V µA mA V/µs V/µs 2 of 5 QW-R401-025.C U12JZ47/A TRIAC TYPICAL CHARACTERICS 50 GATE VOLTAGE, V G (V) 30 VGM= 10V P GM= 5W 10 PG(AV) = 0.5W 5 3 -40℃ VGT IGM= 2A 25℃ VGT 1 0.5 IGT(U12JZ47A) IGT(U12JZ47) 0.3 0.1 1 VGD= 0.2V IGT(U12JZ47A) IGT(U12JZ47) 3 100 300 1000 3000 10 30 SURGE ON-STATE CURRENT, ITSM (A) GATE TRIGGER CHARACTERISTIC RATED SURGE ON - STATE CURRENT 160 140 120 100 60Hz 50 80 60 40 3 1 10 30 CONDUCTION TIME (CYCLES AT 50Hz AND 60Hz) GATE CURRENT, I G (mA) 50 100 MAXIMUM ON-STATE POWER DISSIPATION 28 MAXIMUM ON-STATE CHARACTERISTICS ON - STATE POWER DISSIPATION, PT (AV) (W) ON-STATE CURRENT, IT (A) 30 10 5 3 Tj = 125℃ 25 1 0.5 0.3 0.8 1.2 1.6 2.0 2.4 2.8 8 0 3.2 0 2 4 6 10 12 14 16 RMS ON - STATE CURRENT, I T (RMS) (A) ALLOWABLE CASE TEMPERATURE VS. RMS ON-STATE CURRENT ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT 160 120 100 80 60 360° 40 CONDUCTION RESISTIVE, 20 INDUCTIVE LOADS MAXIMUM ALLOWABLE AMBIENT TEMPERATURE, Ta MAX. (℃) 1 140 2 4 6 8 10 12 14 16 RMS ON - STATE CURRENT, I T (RMS) (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 3 120 4 5 100 NO HEAT SINK 30×30×2mm A HEAT SINK 50×50×2mm A HEAT SINK 70×70×2mm A HEAT SINK 100×100×2mm A HEAT SINK SILICON GREASE COAT. 80 60 40 20 0 0 8 GATE VOLTAGE , V T (V) 140 MAXIMUM ALLOWABLE CASE TEMPERATURE, Tc MAX. (℃) 20 360° CONDUCTION 16 RESISTIVE, INDUCTIVE 12 LOADS 4 0.1 0.4 0 24 1 0 2 2 3 4 4 6 5 8 10 12 RMS ON - STATE CURRENT, I T (RMS) (A) 3 of 5 QW-R401-025.C U12JZ47/A TRIAC ■ TYPICAL CHARACTERICS (Cont.) VGT (Tc) / VGT (Tc = 25℃) - Tc (TYPICAL) IGT (Tc) / IGT (Tc = 25℃) - Tc (TYPICAL) VD = 12V RL = 20Ω 2 IGT (Ⅲ) 1 IGT (Ⅰ, Ⅱ ) 0 -40 1.0 0.6 0.2 -40 0 40 120 80 CASE TEMPERATURE, Tc (℃) IH (Tc) / IH (Tc = 25℃) 2.4 1.6 0.8 0 -40 0 40 80 120 CASE TEMPERATURE, Tc (℃) TRANSIENT THERMAL IMPEDANCE, θJC (℃/W) IH (Tc) / IH (Tc = 25℃) - Tc (TYPICAL) ITM = 1A VD = 12V VD = 12V RL = 20Ω 1.4 VGT (Tc) / VGT (Tc = 25℃) IGT (Tc) / IGT (Tc = 25℃) 3 10 0 40 120 80 CASE TEMPERATURE, Tc (℃) TRANSIENT THERMAL IMPEDANCE (JUNCTION TO CASE) 5 3 1 0.5 0.3 0.1 0.001 0.01 0.1 1 10 100 TIME, t (s) PULSE TRIGGER CHARACTERISTIC (TYPICAL) 100 RESISTANCE LOAD VD = 12v RL= 20Ω Tc= 25℃ RECTANGULAR WAVEFORM 50 IGT(tw)/IGT 30 10 5 IGT (Ⅱ) 3 1 IGT (Ⅲ) IGT tw IGT (Ⅰ) 0.5 1 3 10 30 100 300 GATE TRIGGER PULSE WIDTH, t w (μs) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 of 5 QW-R401-025.C U12JZ47/A TRIAC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 of 5 QW-R401-025.C