V-Series V-Series CONTURA II, III SWITCHES The V-Series Contura II & III snap-in rocker switches offer countless unique options including choices for ratings, circuits, colors, illuminations and symbols. These single or double pole switches feature removable actuators in a choice of actuator styles and colors, and can be illuminated with either square or bar shaped lenses. Actuators may be purchased and stocked separately. An optional plug-in terminal connector enables pre-wiring of wire harnesses. The Contura switches with sealed option, are certified to IP66, signifying complete protection against dust and prolonged spray and submersion under pressure, and are recognized to UL1500 - Ignition Protection for Marine Products. These switches are vibration, shock, thermoshock, moisture and salt spray resistant. Temperature ratings range from -40°C to +85°C. Resources: Download 3D CAD Files IGS STP Watch Product Video Product Highlights: Countless options for ratings, circuits, colors, illuminations and legends Certified to IP66 for front panel components Vibration, shock, thermoshock, moisture and salt spray resistant Temperature range from -40°C to +85°C. Typical Applications: On/Off Highway Equipment Marine Military Armored Vehicles Mining Machinery and Equipment Any application requiring environmental protection Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | V-Series Contura Sealed Rocker Switches - Design Features V-Series Switch DESIGN FEATURES INTERCHANGEABLE ACTUATORS Panel redesign is a snap with our wide range of rocker styles. Achieve maximum design variety with minimum inventory. Simply swap rockers to create an entirely new look for your panel. OPTIONAL PANEL SEAL Prevents water/dust ingress behind panel. DUAL SEAL PROTECTION Seals out water, dust, debris, and enables switch certification to IP66 for front panel components. MULTIPLE LIGHTING OPTIONS In addition to Incandescent lamps, our LED illumination is offered in a wide array of light intensities, colors, as well as dual level, tri-color, and flashing options. CLEAN CONNECTIONS Options for both eight and ten terminal base styles with AMP & Packard compatible connectors affords myriad circuit options while providing ease of assembly. BRASS ROLLER PIN Robust mechanism eliminates the need for lubricants. Enables switch to withstand -40°C to +85°C temperatures. SILVER PLATED BUTT CONTACT MECHANISM Providing 50k to 100k electrical cycles and a variety of different electrical ratings. *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches - Actuator Options & Accessories | 3 Contura II & III Contura X Contura IV Contura XI Contura V Contura XII Contura VI (WAVE) Contura XIV Contura VII Illuminated Indicators & Accessories The Contura II & III actuators are constructed of thermoplastic polycarbonate and are offered with a hard nylon overlay or a “soft-touch” elastomer overlay. These models incorporate aesthetic designs on the top and bottom of the rocker featuring two rows of raised “bumps” on the Contura II and three “indented” lines on the Contura III. The Contura IV’s “Shape to create a Shape” actuator works with the curves, contours & advanced styling of the latest panel designs, flowing with these advanced curves & radii. This actuator style fits on the Contura flush bracket/bezel. The symmetrically curved Contura V actuator provides the perfect complement to the Contura IV’s “Shape to create a Shape” design concept. With its flush style mounting bracket, Contura V can be mounted in between two Contura IV’s, by itself, or in groups. The Contura VI WAVE sealed rocker switches, when used in a row, create an uniquely appealing “wave” design on your panel. A variety of colors and finishes are available for both rocker and wave insert. Contura VI features bar and oval lenses. Contura VII featuring gently curved corners and edges assuring compatibility with most any panel design. Intuitive feel is maximized by the use of 2 embossed circular pads located at opposite ends of the rocker. Any combination of Bar or Oval style lenses can be located in the pads providing a truly unique look, exclusive to Contura VII. The raised bracket/bezel on the Contura X helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. This curved rocker style is available with a variety of lenses and legends. The raised bracket/bezel on the Contura XI helps prevent