Brochure PDF(Extended Depth of Field Cameras)

No focus readjustment required. Industrial camera with a newly developed algorithm.
RICOH extended depth of field camera
《 Camera Link ™ 》 5 Mega-Pixel Camera & Lens
Detailed flaw
inspection
Substrate
inspection
《 GigE Vision ™ 》 2 Mega-Pixel / VGA Camera & Lens
Distribution
line
inspection
DPM*
identification
*Direct Part Marking
EV-L500C1
NEW
EV-G200C1
EV-G200B1
EV-G030B1
A fusion of RICOH optical design and image processing
technology has realized a depth of field 3 to 5 times* better
than conventional cameras (compared to RICOH products).
Consisting of a dedicated camera equipped with a newly developed special algorithm and a specific range of
lenses, RICOH’s extended depth of field camera system requires no focus readjustment or no repositioning of
the camera or subject. A new 5MP high resolution camera with 3 dedicated lenses have been added to the EDoF
lineup to support a wider range of applications.
*When compared to cameras at the same working distance. The extended depth of field effect varies depending on the subject matter.
5 Mega-Pixel
• PCB substrate inspection (AOI)
• Detailed flaw inspection
Camera & Lens
■5MP high resolution quality in a compact design
Substrate visual inspection
■Newly developed image processing (adaptive reconstruction filter)
With an extended depth of field camera, the entire depth of field
is in focus, from the front of the foot of the substrate (indicated
by the red arrow) to the back, even in substrate inspections
using a high condenser.
■High frame rate (up to 53 fps) capture is possible
suppresses noise and reproduces fine patterns
■High-speed transfer using CameraLink™ (PoCL™ model)
EV-L500C1
5 megapixel
Color CMOS model
5MP extended depth of
field camera
Conventional 5MP camera
NEW
Camera
Link
Spectral sensitivity properties
60,00
R
FFQE[%]
50,00
40,00
30,00
G1 G2
20,00
B
10,00
0,00
400 500 600 700 800 900 1000
Wave Length[nm]
EL-BC5090-5M
Scale 40:100
Unit: mm
17.526
EL-BC2550-5M Product specifications
Focal length
F number (fixed)
Minimum object distance
Horizontal angle With EV-L500C1
of view
connected
External dimensions
Weight
1
25 mm
5.0
69
Focal length
F number (fixed)
Minimum object distance
28.8°
Horizontal angle With EV-L500C1
of view
connected
149 g
4
17.526
φ42
4
Unit: mm
EL-BC5090-5M Product specifications
0.1 m
φ42 mm×57.5 mm
External dimensions
Weight
Scale 40:100
1-32UN-2A
4
5.9
57.5
NEW
External dimensions
φ42
M40.5, P=0.5
φ22.4
1-32UN-2A
φ42
Scale 40:100
External dimensions
M40.5, P=0.5
External dimensions
EL-BC751L-5M
NEW
1-32UN-2A
NEW
M40.5, P=0.5
EL-BC2550-5M
50 mm
9.0
81
Focal length
F number (fixed)
Minimum object distance
14.6°
Horizontal angle With EV-L500C1
of view
connected
166 g
Unit: mm
EL-BC751L-5M Product specifications
0.2 m
φ42 mm×69 mm
17.526
External dimensions
Weight
75 mm
10.9
0.25 m
9.8°
φ42 mm×81 mm
189 g
What is RICOH extended depth of field camera?
• The combination of a dedicated camera utilizing a newly developed special algorithm and a dedicated lens.
• Available camera resolutions include 5MP (up to 53 fps), 2MP (15 fps) and VGA (90 fps).
• Uses FPGA (Field Programmable Gate Array) to achieve near real time image data processing.
• Equipped with an effective [AOI* scan mode] to improve the quality and speed of inspection.
*Area of Interest: Only the part of the image required for scanning is scanned
and transferred, reducing the time required to read and transfer data.
