Specifications(PDF)

EV-G200B1
Imager
1/1.8" interline UXGA monochrome progressive CCD (ICX274AL)
Active picture elements
Cell size
UXGA: 1624 (H) x 1236 (V)
4.4 (H) x 4.4 (V) μm
Vertical
frequency
(frame rate)
15.31668 Hz at full resolution 0.29261 to 61.26674 Hz
adjustable via the communication (Frame rate depends on the AOI setting)
Maximum frame rate (61.26674 Hz) is when vertical resolution AOI setting is 230.
Horizontal frequendy
Pixel frequency
19.176 kHz
36.818175 MHz
Minimum scene illumination
Sync. system
0.16 Lux at F1.2, 15.31668 Hz
Internal
Video outpout format
Digital 8, 10 or 12 bit Raw data
Preset continuous mode: 10 μseconds to 16,777,216 μseconds
Preset trigger mode: 10 μseconds to 16.777,216 μseconds
Pulse width mode: 10 μseconds to unlimited
Exposure time
Gain
0 to 20.4 dB
Gamma
Gamma 1.0 (Factory default) or uploadable gamma table
Input voltage
+10.8 to +26.4 Vdc (power/signal connector or Power Over Ethernet connector)
(power supply from power/signal connector automatically prioritized)
Consumption
Less than 6.8 W
Power supply
Dimensions
50 (W) x 50 (H) x 53.5 (D) mm (NOT including the connector)
Lens mount
C-mount
Weight
Operational
temperature
Approximately 170g
Minimum
-5 ℃
Maximum
Camera housing temperature (top plate) should not exceed 70℃
Storage temperature
Environmental temperature: -30 to 65 ℃