inadvertent actuation of the rocker, as well as preventing debris from being trapped under the actuator. This convex style rocker is available with a wide variety of lenses and legends. The Contura XII version features a paddle style actuator with the raised bracket/bezel of Contura X and XI. The contoured handle design provides intuitive recognition and ease of operation and is available with all Contura X and XI lens and legend offerings. The Contura XIV represents a sleek new crossover rocker design which should appeal to Trucks, Buses and Heavy Vehicles as well as the Marine Industry. Intuitive feel is provided by recessed ridges along with a Center Groove which effectively defines the boundary between top and bottom switch functions. Alert operator of systems functions or malfunctions, are offered with removable/replaceable lamps in Contura II, II, V or X styles. Accessories include connectors, mounting panels, hole plugs, panel seals, and actuator removal tools. Refer to accessories page for full details Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | V–Series Contura Sealed Rocker Switches - General Specifications Electrical Contact Rating .4VA @ 24VDC (MAX) resistive 15 amps, 125VAC 10 amps, 250VAC 1/2 HP 125-250VAC 20 amps, 4-14VDC 15 amps, 15-28VDC 10A, 14VT 6A, 125VAC L Dielectric Strength 1500 Volts RMS Insulation Resistance 50 Megohms Initial Contact Resistance 10 milliohms max. @ 4VDC Life 50,000 - 100,000 cycles circuit dependent Contacts Silver alloy, silver tin-oxide, fine silver Terminals Brass or copper/silver plate 1/4” (6.3mm) Quick Connect terminations standard. Solder lug, Wire Lead Mechanical Endurance 150,000 cycles minimum circuit dependent Physical Lighted Incandescent - rated 10,000 hours Neon - rated 25,000 hours LED - rated 100,000 hours 1/2 life (LED is internally ballasted for voltages to 24VDC) Seals Internal Optional external gasket panel seal Base Polyester blend rated to 125°C with a UL flammability rating of 94V0. Contura II,III,IV,V, Hard Surface: Basic actuator VI, VII Actuator structure molded of thermoplastic polycarbonate with a hard Nylon 66 thermoplastic surface overlay. Soft Surface: Basic actuator structure molded of thermoplastic polycarbonate with an elastomer overlay. Contura X,XI,XII Actuator,VP Nylon 66 Reinforced rated to 105°C Lens Polycarbonate rated at 100°C Contura XIV Polycarbonate lens/sub-rocker with ABS shell Actuator Travel (Angular Displacement) 2 position 3 positions 18° 9° from center Mounting Specifications Agency Certifications Environmental Sealing Sealed version: IP66, this rating applies to front panel components of the actual switch only, and signifies complete protection against dust as well as powerful jets of water. Corrosion Mixed Flowing Gas (MFG) Class III 3 year accelerated exposure per ASTM B-827, B-845 Silver and gold contacts Operating Temp. -40°C to +85°C Vibration 1 Per Mil-Std 202F, Method 204D Test Condition A 0.06 DA or 10G’s 10-500 Hz. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Vibration 2 Resonance search 24-50 Hz 0.40 DA 50-2000 Hz ±10 G’s peak Horizontal Axis 3-5 G’s max. Random 24 Hz 0.06 PSD-Gsq/Hz 60 Hz 0.50 100 Hz 0.50 200 Hz 0.025 2000 Hz 0.025 No loss of circuit during test; <10μ seconds chatter. Shock Per Mil-Std 202F, Method 213B, Test Condition K @ 30G’s. Tested with VCH connector. Test criteria - No loss of circuit during test, pre and post test contact resistance. Salt Spray Per Mil-Std 202F, Method 101D, Test Condition A, 96 Hrs. Sealed version only. Dust Per Mil-Std 810C, Method 510.2 Air Velocity 300 ±200 Feet/Min, Test Duration 16 Hrs. Thermal Shock Per Mil-Std 202F, Method 107F, Test Cond. A, -55°C to +85°C. Test criteria pre and post test contact resistance Moisture Resistance Per Mil-Std 202F, Method 106F, Test Criteria - pre and post test contact resistance Ignition Protection All Contura switches with sealed construction meet the requirements of UL1500/ISO8846 for ignition protection, in addition to conformance with EC directive 94/25/EC for marine products. .830[21.08] Panel Thickness Range Gaskets Acceptable Panel Thickness 0 .030 to .250 (.76 to 6.35mm) TEST CUT 1.450[36.83] HOLE IN 1 .030 to .109 & .147 to .157 ACTUAL MATERIAL (.76 to 2.77mm & 3.73 to 3.98mm) Recommended: No gasket with panel SWITCH thickness of .032, .062, .093, .125,.187 or .250 MOUNTING HOLE Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches- Contura II & III - Ordering Scheme | 5 V 1 D A B T 0 B 1 Series 2 Circuit 3 Rating 4 5 6 Termination Illumination Lamp 7 Lamp 8 Bracket 1 SERIES V 2 CIRCUIT ( ) - momentary Terminal Connections as viewed from bottom of switch: SP - single pole - uses terminals 1, 2 & 3. 