Foreground and background subjects are in focus, so there is no need to readjust the focus or the subject and camera positions.
Conventional camera imaging result
RICOH extended depth of field camera (example)
Comparison of the depth of field at the same focal length and F number
MTF*
Lower limit of MTF
tolerance
MTF of RICOH extended
depth of field camera
MTF of normal optical system
Depth of field
The foreground QR code cannot be recognized.
2 Mega-Pixel
VGA
Camera & Lens
EV-G200C1
2 megapixel
Focus position
Both foreground and background QR codes can be
recognized.
• Bar code and character recognition in distribution,
pharmaceutical, food, and steel industries
• Direct Part Marking (DPM) identification
Camera & Lens
Color CCD model
EV-G200B1
2200万
megapixel
画素
EV-G030B1
300,000
pixels
Spectral sensitivity properties
Spectral sensitivity properties
Spectral sensitivity properties
Relative Response[a.u.]
GigE
Vision
Relative Response[a.u.]
GigE
Vision
Relative Response[a.u.]
GigE
Vision
* Modulation Transfer Function
Working distance
0.6
R
IR cut filter
0.4
0.2
0.0
400
500
600
Wave Length[nm]
700
EL-CC0817B-VG
EL-CC0833B-VG
EL-CC0866B-VG
1.0
0.8
0.6
0.4
0.2
0.0
400 500 600 700 800 900 1000
Wave Length[nm]
EL-HC1228-2M
EL-HC1255-2M
F number (fixed)
Minimum object distance
With EV-G030B1
connected
Horizontal angle With EV-G200B1
of view
connected
With EV-G200C1
connected
External dimensions
Weight
0.0
0 500 600 700 800 900 1000
400
φ16.5
φ28.5
φ29.5
8.5 mm
1.7(EL-CC0817B-VG)
3.3(EL-CC0833B-VG)
6.6(EL-CC0866B-VG)
0.2 m
30.1°
—
—
φ42×40 mm
120 g
Wave Length[nm]
Scale 65:100
4
Unit: mm
EL-CC0817B-VG/EL-CC0833B-VG
EL-CC0866B-VG Product specifications
Focal length
0.2
External dimensions
φ27, P=0.5
φ42
φ40.5, P=0.5
φ18
7
3.5
0.6
0.4
Scale 65:100
External dimensions
40
0.8
EL-CC3521-2M
EL-CC3543-2M
EL-CC3586-2M
Scale 65:100
External dimensions
1.0
28.5
7.2
Unit: mm
EL-HC1228-2M/
EL-HC1255-2M Product specifications
Focal length
F number (fixed)
Minimum object distance
With EV-G030B1
connected
Horizontal angle With EV-G200B1
of view
connected
With EV-G200C1
connected
External dimensions
Weight
12 mm
2.8(EL-HC1228-2M)
5.5(EL-HC1255-2M)
0.25 m
21.6°
32.6°
32.4°
φ29.5×28.5 mm
55 g
φ19.5
G
φ28.5
B
φ29.5
0.8
φ27, P=0.5
1.0
35.4
4
6
Unit: mm
EL-CC3521-2M/EL-CC3543-2M
EL-CC3586-2M Product specifications
Focal length
F number (fixed)
Minimum object distance
With EV-G030B1
connected
Horizontal angle With EV-G200B1
of view
connected
With EV-G200C1
connected
External dimensions
Weight
35 mm
2.1(EL-CC3521-2M)
4.3(EL-CC3543-2M)
8.6(EL-CC3586-2M)
0.4 m
7.5°
11.4°
11.4°
φ29.5×35.4 mm
63 g
2
Camera Specifications
EV-L500C1
1" interline 5.2M color
grobal shutter CMOS
Image sensor
Effective number of
image output pixels (H × V)
Cell size (H × V)
UXGA class: 1624 × 1236
VGA class: 648 × 494
5.0 × 5.0 μm
4.4 × 4.4 μm
Up to 53 fps (at 8 bit 8 TAP)
15.31668 Hz (at full resolution)
Adjustable by communication 0.29261 to 61.26674 Hz
(Max. frame rate varies according to AOI setting)
Max. camera frame rate (61.26674 Hz) is when the vertical resolution is set to 230.
