V I S H AY I N T E R T E C H N O L O G Y, I N C . AEC-QUALIFIED Overview of AEC-Qualified Products AEC-QUALIFIED PRODUCTS DISCRETE SEMICONDUCTORS • • • • • • • • • • ESD Protection Devices FRED PT™, HEXFRED® MOSFETs Optoelectronics Rectifiers Schottky HPS Gen II Schottky HPS Gen V Sinterglass Diodes Small-Signal Diodes: Switching, Schottky, Zener, RF Zener and Suppressor Diodes PASSIVE COMPONENTS • Capacitors –– Aluminum –– Tantalum –– Ceramic –– Film • Resistors –– Film –– Wirewound –– Power Metal Strip® –– Thick Film Power • Non-Linear Resistors –– NTC Thermistors –– Pt Thin Film Sensor • Inductors –– IHLP® –– IHTH A WORLD OF SOLUTIONS SELECTOR GUIDE 1/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6323-1510 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AEC-QUALIFIED Overview of AEC-Qualified Products AEC-Q101 Product Table Discrete Semiconductors AEC-Q101-Qualified FRED Pt®, HEXFRED® Schottky HPS Gen II Description / Families • Tj max. = 175 °C • Ultrafast diodes TO-263 (D2PAK), TO-220, TO-262, TO-247, Die Products • Planar technology (Tj max. = 150 °C) - Extremely low VF (15 V to 60 V) • Planar technology (Tj max. = 175 °C) - 45 V to 150 V TO-263 (D2PAK), TO-220, TO-262, TO-247, Die Products • Schottky, Ultrafast, Fast Recovery, Standard Rectifiers µSMP, SMP, SMPC, TO-220, TO-262, TO-263, SMA, SMB, SMC, SUPERECTIFIER®, Axial, Bare Die • Auto/PAR® TVS • TRANSZORB® TVS µSMP, SMP, SMPC, TO-218AB, SMA, SMB, SMC, Axial, Bare Die • Industry-standard part numbers • Leaded/SMD packages • Glass/plastic packages • Planar technology •Tj max. = 150 °C • Low leakage current MiniMELF, QuadroMELF, MicroMELF, SMF (DO219-AB), SOT-23, SOD-123, SOD-323, DO-214 (BZG03/04/05), DO-35, Die Products • Fast rectification, high switching, avalanche-rated energy, glass passivated junction, hermetically sealed SOD-57, SOD-64 • ± 30 kV contact or air discharge ESD protection • Single line and dual line (bi-directional) SOT-23, SMF (DO-219 AB), LLP1006, SOD-923, Die Products • N-channel and p-channel TrenchFET® power MOSFETs (avalanche-rated cell density process, very low on-resistance, optimized logic-level and standard-level types) PowerPAK® 1212-8, PowerPAK SO-8L, DPAK (TO-252), TO-262, TO-263, TO-220, reverse DPAK, Bare Die, SO-8, TSOP-6, SOT-23, SC-70, SQ • LED - full color palette including white • Infrared emitters – 830 nm, 850 nm, 870 nm, 890 nm, and 940 nm • Photodiodes, phototransistors – peak sensitivity matches emitters: 400 nm to 1100 nm, 790 to 970 nm • Ambient light sensors – peak sensitivity of 540 nm • Optical sensors – reflective sensors, slotted interrupters PLCC-2, PLCC-4, Little Star®, TELUX, 1206, 0805, 0603, 1.8 mm gullwing, reverse gullwing, PLCC-4 multicolor, MiniLED, custom packages Rectifiers Transient Voltage Suppressors Small-Signal Diodes (Switching, Schottky, Zener, RF, Varicap) Sinterglass Diodes ESD Protection MOSFETs Optoelectronics Packages Blue font indicates families in Vishay’s Automotive Grade Product Program. SELECTOR GUIDE 2/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6323-1510 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AEC-QUALIFIED Overview of AEC-Qualified Products Blue font indicates families in Vishay’s Automotive Grade Product Program. AEC-Q200 Product Table Passive Components AEC-Q200-Qualified See program description at http://www.vishay.com/applications/ Description / Families Packages CAPACITORS Aluminum Electrolytic Tantalum • Very high lifetime, high ripple current, low ESR, high temperature up to 150 °C, low impedance - Radial 146 RTI, 140 RTM, 150 RMI, 152 RMH - SMD 160 CLA, 146 CTI, 140 CRH, 150 CRZ TP3 High performance, low ESR Cases A, B, C, D, and E TH3 High temperature: 150 ˚C Cases A, B, C, D, and E TH4 High temperature: 175 ˚C Cases B, C, and D TP8 Small case sizes, maximum capacitance Cases: 0603, 0805, low-profile A & B SurfaceMount MLCC • Matte tin terminations incl. Polymer layer (Soft-/Flex-) option • AgPd terminations for conductive epoxy assembly • C0G (NP0), X7R and X8R • Size 0402 up to 1812 with ranges from 16 V to 3000 V • Excellent ESD performance: 100 V (0805, 10 nF) up to 22 kV ESD, 200 V (0805, 10 nF) up to 25 kV ESD SMD (VJ…31X ROHS Automotive series) SMD (VJ…31 and VJ…34 Automotive series) Leaded MLC A...V Series, K...V Series • Axial, radial crimped or straight leads • Tin plated copper-clad steel wire, 0.5 mm • 50 VDC, 100 VDC, 200 VDC • Class 1 and Class 2 ceramic • Lead spacing of 2.5 mm and 5.0 mm AY2 Series X1/Y2 safety capacitor • Radial leaded, straight leads • Tin plated copper-clad steel wire, 0.6 mm • Temperature