8 terminal 10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6. 8 - - 7 8 - - 7 Terminals 7, 8, 9 & 10 for lamp circuit only. 1 - - 4 1 - - 4 2 - - 5 2 - - 5 3 - - 6 3 - - 6 10 - - 9 Position: 1 2 3 SP DP 2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5 1A ONNONE OFF 2B (ON)NONE OFF 3C ONNONE (OFF) 4D ONNONE ON 5F ONNONE (ON) 6J ONOFF ON 7K ONOFF (ON) 8L (ON)OFF (ON) SPECIAL CIRCUITS H* 2 & 3 2 & 3, 5 & 4 5&4 G* 2 & 3, 5 & 6 2 & 3 OFF S* 2 & 3, 5 & 6 2 & 3 1&2 M* (2 & 3, 5 & 6) 2 & 3 OFF R* (2 & 3, 5 & 6) 2 & 3 2&1 E* 5 & 6 5 & 3 5&1 *Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit. 3 RATING 3 1 .4VA @ 28VDC Resistive B 15A 24V C 20A 18V D 20A 12V E 20A 14V, 10A 14VT (circuit 1, 4 , A & D only) F 10A 14V, 6A 14VT (circuit G only) M .4VA/20A 12V N .4VA/15A 24V 4 TERMINATION / BASE STYLE 8 term 10 Term Termination 12 .250 TAB (QC) no barriers AB .250 TAB (QC) with barriers JK .250 TAB (QC) no barriers 35 Solder Lug no barriers CD Solder Lug 56 Wire Leads no barriers EF Wire Leads Note: Codes J & K for circuits H, G & M. A R B 00 9 Actuator 10 Lens 11 Color 12 Legend 0 00 13 14 Legend Actuator Orientation Lens Legend 6,7 LAMP (SAME CODING FOR BOTH SELECTIONS) Selection 6: above terminals 1 & 4; Selection 7: above terminals 3 & 6 No lamp 0 Neon 1 125VAC 2 250VAC Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V LED* superbrightsuperbright Red AmberGreen Red 2VDC A LF R 6VDC B MG S 12VDC C NH T 24VDC D PJ V * Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma. 8 FLUSH BRACKET COLOR 1, PANEL SEAL Black White Gray No SealB W G One SealC Y H 9 ACTUATOR 0 No Actuator A, B Contura II C, D Contura III Actuator orientation above terminals: 10 LENS 0 - No Actuator Z - No Lens ClearWhite Amber Green Red 1 6 8 G M 2 7 C H N 3 8 D J P 4 9 E K R 5 A F L S 3,6 1,4 Blue T U V W Y Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. Jumper No No Yes T2 to 5 No No No No 5 ILLUMINATION Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed Lamps Illumination Type Lamp wired to Terminals S 0 NONE – – A 1 1 INDEPENDENT 8 (+) 7 (–) B 2 1 DOWN 3 (+) 7 (–) C 3 2 UP 3 (+) 7 (–) D 4 1 DOWN 3 (+) 7 (–) 2 DOWN 1 (+) 7 (–) E 5 1 UP 1 (+) 7 (–) 2 UP 3 (+) 7 (–) F 6 1 INDEPENDENT 8 (+) 7 (–) 2 UP 3 (+) 6 (–) G 7 1 INDEPENDENT 8 (+) 7 (–) 2 UP 3 (+) 7 (–) H Z 2 INDEPENDENT 8 (+) 7 (–) U Y 1 INDEPENDENT 8 (+) 7 (–) 2 INDEPENDENT 10 (+) 9 (–) SINGLE POLE SWITCHES ONLY J8 1 DOWN 3 (+) 8 (–) 2 INDEPENDENT 6 (+) 7 (–) KW 1 INDEPENDENT 8 (+) 7 (–) 2 INDEPENDENT 6 (+) 7 (–) DOUBLE POLE SWITCHES ONLY L9 1 DOWN 3 (+) 6 (–) MR 1 UP 3 (+) 6 (–) NT 1 DOWN 3 (+) 6 (–) 2 DOWN 1 (+) 4 (–) PV 1 UP 1 (+) 4 (–) 2 UP 3 (+) 6 (–) 11 ACTUATOR COLOR 1 AND TEXTURE 0 - No Actuator BlackGray Red White Soft Surface BGRW Hard Surface CHSY 12 ACTUATOR LENS OR BODY LEGENDS 2 11ON 12OFF 13 I 14O OFF ONO I 15 O O 16O O 17 O I 18 I O F N N F F F For additional legend options & codes, visit us at www.carlingtech.com. 13 LEGEND ORIENTATION 0 No legend (used with codes 11-18 in selection 12) 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 14 ACTUATOR LENS LEGEND 00 No legend this location / no actuator (used with codes 11-18 in selection 12) Selection 14 required when switch requires two legends. If the two legends consist of one lens and one body legend, lens legend must be specified in selection 12; body legend specified in selection 14. For legend options & codes, visit us at www.carlingtech.com. Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 Body legends not available on Soft surface actuators; White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. 3 Additional ratings available. See V-Series Switch Accessories page. 4 Contura II available with two square lenses. Consult factory for details. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | V-Series Contura Sealed Rocker Switches - Contura II & III Locking - Ordering Scheme V 1 D A S W 0 B 1 Series 2 Circuit 3 Rating 4 5 6 Termination Illumination Lock 7 Lamp 1 SERIES V 2 CIRCUIT ( ) - momentary Terminal Connections as viewed from bottom of switch: SP - single pole - uses terminals 1, 2 & 3. 