7.4 × 7.4 μm
89.91172 Hz (at full resolution)
Adjustable by communication
0.72028 to 360.33325 Hz
(Max. frame rate varies according to AOI setting)
Max. camera frame rate (360.33325 Hz) is
when the vertical resolution is set to 104.
47.2028 kHz
19.176 kHz
109 kHz (at 8 bit 8 TAP)
40 MHz (at 8 bit 8 TAP)
RAW 8 bit / 10 bit / 12 bit
4 to 16,777,215 μseconds
0 to 24 dB
Programmable
(Factory default OFF Gamma 1.0)
12 Vdc ± 10%
Less than 3.8 W
50 mm × 50 mm × 39.6 mm*
Approximately 140 g
Gamma = 1.0, uploadable gamma table (selectable using communication)
DC 10.8 to 26.4 V (power/signal connector or Power Over Ethernet) (power supply from power/signal connector is automatically prioritized)
Less than 6.8 W
Less than 6.5 W
50mm × 50mm × 53.5 mm*
C mount
Approx. 170 g
0 to 45°C
-5 to 40°C
-20 to 65°C
-30 to 65°C
6
4
1
EV-L500C1
Rear connector
3
2
Pin
number
1
EV-L500C1
Signal name
1 9
2 10 8
3 11 12 7
6
4
5
EV-G200C1/EV-G200B1/EV-G030B1
Rear connector
IN/OUT
Voltage
Low Voltage
0 V
0 to +0.99 V
0 V
0 to +0.99 V
0 V
0 to +0.99 V
0 V
0 to +0.99 V
0 V
+12 Vdc
32
GND
IN
SP-4
IN/OUT
3
SP-3
IN/OUT
4
SP-2
IN/OUT
5
SP-1
IN/OUT
6
+12 Vdc
IN
Signal name
IN/OUT
Specification
Default setting
—
—
Trigger operating status
signal output
Exposure period signal
output
Open
Open
Open
TRG input
Open
Open
+2.3 to +5.0 V
+3.3 V
+2.3 to +5.0 V
+3.3 V
+2.3 to +5.0 V
+3.3 V
+2.3 to +5.0 V
+3.3 V
18
Power supply GND
Power supply input
—
—
GND
+10.8 to +26.4 Vdc
3
Output 1
OUT
Opt. Isolated
4
Output 2
OUT
Opt. Isolated
5
6
7
8
9
10
Output 3
Output 4
Output 5
Input 1
Input 2
Input 3
Power supply input for
I/O signal
GND for I/O signal
OUT
OUT
OUT
IN
IN
IN
Opt. Isolated
Opt. Isolated
Opt. Isolated
Opt. Isolated
Opt. Isolated
Opt. Isolated
—
IO VCC +3 to +26.4 Vdc
—
—
IO GND
—
11
CH1
LED
CH2
2-M4 Depth 4(Both sides in common)
12 22.5
Unit: mm
4-M4 Depth 4(4 directions in common)
Screw for Tripod Depth 5(Both sides in common)
50
7.5
① DC iris lens connector
*Does not function with
this product.
53.4
② RJ45 connector
*This product is a PoE type.
φ49
50
Pin
number
1
2
12
12.5
8
EV-G200C1/EV-G200B1/EV-G030B1 Dimensions
Trigger input signal can be assigned either on Camera Link connector (CC1) or on the No. 2 pin of the power/IO connector
through the camera setting communication.
