UNISONIC TECHNOLOGIES CO., U12JZ47/A TRIAC HIGH COMMUTATING TRIAC DESCRIPTION The U12JZ47/A is a bi-directional, silicon planar type triac in full plastic pack for AC power control applications. FEATURES * Repetitive Peak off-State Voltage: VDRM = 400, 600V * R.M.S On-State Current: IT (RMS) = 12A * High Commutating (dv / dt) * Isolation Voltage: VIsol = 1500V AC 1 TO-220F *Pb-free plating product number: U12JZ47L/U12JZ47AL PIN CONFIGURATION PIN 1 2 3 PIN NAME MT1 MT2 Gate DESCRIPTION Terminal 1 Terminal 2 Gate Terminal ORDERING INFORMATION Ordering Number Pn/Sn Lead free U12JZ47-TF3-T U12JZ47L-TF3-T U12JZ47A-TF3-T U12JZ47AL-TF3-T www.unisonic.com.tw Copyright © 2005 Unisonic Technologies Co., Package Packing TO-220F Tube 1 QW-R401-025,A U12JZ47/A TRIAC ABSOLUATE MAXIUM RATINGS PARAMETER SYMBOL U12JZ47-4 U12JZ47A-4 U12JZ47-6 U12JZ47A-6 Repetitive Peak Off-State Voltage and Repetitive Peak Reverse Voltage RMS On-State Current (Commercial Frequency, Full Sine Waveform TC = 72℃) Peak One Cycle Surge On-State Current (Non-Repetitive) 50Hz 60Hz RATINGS UNIT 400 VDRM V 600 12 IT (RMS) A 120 132 I2t Limit Value I2t 72 Critical Rate of Rise of On-State Current (Note *) di / dt 50 Peak Gate Power Dissipation PGM 5 Average Gate Power Dissipation PG (AV) 0.5 Peak Gate Voltage VGM 10 Peak Gate Current IGM 2 Junction Temperature TJ 125 Storage Temperature Range TSTG -40 ~ +150 Isolation Voltage (AC, t = 1min.) VIsol 1500 Note: * di/dt test condition VDM=0.5×Rated, ITM≦17A, tgw≧10µs, tgr≦250ns, igp=IGT×2.0. A ITSM A2s A/µs W V V A ℃ ℃ V ELECTRICAL CHARACTERISTICS (Ta= 25℃, unless otherwise specified) PARAMETER Gate Trigger Voltage U12JZ47 Gate Trigger Current U12JZ47A SYMBOL I II III IV I II III IV I II III IV Peak On-State Voltage Gate Non-Trigger Voltage Repetitive Peak Off−State Current Holding Current U12JZ47 Critical Rate of Rise of Off-State Voltage U12JZ47A Critical Rate of Rise of U12JZ47 Off-State Voltage at U12JZ47A Commutation VGT IGT VTM VGD IDRM IH dv / dt (dv / dt) c TEST CONDITIONS MT2 (+), Gate (+) VD = 12V MT2 (+), Gate (-) RL = 20Ω MT2 (-), Gate (-) MT2 (-), Gate (+) MT2 (+), Gate (+) MT2 (+), Gate (-) MT2 (-), Gate (-) MT2 (-), Gate (+) VD = 12V RL = 20Ω MT2 (+), Gate (+) MT2 (+), Gate (-) MT2 (-), Gate (-) MT2 (-), Gate (+) ITM = 17A VD = Rated, Tc = 125℃ MIN TYP MAX UNIT 1.5 1.5 V 1.5 30 30 30 20 20 20 1.5 0.2 VDRM = Rated VD = 12V, ITM = 1A VDRM = Rated, Tj = 125℃ Exponential Rise 20 50 300 200 V V µA mA V/µs 10 VDRM = 400V, Tj = 125℃ (di / dt) c = -6.5A / ms mA V/µs 4 THERMAL DATA PARAMETER Thermal Resistance Junction to Case TO-220F UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw SYMBOL θJc RATINGS 3 UNIT ℃/W 2 QW-R401-025,A U12JZ47/A TRIAC TYPICAL CHARACTERICS 50 GATE VOLTAGE, V G (V) 30 VGM= 10V P GM= 5W 10 PG(AV) = 0.5W 5 3 -40℃ VGT IGM= 2A 1 25℃ VGT 0.5 IGT(U12JZ47A) IGT(U12JZ47) 0.3 0.1 1 VGD= 0.2V IGT(U12JZ47A) IGT(U12JZ47) 3 100 10 30 SURGE ON-STATE CURRENT, ITSM (A) GATE TRIGGER CHARACTERISTIC RATED SURGE ON - STATE CURRENT 160 140 120 100 60Hz 50 80 60 40 300 1000 3000 3 1 10 30 CONDUCTION TIME (CYCLES AT 50Hz AND 60Hz) GATE CURRENT, I G (mA) 50 100 MAXIMUM ON-STATE POWER DISSIPATION 28 MAXIMUM ON-STATE CHARACTERISTICS ON - STATE POWER DISSIPATION, PT (AV) (W) ON-STATE CURRENT, IT (A) 30 10 5 3 Tj = 125℃ 25 1 0.5 0.3 0.8 1.2 1.6 2.0 2.4 2.8 8 0 3.2 0 2 4 6 10 12 14 16 RMS ON - STATE CURRENT, I T (RMS) (A) ALLOWABLE CASE TEMPERATURE VS. RMS ON-STATE CURRENT ALLOWABLE AMBIENT TEMPERATURE VS. RMS ON-STATE CURRENT 160 120 100 80 60 360° 40 CONDUCTION RESISTIVE, 20 INDUCTIVE LOADS MAXIMUM ALLOWABLE AMBIENT TEMPERATURE, Ta MAX. (℃) 1 140 2 4 6 8 10 12 14 16 RMS ON - STATE CURRENT, I T (RMS) (A) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 2 3 120 4 5 100 NO HEAT SINK 30×30×2mm A HEAT SINK 50×50×2mm A HEAT SINK 70×70×2mm A HEAT SINK 100×100×2mm A HEAT SINK SILICON GREASE COAT. 80 60 40 20 0 0 8 GATE VOLTAGE , V T (V) 140 MAXIMUM ALLOWABLE CASE TEMPERATURE, Tc MAX. (℃) 20 360° CONDUCTION 16 RESISTIVE, INDUCTIVE 12 LOADS 4 0.1 0.4 0 24 1 0 2 2 3 4 4 6 5 8 10 12 RMS ON - STATE CURRENT, I T (RMS) (A) 3 QW-R401-025,A U12JZ47/A TRIAC ■ TYPICAL CHARACTERICS (Cont.) VGT (Tc) / VGT (Tc = 25℃) - Tc (TYPICAL) IGT (Tc) / IGT (Tc = 25℃) - Tc (TYPICAL) VD = 12V RL = 20Ω 2 IGT (Ⅲ) 1 IGT (Ⅰ, Ⅱ ) 0 -40 1.0 0.6 0.2 -40 0 40 120 80 CASE TEMPERATURE, Tc (℃) IH (Tc) / IH (Tc = 25℃) 2.4 1.6 0.8 0 -40 0 40 80 120 CASE TEMPERATURE, Tc (℃) TRANSIENT THERMAL IMPEDANCE, θJC (℃/W) IH (Tc) / IH (Tc = 25℃) - Tc (TYPICAL) ITM = 1A VD = 12V VD = 12V RL = 20Ω 1.4 VGT (Tc) / VGT (Tc = 25℃) IGT (Tc) / IGT (Tc = 25℃) 3 10 0 40 120 80 CASE TEMPERATURE, Tc (℃) TRANSIENT THERMAL IMPEDANCE (JUNCTION TO CASE) 5 3 1 0.5 0.3 0.1 0.001 0.01 0.1 1 10 100 TIME, t (s) PULSE TRIGGER CHARACTERISTIC (TYPICAL) 100 RESISTANCE LOAD VD = 12v RL= 20Ω Tc= 25℃ RECTANGULAR WAVEFORM 50 IGT(tw)/IGT 30 10 5 IGT (Ⅱ) 3 1 IGT (Ⅲ) IGT tw IGT (Ⅰ) 0.5 1 3 10 30 100 300 GATE TRIGGER PULSE WIDTH, t w (μs) UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 4 QW-R401-025,A U12JZ47/A TRIAC UTC assum es no responsibility for equipm ent failures that result from using products at v alues that ex ceed, ev en m om entarily, rated v alues (such as m ax im um ratings, operating condition ranges, or other param eters) listed in products specifications of any and all UT C products described or contained herein. UT C products are not designed for use in life support appliances, dev ices or system s where m alfunction of these products can be reasonably expected to result in personal injury. R eproduction in whole or in part is prohibited without the prior written consent of the copyright owner. T he inform ation presented in this docum ent does not form part of any quotation or contract, is believ ed to be accurate and reliable and m ay be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 5 QW-R401-025,A