8 terminal 10 terminal DP - double pole uses terminals 1, 2, 3, 4, 5 & 6. 8 - - 7 8 - - 7 Terminals 7, 8, 9 & 10 for lamp circuit only. 1 - - 4 1 - - 4 2 - - 5 2 - - 5 3 - - 6 3 - - 6 10 - - 9 Position: 1 2 3 SP DP 2 & 3, 5 & 6 Connected Terminals 1 & 2, 4 & 5 1A ON NONEOFF 4D ON NONEON 6J ON OFFON 7K ON OFF(ON) 8L (ON) OFF(ON) 9N OFF NONEON SPECIAL CIRCUITS H* 2 & 3 2 & 3, 5 & 4 5&4 G* 2 & 3, 5 & 6 2 & 3 OFF S* 2 & 3, 5 & 6 2 & 3 1&2 M* (2 & 3, 5 & 6) 2 & 3 OFF R* (2 & 3, 5 & 6) 2 & 3 2&1 E* 5 & 6 5 & 3 5&1 *Jumper between terminals 2 & 5 for circuits H,G,M,R & S are specified in selection 4. External jumper between terminals 2 & 4 for circuit E are provided by customer. Circuit E may be used for SP OFF-ON-ON circuit. 3 RATING 4 1 B C D E F M N .4VA @ 28VDC Resistive 15A 24V 20A 18V 20A 12V 20A 14V, 10A 14VT (circuit 1, 4 , A & D only) 10A 14V, 6A 14VT (circuit G only) .4VA/20A 12V .4VA/15A 24V 4 TERMINATION / BASE STYLE 8 term 10 Term Termination 12 .250 TAB (QC) no barriers AB .250 TAB (QC) with barriers JK .250 TAB (QC) no barriers 35 Solder Lug no barriers CD Solder Lug 56 Wire Leads no barriers EF Wire Leads Note: Codes J & K for circuits H, G & M. A Z E 00 8 Bracket 9 Actuator 10 Lens 11 Function 0 12 Legend 13 Legend Orientation 7 LAMP Lamp above terminals 3 & 6 end of switch No lamp 0 Neon 1 125VAC 2 250VAC Incandescent 4 3V 5 6V 6 12V 7 18V 8 24V LED* superbrightsuperbright Red AmberGreen Red 2VDC A LF R 6VDC B MG S 12VDC C NH T 24VDC D PJ V * Consult factory for “daylight bright” LED options. Typical current draw for LED is 20ma. 8 FLUSH BRACKET COLOR 1, PANEL SEAL Black White Gray No SealB W G One SealC Y H 9 HARD SURFACE ACTUATOR 1 BlackGray Red White Contura II A BGH Contura III C DEF 3,6 Actuator orientation above terminals: 1,4 10 LENS Z - No Lens ClearWhite Amber Green Red Blue 3 8 D J P V Lens color for LEDs must be clear, white, or match color of LED. Green or blue lenses are not recommended with Neon lamps. Jumper No No Yes T2 to 5 No No No No 5 ILLUMINATION & SWITCH SEALING Lamp #1:above terminals 1 & 4 end of switch.; Lamp #2 above terminals 3 & 6 end of switch. Positive (+) and negative (-) symbols apply to LED lamps only Sealed Unsealed Lamps Illumination Type Lamp wired to Terminals S 0 NONE – – C 3 2 UP 3 (+) 7 (–) H Z 2 INDEPENDENT 8 (+) 7 (–) DOUBLE POLE SWITCHES ONLY MR 1 UP 3 (+) 6 (–) 11 ACTUATOR LOCK FUNCTION AND COLOR 1 Lock Color Up Down Up & Down Center 3 Match Actuator A HR 1 Black BJ S 2 White CK T 3 Red DL V 4 Safety Orange EM W 5 12 ACTUATOR LENS OR BODY LEGEND 2 00 - No Legend 21 22 23 24 OFF ON O I 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. ORIENTATION OF ACTUATOR/LENS IN PANEL 13 LEGEND ORIENTATION 0 No legend (used with codes 21-28 in selection 12) 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 ORIENTATION 1 ORIENTATION 4 AZC45-1 AZC45-2 6 LOCK Lock above terminals 1 & 4 end of switch Wlock 45 45 Notes: Consult factory to verify horsepower rating for your particular circuit choice. 1 Custom colors are available. Consult factory. 2 White imprinting is standard on black actuators; Black imprinting is standard on white, red and gray actuators. Custom colors are available, consult factory. 3 Only available with 3 position circuits. Center OFF and special circuits only available with center position lock function. 4 Additional ratings available. See V-Series Switch Accessories page. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com ORIENTATION 3 ORIENTATION 2 V–Series Contura Sealed Rocker Switches - Contura II & III - Dimensional Specifications | 7 Dimensional Specifications: in. [mm] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 8 | V-Series Contura Sealed Rocker Switches - II to XIV - Circuit Diagrams Circuit Diagrams: CIRCUIT CIRCUIT DIAGRAM CIRCUIT CIRCUIT DIAGRAM 3 1 3 2 3 5 3 3 5 3 1 2 5 3 4 6 2 2 1 3 4 2 6 4 1 1 6 5 3 3 6 5 3 2 6 5 6 G SYMBOL LEGEND SYM. 2 3 S 2 7 6 5 2 F 1 5 2 5 3 1 2 6 R 2 6 4 3 5 E 3 6 M D 1 4 5 3 1 6 2 5 3 L 2 3 5 2 C 1 1 6 2 4 6 K 2 3 4 2 B 1 3 J 2 3 CIRCUIT DIAGRAM 1 6 A 2 CIRCUIT 2 5 DEFINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION 1 3 3 4 DESIGNATES MAINTAINED CIRCUITS DESIGNATES OTHER POSITION 8 H DESIGNATES MOMENTARY CIRCUITS DESIGNATES TWO POSITION CONNECTION 2 2 5 DESIGNATES EXTERNAL JUMPER PROVIDED BY CUSTOMER Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches - II to XIV - Lamp Circuit Diagrams, Hazard Warning Circuit Diagrams | 9 Lamp Circuit Diagrams: LAMP CIRCUIT CIRCUIT DIAGRAM LAMP CIRCUIT +8 +8 A/1 1 -7 1 +3 +3 SPECIAL #1 +3 2 2 M/R +1 +3 -4 2 H/Z SPECIAL #3 +1 +3 2 J/8 2 2 1 N/T SPECIAL #4 +3 1 -7 +3 -8 1 +6 1 +8 -6 -7 -7 2 -7 +8 2 +6 1 +1 +3 -4 P/V 2 -6 1 2 -7 -7 +8 +1 +3 1 2 K/W +6 1 U/Y 2 (-)7 -7 +8 +10 1 2 -7 -9 Hazard Warning Circuit Diagrams: CIRCUIT CIRCUIT DIAGRAM 1 17 18 10(-) 3 J1 1 2 5 3 14 11 13 CIRCUIT 10(-) J5 CIRCUIT DIAGRAM 1 3 5 1 5 3 11 13 3 14 11 13 3 14 15 12 JJ 6 16 JK 1 5 6 8 J3 2 8 17 18 10(-) 3 3 14 NOTE: J circuits are available for all non-locking V-Series styles. Consult factory for p/ n details. JA 1 5 CIRCUIT DIAGRAM 11 13 17 18 17 18 10(-) J2 1 CIRCUIT 2 2 8 8 17 18 10(-) SYMBOL LEGEND 1 J4 SYM. DEFINITION DESIGNATES TERMINALS AND CONTACTS DESIGNATES LAMP LOCATION 2 +6 1 +8 -6 +3 -7 C/3 CIRCUIT DIAGRAM -6 1 L/9 LAMP CIRCUIT -7 1 G/7 +3 E/5 -6 2 +8 -7 D/4 CIRCUIT DIAGRAM -7 +3 B/2 +3 1 F/6 LAMP CIRCUIT CIRCUIT DIAGRAM 5 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 2 10 | V-Series Contura Sealed Rocker Switches - Stand-Alone Components Reduce inventory levels and cost by stocking actuators and base switches separately. Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes. Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes. Contura VI Actuator with lenses and inserts only: VV with code selections 9-16 Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes. Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes. Panel Seal: VPS Contura X & XI actuators without lenses separately: VVR 6 1 00 1 1 Actuator Separately 2 3 Actuator Lens Style/Color Opening 4 Actuator Legend Contura XII actuators without lenses separately: VVP J 1 Z 21 1 00 5 Legend Orientation 1 Actuator 2 Style & Color 3 Lens Opening 4 Lens Opening 6 7 Legend Legend Orientation 5 Legend 1 CONTURA X & XI ACTUATOR SEPARATELY VVR 1 CONTURA XII ACTUATOR SEPARATELY VVP 2 ACTUATOR STYLE & COLOR Black Gray WhiteRed Contura X 1234 Contura XI 6789 2 ACTUATOR STYLE & COLOR JBlack K Gray N White M Red 3,4 LENS OPENING FOR Z No lens 1 Bar lens Square lens 3 LENS OPENING FOR 1 1 One bar lens 2 One bar lenses 3 One square lens 4 two square lens 5 square lens on top/ bar lens on bottom (Contura X only) 4 ACTUATOR LENS OR BODY LEGEND 00 - No Legend this location 11 ON 12 OFF 13 I 14 O OFF ON O I 15 O O 16 O O 17 O I 18 I O F N N F F F For additional legend options & codes, visit us at www.carlingtech.com. 5 LEGEND ORIENTATION 1 0 No legend 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 5, 7 LENS OR BODY LEGEND 2 00 - No Legend 21 22 OFF ON ORIENTATION 1 ORIENTATION 2 ORIENTATION 1 Contura X, XI & XII actuator lens assembly separately: ORIENTATION 4 VVL 2 1 00 0 ORIENTATION 2 1 Lens Separately bottom lens } 2 Lens Style 3 Lens Color 4 Legend 5 Legend Orientation 1 CONTURA X, XI & XII LENS SEPARATELY VVL 2 LENS STYLE 3 1 Bar lens 2 One Piece Square lens 3 Bottom of Two-Piece Square lens 5 1 TOP OF LENS SEPARATELY VVT top lens posts mount toward actuator stem ORIENTATION OF ACTUATOR/LENS IN PANEL 6 LEGEND ORIENTATION 3 0 No legend 1 Orientation 1 2 Orientation 2 3 White 3 TRANSLUCENT LENS COLOR 1 Clear2 White3 Amber4 Green 45 Red6 Blue 4 Contura X, XI & XII actuator lens assembly: actuator stem 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. ORIENTATION OF ACTUATOR/LENS IN PANEL 2 COLOR 1 Clear 2 Smoke 2 Color 24 I Contura X, XI & XII top piece of 2-piece lens separately: 1 Lens Separately 23 O ORIENTATION 3 VVT 1 2 4 LENS OR BODY LEGEND 2 00 - No Legend 21 22 OFF ON two piece lens assembly 23 O 24 I 1 piece lens/bar lens are positioned the same as bottom lens for assembly, minus the top lens. Lenses snap in from bottom. Notes: 1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 must be chosen. 2 Center of actuator marking not available for Contura XII. 3 Legend is not available for bar style lens. 4 Not recommended with neon lamps. 5 Must also order top piece of 2 piece square lens separately. 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. 