EV-G200C1
EV-G200B1
EV-G030B1
4-M4 Depth 4
5M CMOS
High Voltage
2
Input
Output
Input
Output
Input
Output
Input
Output
Input/output signal connector
Hirose HR10A-7R-6PB or
equivalent
This connector is for 12 Vdc
power input and the input and
output signals. The trigger input
and sync input/output signals
can be assigned through the
camera setting communication.
Use Hirose HR10A-7P-6S or
equivalent on cable side.
40
5
1’’-32UNF
(C mount screw)
φ34
30
50
50
EV-L500C1/EV-G200C1/EV-G200B1/EV-G030B1 Rear connector specifications
4-M4 Depth 4(Both sides in common)
Screw for Tripod Depth 5(Both sides in common)
The special algorithm of the camera varies depending on each of the 11 lenses. You will be provided a set configured
to the algorithm according to the ordered lens, so make sure to use with the fixed set.
Note
30
Unit: mm
φ32
Lens model
EV-L500C1 Dimensions
EV-G030B1
╳
╳
╳
○
○
○
○
○
○
○
○
24
EL-BC2550-5M
EL-BC5090-5M
EL-BC751L-5M
EL-HC1228-2M
EL-HC1255-2M
EL-CC3521-2M
EL-CC3543-2M
EL-CC3586-2M
EL-CC0817B-VG
EL-CC0833B-VG
EL-CC0866B-VG
Camera model
EV-G200C1
EV-G200B1
╳
╳
╳
╳
╳
╳
○
○
○
○
○
○
○
○
○
○
╳
╳
╳
╳
╳
╳
EV-L500C1
○
○
○
╳
╳
╳
╳
╳
╳
╳
╳
12.5
RICOH extended depth of field camera and supported lenses
32
Input voltage
Power
supply
Power consumption
External dimensions (W × H × D)
Lens mount
Weight
Operating
Minimum/
temperature Maximum
Storage temperature
(Environmental temperature)
*Excluding connector
36.818175 MHz
Internal
Digital 8, 10 or 12 bit RAW data or RGB
Digital 8, 10 or 12 bit RAW data
8 bit
Preset continuous mode: 10 to 16,777,216 μs, / Preset trigger mode: 10 to 16,777,216 μs, / Pulse width trigger mode: 10 μs to infinite
0 to 20.4 dB
(6.3)
Movie output format
Gamma
EV-G030B1
1/3" Square pixel format VGA
progressive monochrome CCD
2560 × 2048
Horizontal frequency
Pixel frequency
Sync system
Exposure time
Gain
EV-G200B1
1/1.8" Square pixel format UXGA
progressive monochrome CCD
39.6
Vertical frequency
(frame rate)
EV-G200C1
1/1.8" Square pixel format UXGA
progressive color CCD
1’’-32UNF
(C mount screw)
③ I/O signal connector
Equivalent to Hirose HR10A-10R-12PB
This is a connector for power supply input
and I/O signal.
Use a product equivalent to HR10A-10P-12S
(Hirose)on the cable side.
*The information contained herein is subject to change without notice. *The actual color of the product may slightly vary from the pictures. *Camera Link, GigE Vision, and PoCL are trademarks of Automated Imaging Association (AIA). *QR Code
is a registered trademark of Denso Wave Incorporated. *Other company names and product names in this manual are trademarks or registered trademarks of their respective owners. *For details and constraint conditions, contact your dealer.
For your safety
•Read all safety precautions thoroughly before using the product. •Use the correct power supply and voltage listed. •Avoid using or installing in locations subject to large amounts of water, moisture, steam, dust, or oil smoke.
•Be sure to ground the product. Malfunction or electric leakage can cause an electric shock.
Industrial Partner Business Division, Industrial Module Business Center
http://industry.ricoh.com/en/fa_camera_lens/
For orders and inquiries:
For inquiries concerning the products in this catalog, please contact us as shown below.
This catalog was printed with the RICOH Pro C Series.
The information in this catalog is current as of May 2015.
1505PH-1505<34181213>1/P