PR02L, PR2.5L, PR2.5LS Datasheet

PR02L, PR2.5L, PR2.5LS
Vishay BCcomponents
HID Lamp Metal Film Leaded Resistors
FEATURES
• Metal film technology
• High power in small package (2 W/0309,
2.5 W/0414)
• High stability, reliability during lamp ignitions
• Suitable for high temperature operations
• Compatible with lead (Pb)-free and lead containing
soldering processes
• Compliant to RoHS directive 2002/95/EC
A homogenous film of CrSi alloy is deposited on a highgrade ceramic body. The ohmic value is adjusted by means
of a helical groove on the resistive layer. Steel copper plated
wires are then welded on the stainless steel end caps. The
resistor is not coated.
APPLICATIONS
• HID lamps
TECHNICAL SPECIFICATIONS
DESCRIPTION
Resistance Range
PR02L
PR2.5L
(1)
PR2.5LS
2 kΩ to 70 kΩ
Resistance Tolerance (2)
± 5 %, E24 series
Temperature Coefficient
± 250 ppm/K
Rated Dissipation P70
2W
2.5 W
Maximum Permissible Voltage
(Umax. AC/DC)
500 V
750 V
Pull Test
≥ 4 kgf
≥ 2.3 kgf
Notes
(1) Other values available on request
(2) Other tolerances available on request
PART NUMBER AND PRODUCT DESCRIPTION
(3)
PART NUMBER (4): PR02L00001802JR500
P
R
0
2
MODEL/SIZE
VARIANT
PR02L0
PR25L0
PR25LS
0 = Neutral
L
0
0
0
0
1
WIRE TYPE TCR/MATERIAL
0 = Standard
0 = Standard
8
0
VALUE
3 digit value
1 digit multiplier
MULTIPLIER
1 = *101
2 = *102
3 = *103
4 = *104
2
J
R
5
0
TOLERANCE PACKAGING (5)
J=±5%
R2
R5
F5
F2
0
SPECIAL
Up to 2 digits
00 = Standard
PRODUCT DESCRIPTION: PR02L 5 % R5 18K
PR02L
5%
R5
18 kΩ
MODEL
TOLERANCE
PACKAGING (5)
RESISTANCE VALUE
PR02L
PR25L
PR25LS
±5%
R2
R5
F5
F2
18K = 18 kΩ
Notes
(3) The PART NUMBER is shown to facilitate the introduction of the unified part numbering system
(4) For historical 12NC information please contact factory
(5) Please refer to table PACKAGING, see next page
Document Number: 30258
Revision: 16-Oct-09
For technical questions, contact: [email protected]
www.vishay.com
45
PR02L, PR2.5L, PR2.5LS
Vishay BCcomponents HID Lamp Metal Film Leaded Resistors
PACKAGING
REEL
LOOSE IN BOX
MODEL
PIECES
CODE
PIECES
CODE
PR02L
5000
R5
5000
F5
PR2.5L
2500
R2
1500
F2
PR2.5LS
2500
R2
-
-
Note
• F2 and F5 are formed leads
DIMENSIONS
A
L1
Ød
ØD
DIMENSIONS - resistor types, mass and relevant physical dimensions
TYPE
L1
(mm)
Dmax.
(mm)
Ød
(mm)
A
(mm)
MASS
(mg)
PR02L
8.3 ± 0.1
3.55
0.80 ± 0.03
59.0 ± 1.5
600
PR2.5L
15.5 ± 0.3
3.55
0.80 ± 0.03
63.0 ± 1.5
650
PR2.5LS
21.5 ± 0.3
3.55
0.80 ± 0.03
63.0 ± 1.5
750
PREFORMED STYLE
A1
A3
L
A2
ØD
H
Ød
DIMENSIONS - preformed style
TYPE
Lmax.
(mm)
Dmax.
(mm)
Ød
(mm)
H
(mm)
A1
(mm)
A2
(mm)
A3
(mm)
MASS
(mg)
PR02L
8.3 ± 0.1
3.55
0.80 ± 0.03
9.0 ± 1.0
30.7 ± 2.0
10.0 ± 1.0
3.5 ± 1.0
400
www.vishay.com
46
For technical questions, contact: [email protected]
Document Number: 30258
Revision: 16-Oct-09
PR02L, PR2.5L, PR2.5LS
HID Lamp Metal Film Leaded Resistors Vishay BCcomponents
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with IEC 60115-1 specification, category LCT/UCT/56 (rated temperature
range: Lower category temperature, upper category temperature; damp heat, long term, 56 days). The tests are carried out in
accordance with IEC 60068-2-xx test method under standard atmospheric conditions according to IEC 60068-1, 5.3.
In the Test Procedures and Requirements table, tests and requirements are listed with reference to the relevant clauses of
IEC 60115-1 and IEC 60068-2-xx test methods.
A short description of the test procedure is also given. In some instances deviations from the IEC recommendations were
necessary for our method of specifying.
PERFORMANCE
IEC
60115-1
CLAUSE
4.8
IEC
60068-2-xx
TEST
METHOD
TEST
PROCEDURE
REQUIREMENTS
PERMISSIBLE CHANGE (ΔR)
-
Temperature
coefficient
Between
- 55 °C and + 155 °C
± 250 ppm/K
Pull force in horizontal directions until
the product breakdown
-
Pull test
PR02L
≥ 4 kgf
PR2.5L, PR2.5LS
≥ 2.3 kgf
Robustness of
terminations:
4.16
4.16.2
21 (Ua1)
Tensile all samples
Load 10 N; 10 s
4.16.3
21 (Ub)
Bending half number
of samples
Load 5 N; 4 x 90°
4.16.4
21 (Uc)
Torsion other half
of samples
3 x 360° in opposite direction
Document Number: 30258
Revision: 16-Oct-09
For technical questions, contact: [email protected]
No damage
± (0.5 % R + 0.05 Ω)
www.vishay.com
47
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000