5 LEGEND ORIENTATION 3 0 No legend 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 ORIENTATION OF ACTUATOR/LENS IN PANEL ORIENTATION 1 ORIENTATION 4 ORIENTATION 2 ORIENTATION 3 Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com V-Series Contura Sealed Rocker Switches - Accessories | 11 Easily integrate Contura products into your system, with Contura Accessories Q.C. SELECTION GUIDE PART NO Contura Connectors COMPANY SERIES WIRE RANGE TIN GUIDE PLAIN Q.C. SELECTION AWG PLATED BRASS PART NO BRASS COMPANY SERIES (REF) WIRE RANGE 12 02965580 ORIENTATION MM 2 3.0 ORIENTIN 02965471 (2)16-14 2GUIDE PLAIN TATION Q.C. SELECTION Q.C.12010601 SELECTION GUIDE Q.C. GUIDE MM(2)1.0-2.0 AWGSELECTION PLATED BRASS 02965470 16-14 (REF) 1.0-2.0 BRASS WIRE WIRE WIRE PART NO PART NO PART NO PACKARD 58 SERIES B RANGE .5-.8 RANGE 02965469 06288318RANGE 02965580 12 20-18 ORIEN3.0 COMPANY COMPANY ORIENTIN TIN 102TIN 5.0 12084590 2 SERIES PLAIN SERIES PLAIN PLAIN TATION TATION 02965471 PLATED 12010601 (2)16-14 (2)1.0-2.0 AWG MM AWG MM AWG MM 2 PLATED PLATED BRASS BRASS12052224 BRASS (REF) 3.0 BRASS BRASS 02965470 BRASS 16-14 12 1.0-2.0(REF) B (REF) COMPANY SERIES PACKARD 58 SERIES 02965580 0296558012015870 12 12 16-14 1.0-2.0 06288318 1202965580 20-18 3.0 .5-.8 3.0 PACKARD 02965469 12010601 12010601 12010601 (2)1.0-2.0 02965471 (2)16-14 (2)16-14 02965471 (2)16-14 02965471(2)1.0-2.0 12020035 (2)22-18 (2).5-.8 METRI-PACKPACKARD PACKARD PACKARD 10 1.0-2.0 5.0 B1.0-2.0 12084590 Q.C. SELECTION GUIDE 02965470 02965470 16-14 02965470 16-14 16-14 SERIES58 SERIES 58630 SERIES 58 SERIES 12015869 20-18 .5-.8 12015832 12052224 12 .5-.8 02965469 06288318 02965469 20-18 06288318 02965469 20-18 062883183.0 .5-.8 20-18 WIRE PART NO 12052222 20-22 .35-.5 12015870 16-14 RANGE 1.0-2.05.0 10 5.0 10 10 12084590 12084590 12084590 PACKARD COMPANY ORIENTIN 12052224 12052224 12 (2)22-18 3.012052224 12 3.0 12 2 PLAIN TATION METRI-PACK SERIES 12020035 (2).5-.8 1.3-3 AWG 16-12 MM Q.C. SELECTION GUIDE PLATED 60253-2 60253-1 BRASS 12015870 16-14 12015870 1.0-2.0 16-14 12015870 1.0-2.0 16-14 630PACKARD SERIES AMP BRASS PACKARD PACKARD 12015832 12015869 20-18 (2) .5-.8 (2) 1.3 16 (REF) WIRE 250 SERIES METRI-PACK 12020035 (2)22-18 12020035 (2).5-.8 (2)22-18 12020035 A (2).5-.8 (2)22-18 METRI-PACK 02965580 METRI-PACK PART NO 12 3.0 12052222 20-22RANGE .35-.5 20-18 630 SERIES 630 SERIES 630 SERIES42100-2 18-14 .8-2 FASTIN-FASTON 42100-1 12015869 20-18 12015869 20-18 12015869 12015832 12015832 12015832 COMPANY ORIEN12010601 (2)16-14.5-.8 (2)1.0-2.0 .5-.8 02965471 TIN PACKARD 2 .35-.5 SERIES PLAIN TATION 16-12 1.3-3 12052222 PLATED 20-22 12052222 20-22 12052222 20-22 60295-2 22-18 .3-.9 60295-1 02965470 16-14.35-.5 1.0-2.0 B AWG MM 58 SERIES 60253-1 60253-2 BRASS AMP (REF) BRASS 02965469 06288318 20-18 .5-.8 16-12 (2) 161.3-3 16-12 (2) 1.31.3-3 16-12 ORIENTATION TANG 3.0 (2)1.0-2.0 A B1.0-2.0 .5-.8 A B 5.0 TANG 3.0 1.0-2.0 A(2).5-.8B .5-.8 TANG TANG SYMBOL = TANG SHOWS ORIENTATION OF TANG IN SLOT SYMBOL TANG A TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT .35-.5 SYMBOL TANG SYMBOL =TANGSHOWS SYMBOL =TANG SYMBOL = ORIENTATION SHOWS OFORIENTATION TANG IN SHOWS SLOT OFORIENTATION TANG IN SLOT OF TANG IN SLOT 1.3-3 SYMBOL SYMBOL SYMBOL 60253-2 60253-2 60253-2 60253-1 60253-1 60253-1 250 SERIES AMPConsult Delphi AMP Packard AMP 12084590 NOTE: and/or Amp on actual part numbers and availability. B (2) 1.3 02965580 12 3.0 10 5.0 (2) 16 (2) 1.3 (2) 16 (2) 1.3 (2) 16 FASTIN-FASTON 42100-1 trademark 42100-2 18-14 .8-2 B 250 SERIES SERIES 250 SERIES B B AMP is 250 a registered of AMP Inc. Harrisburg, PA TANG 12010601 (2)16-14 (2)1.0-2.0 12052224 12 3.0 42100-2 18-14 42100-2 .8-218-14 42100-2 .8-218-14 .8-2 FASTIN-FASTON FASTIN-FASTON 42100-1 02965471 42100-1 42100-1 Delphi Packard is a FASTIN-FASTON registered trademark of Delphi-Packard Systems Warren, Ohio PACKARD 60295-1 60295-2 22-18 .3-.9 Electrical 16-14 1.0-2.0 B 12015870 16-14 .3-.9 1.0-2.0 60295-1 02965470 60295-2 22-18 60295-2 22-18 60295-2 .3-.9 22-18 .3-.9 60295-1 60295-1 58 SERIES PACKARD 02965469 METRI-PACK 06288318 12020035 20-18 (2)22-18 .5-.8 (2).5-.8 A NOTE: Delphi Packard and/or Amp on actual part numbers and availability. .820[20.83] 630 SERIES NOTE:Consult Consult Delphi NOTE: Packard Consult and/or Delphi NOTE: Amp Packard Consult on actual and/or Delphi part Amp numbers Packard on actual and/or and part availability. Amp numbers on actual and part availability. numbers and availability. 