cycle: 1000 cycles (-55 °C to +125 °C) • Safety Class X1, 440 VAC, Y2, 300 VAC (IEC 60384-14.3) • Lead spacing of 5 mm, 7.5 mm and 10.0 mm • MKT DC lacquered radial 5 mm - 27.5 mm : BFC2 365-366367-368-369-467-468-469 10 mm - 27.5 mm: MKT 1820 7.5 mm - 27.5 mm: BFC2 338 6 15 mm - 27.5 mm: F1772-2 310V X2 (<= 470 nF) 27.5 mm - 52.5 mm: MKP 1848 DC-Link Ceramic Ceramic Singlelayer Film Capacitor • MKT DC potted radial • MKP RFI Y2 potted radial • MKT RFI X2 potted radial • MKP DC-Link potted radial INDUCTORS IHLP IHTH SELECTOR GUIDE • Low profile, high current, surface-mount • Shielded construction • Handles high transient current spikes without hard saturation • Ultra-low buzz noise due to composite construction 1616 to 6767 (-A1 and -1A suffix) Frequency range up to 5 MHz 1616 to 8787 (-5A suffix) • • • • 0750 and 1125 High current, through-hole High operating temperature range from -55 to +155 ˚C Shielded construction Handles high transient current spikes without hard saturation • Ultra-low buzz noise due to composite construction High operating temperature, up to +155 ˚C 3/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6323-1510 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AEC-QUALIFIED Overview of AEC-Qualified Products Blue font indicates families in Vishay’s Automotive Grade Product Program. AEC-Q200 Product Table Passive Components AEC-Q200-Qualified See program description at http://www.vishay.com/applications/ Description / Families Packages RESISTORS* Film Wirewound Power Metal Strip® • MELF (SMM, MMA, MMB, MMU), high pulse capabilities, low TK • Carbon film MELF (2.2 Ω to 200 kΩ) • Thin film (TNPW e3, MC AT, ACAS AT all sizes) • WSF (10 Ω to 100 kΩ) • MBA/SMA0204 (10 Ω to 301 kΩ) • MBB/SMA0207 (10 Ω to 7.5 MΩ) • MBE/SMA0414 (10 Ω to 22 MΩ) • VR25 • CRCW • CRCW-HP • CRCW-IF • CRCW-HR •CRCW-TR •CRCW-AP •CRCW-P •RCL •CRA •RCA • PAT, PATT, MPMA, NOMCA • PR01, PR02 • RCWE, RCWL Most SMD packages available • WSC, WSN, WSZ • SR (1 W to 5 W radial leads) 2515 to 7532 packaging (inch) • • • • 8518 2818 0612, 2512 0603, 0805, 1020, 1206, 2010, 2512, 2816, 3921, 5931, 2726, 4026, 3637 WSBS WSH WSK WSL • WSL high power • WSLP WSLxxxx…18’s 0603, 0805, 1206, 2010, 2512, 3921, 5931, 2726, 4026 • WSLS • WSLT 2512 2010…18, 2512, 3921, 5931, 2726,4026 • WSMS • WSR 2908 4527 (2, 3 and 5 [high power]) *Flame retardance test may not be applicable to some resistor technologies. Contact Vishay Sales or Product Marketing for additional information SELECTOR GUIDE 4/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6323-1510 www.vishay.com V I S H AY I N T E R T E C H N O L O G Y, I N C . AEC-QUALIFIED Overview of AEC-Qualified Products Blue font indicates families in Vishay’s Automotive Grade Product Program. AEC-Q200 Product Table Passive Components AEC-Q200-Qualified See program description at http://www.vishay.com/applications/ Description / Families Packages RESISTORS* Thick Film Power D2TO020 and D2TO035 • SMD power resistor 20 W and 35 W at 25 °C • Wide resistive range from .01 Ω to 550 kΩ • Non-inductive LTO100 • Power resistor 100 W at 25 °C • Wide resistive range from 0.015 Ω to 1 MΩ • Non-inductive DTO25 • SMD power resistor 25 W at 25 °C, min 3 W on PCB • Wide resistive range from .016 Ω to 700 kΩ • Non-inductive D2PAK / TO-263 NTCS • Tolerance on R25 down to 1 % • Suitable for wave or reflow soldering • NiSn terminations • Fully glass coated and protected SMD sizes 0402, 0603, 0805 NTCLE201E3…SB • 2-point mini chip sensor, non-insulated flexible Leads Radial leaded 2.4 mm NTCLE203E3...SB0 • 2-point radial leaded sensor • 0.5 °C basic accuracy Radial leaded 4.2 mm NTCLE305E4…SB • 2-point micro chip sensor, insulated leads • Fast response time 0.7 s Radial leaded 1.6 mm TO-247 DPAK / TO-252 NON-LINEAR RESISTORS NTC Thermistors NTCALUG NTCALUG01A Series • NTC thermistors, standard lug sensors, insulated PTFE cable NTCALUG02A Series • NTC thermistors, low thermal gradient lug sensors NTCALUG03 Mini Lug Series • Small size connector and small lug ring tongue terminal Stud Screw M3 Ø7.1 mm Stud Screw M3 Ø8.5 mm Stud Screw M2, M3 Ø5.5 mm Pt Thin Film Sensor NTCAFLEX05 Series • Flex foil sensors • Suitable for narrow space applications • Insulated and humidity resistant 25 mm x 6 mm PTS-AT • Class F0.3, F0.6 in 500 Ω or 1 kΩ • High temperature: 175 °C SMD 0805, 1206 *Flame retardance test may not be applicable to some resistor technologies. Contact Vishay Sales or Product Marketing for additional information SELECTOR GUIDE 5/5 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VMN-MS6323-1510 www.vishay.com