12015869 20-18 .5-.8 12015832 10 5.0 12084590 .820[20.83] AMP a registered registered trademark oftrademark AMP Inc.ofHarrisburg, PA AMP is is a AMP trademark is a registered of AMP AMP Inc. is Harrisburg, a registered AMP PA trademark Inc. Harrisburg, of AMP PAInc. Harrisburg, PA TANG 12052224 12of 3.0 of 12052222 20-22 .35-.5 Delphi Packard Packard is is Delphi a registered Packard trademark is trademark Delphi a registered ofPackard Delphi-Packard trademark is a registered Electrical Delphi-Packard trademark Systems Electrical Warren, Delphi-Packard Systems Ohio Warren, Electrical Warren, Ohio Systems Ohio ORIENTATION OF TANG IN SLOT Delphi a registered of Delphi-Packard Electrical Systems TANGOhio SYMBOL Warren, = SHOWS 12015870 1.0-2.0 16-14 16-12 1.3-3 PACKARD SYMBOL 60253-2 60253-1 AMP .820[20.83] .820[20.83] (2)22-18 (2).5-.8 A METRI-PACK (2) 16 (2) 1.3 .820[20.83] .820[20.83] .820[20.83]12020035 .820[20.83] 250.820[20.83] SERIES B 630 SERIES .820[20.83] 12015869 20-18 .5-.8 12015832 42100-2 18-14 .8-2 FASTIN-FASTON 42100-1 12052222 20-22 .35-.5 60295-2 22-18 .3-.9 60295-1 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 16-12 1.3-3 SYMBOL NOTE: AMP Consult Delphi Packard Amp on actual part numbers and availability. 60253-1and/or60253-2 .770[19.56] (2) 16 PA (2) 1.3 AMP is a registered trademark of AMP Inc. Harrisburg, 250 SERIES Delphi Packard is a registered trademark Electrical Systems B Warren, Ohio 42100-2 of Delphi-Packard 18-14 .8-2 FASTIN-FASTON 42100-1 .920[23.37] 60295-1 .920[23.37] .820[20.83] .920[23.37] A A A 22-18 .820[20.83] .920[23.37] .920[23.37] NOTE: Consult Delphi Packard and/or Amp on actual partAnumbers and availability. AMP is a registered trademark of AMP Inc. Harrisburg, PA VC2 A A A A A .920[23.37] .920[23.37] PACKARD 630 Delphi Electrical Systems Warren, Ohio VC1Packard is a registered trademark of Delphi-Packard VC1 .920[23.37] PACKARDPACKARD 630 630 PACKARD 630 VC1 B VC1 B AMP, PACKARD AMP, PACKARD 58 58 PACKARD 630 VC1 VC1 B B .820[20.83] A AMP, 58 AMP, PACKARD 58 AMP, PACKARD AMP, PACKARD 58 58 PACKARD AMP, PACKARD 58 VC1 B VC2 PACKARD 630 B AMPAMP, PACKARD 58 AMP AMP AMPAMP AMP AMP VC2 10 10 3 23 1VC1 1053 630 6729 417VC1 845 56 96 9 10 73 4 2 51 689 10 10 3 3 2 128 1 7104 8 3 5 2 619 8 7 4 28 10 1 38 2 1 784PACKARD .920[23.37] 1.266[32.16] 5 B AMP AMP, PACKARD 58 679 VC2 4 73 45 2 1.266[32.16] 1.466[37.24] 1.266[32.16] .770[19.56] .950[24.13] B 69 15 8 6 A PACKARD 630 VC2 9 .920[23.37] B 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.266[32.16] A VC2 VC2 .820[20.83] B 1.170[29.72] 1.170[29.72] 1.170[29.72] A PACKARD 630 VC2 VC2 PACKARD 630 B 1.170[29.72] A VC2 VC1 .770[19.56] .770[19.56] .920[23.37] .3-.9 .920[23.37] PACKARD 630 PACKARD 630 B 60295-2 .770[19.56] .770[19.56] B A B B B AMP, 58 PACKARD 58AMP, PACKARD 58 AMP, PACKARDPACKARD 58 AMP, AMP, PACKARD PACKARD 58 630 3 2 1 8 7 3 4 235 1 62 8 1.466[37.24] 1 87 4 .950[24.13] 1.170[29.72] 1.466[37.24] 1.266[32.16] A A A 1.170[29.72] PACKARD 630 PACKARD 630 .950[24.13] .950[24.13] .950[24.13] PACKARD 630 1.466[37.24] 1.250[31.75] B PACKARD 630 A PACKARD PACKARD 630 630 1.250[31.75] 5 A B B AMP, PACKARD 58 AMP, PACKARD PACKARD 630 58 6 7 4 5 6 7 4 5 6 1.250[31.75]B AMP 1.266[32.16] 1.466[37.24] .770[19.56] 1.250[31.75] AMP, PACKARD 58 AMP, PACKARD 58 10MARKING 3 2 DETAIL 1A 8 MARKING DETAIL 7MARKING 4DETAIL 5DETAIL 69 A 10 3 VC22 1 DETAIL 8 7 4 5 6MARKING 9 MARKING 3 2MARKING 1 8 DETAIL 7 4 5DETAIL 6 MARKING MARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING MARKING DETAIL MARKING DETAIL DETAIL DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING AMP, PACKARD 58 1.466[37.24] AMP, PACKARD 58 AMP A PACKARD 630 FRONT VIEWB MARKING PACKARD 630 VC1 FRONT VIEW DETAIL 1.266[32.16] FRONT VIEW AMP, PACKARD 58 1.466[37.24] REAR VIEW B 7 4 CONNECTOR HOUSING 5 69 1.466[37.24] PACKARD 630 REAR VIEWMARKING FRONT REAR VIEW VIEW .950[24.13] FRONT VIEW DETAIL 1.466[37.24] REAR VIEW B AMP, PACKARD 58 AMP (For AMP terminals only) MARKING DETAIL REAR VIEW VC2 AMP CONNECTOR HOUSING MARKING DETAIL (For AMP terminals only) REAR VIEW 10 3 2 1VC2 8 7 4 5 69 CONNECTOR HOUSING VC2 1.266[32.16] 1.466[37.24] CONNECTOR (For AMP HOUSING terminals only) MARKING DETAIL FRONT VIEW AMP Contura X Boot (P/N VB1-01) MARKING DETAIL FRONT VIEW FRONT REAR VIEW VIEW DETAIL 1.170[29.72] REAR FRONT VIEW VIEW MARKING B REAR VIEW DETAIL 1.250[31.75] FRONT VIEW MARKING DETAIL FRONT VIEW 1.050[26.67] VC1 CONNECTOR HOUSING 1.050[26.67] VC2 CONNECTOR HOUSING (For AMP terminals only) MARKING DETAIL B FRONT AMP, PACKARDVIEW 58 3 2 1 8 REAR VIEW MARKING DETAIL REAR VIEW AMP, PACKARD 58 10 3 2 1 8 VC2 7 VC2 4 5 69 VCH VC2 VCH 3 VCH 2 1 8 7 4 5 6 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A A MARKING DETAIL MARKING DETAIL MARKING DETAIL VCH 1.250[31.75] 1.266[32.16] 1.466[37.24] PACKARD 630 PACKARD 630 (For AMP terminals (Foronly) AMP terminals (For only) AMP terminals only) VC2 VC2 VC2 FRONT VIEW REAR VIEW FRONT VIEW .950[24.13] AMP, PACKARD 58 FRONT VIEW FRONT VIEW MARKING 1.266[32.16] .920[23.37] FRONT VIEW AMP MARKING DETAIL REAR VIEW AMP, PACKARD 58 VC1 10 3 2 1 8 VC1 CONNECTOR HOUSING 1.266[32.16] FRONT REARVIEW VIEW AMP, PACKARD 58 8 7 4 5 69 VC1 10 3 2 1 VC1 VC1 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A MARKING DETAIL MARKING DETAIL A 1.266[32.16] 1.466[37.24] VC1 PACKARD 630 PACKARD 630 VC1 FRONT VIEW REAR VIEW VC1 B CONNECTOR HOUSING MARKING DETAIL A PACKARD 630 VC1 REARFRONT VIEW VIEW REAR B VIEW MARKING DETAIL .920[23.37] MARKING DETAIL REAR VIEW CONNECTOR HOUSING MARKING DETAIL B REAR VIEW AMP, PACKARD 58 VCH 7 4 5 6 HOUSING VCH CONNECTOR 1.250[31.75] CONNECTOR HOUSING Additional V-Series Ratings MARKING DETAIL REAR VIEW 1.050[26.67] 1 MARKING DETAIL FRONT VIEW MARKING DETAIL REAR VIEW VCH CONNECTOR HOUSING .4VA @ 28VDC Resistive VB1-01 VB1-01 4VB1-01 10A 250VAC 1/2 HP, 15A 125 CONTURA X BOOT CONTURA X BOOT CONTURA X BOOT VAC 1/2 HP, No Agency Listings 10A 250VAC 1/2 HP, 15A 125 VAC 1/2 HP, UL Recognized, CSA Certified 15A 125VAC 1/2 HP, 12(2)A 125 VAC μ T85 1.050[26.67] 15A 125VAC 1/2VB1-01 HP, 12(6)A 125 VAC T85 72 VB1-01 2.000[50.80] CONTURA X BOOT 2 .757[19.23] .757[19.23] 250VAC, 15A 125VAC, 8 10A CONTURA X BOOT 1/2 HP 125-250VAC, 12(2)A 250 VAC μ T85 2.000[50.80] 1.050[26.67].757[19.23] 2 VB1-01 15A 125VAC, 1/2 HP 125-250VAC, 12(6)A 250 VAC T85 9 10A 250VAC, 2.000[50.80] CONTURA X BOOT B VB1-01 15A 24V 2.000[50.80] CONTURA X BOOT C 20A 18V .757[19.23] D 20A 12V .757[19.23] E 20A 14V, 10A 14VT (circuits 1, 4, A, & D only) 3.99 [101.35] 3.99 [101.35] .757[19.23] 3.99 [101.35] F 10A 14V, 6A, 14VT (circuit G only) .757[19.23] GVRT 20A 6V VRT VRT ACTUATOR ACTUATOR ACTUATOR REMOVAL H REMOVAL 20A 3V REMOVAL 3.99 [101.35] .900 [22.86] .900 [22.86] .900 [22.86] TOOL TOOL TOOL L bracket) 15A 10A 250VAC, (For flush (For125 flush VAC, bracket) (For flush bracket) 1/2 HP 125-250 VAC; 6A 125 VAC L M VRT.4VA/20A 12V (combi-contact) ACTUATOR REMOVAL .900 [22.86] TOOL (combination gold/silver contacts for borderline dry circuit applications) (For flush bracket) 3.99 [101.35] N .4VA/15A 24V (combi-contact) 3.99 [101.35] VRT(combination gold/silver contacts for borderline dry circuit applications) 3.99 [101.35] 2.000[50.80] 2.000[50.80] 1.050[26.67] 2.000[50.80] 1.050[26.67] 51 62 Contura II, III, IV & V Actuator Removal Tool (P/N VRT) TOP TOP TOP INSERT POINTS UNDER INSERT POINTS UNDER INSERT POINTS UNDER ACTUATOR ACTUATOR ACTUATOR HOLD FLUSH ON BRACKET ANDHOLD PUSH FLUSH ON BRACKET AND HOLD PUSH FLUSH ON BRACKET AND PUSH IN IN IN TOP TOP TOP TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN TOP TOP TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN TOP TOP ACTUATOR REMOVAL TOOL (For flush bracket) VRT ACTUATOR REMOVAL VRT NOTESACTUATOR .900 [22.86] TOOL REMOVAL Consult factory to determine availability for individual circuits and their HP rating. (For flush bracket) .900 [22.86] TOOL flush with bracket) 1. Not (For avaiable Contura 7 or 14 rocker styles. .900 [22.86] INSERT POINTS UNDER TOP ACTUATOR INSERT HOLD POINTSFLUSH UNDER ON BRACKET AND PUSH IN ACTUATOR HOLD FLUSH ON BRACKET AND PUSH TOP IN Ratings 6 - 9 are UL, CSA & VDE certified, require terminations A or B for double pole circuits, & are not available with illumination circuits 4, 8, D, J, N, & T or with wire lead or solder lug terminations. Circuits 1, 4, A, D, H, M & E are not available with rating 6 & 8. Rating 7 & 9 only available with circuits 1, 4, A & D. Circuits 2, 3, 5, 7, 8, K, L are 1/2 HP 250VAC only with rating 8. Ratings 6 & 7 must specify lamp code 1 (125VAC neon). Ratings 8 & 9 must specify lamp code 2 (250VAC neon). Rating L available with circuits 1, 4, A & D only. 2. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 12 | V-Series Contura Sealed Rocker Switches - Accessories Contura Mounting Panels Dimensional Specifications: in. [mm] Contura Hole Plug Dimensional Specifications: in. [mm] 1.450 [36.83] .830 [21.08] TEST CUT HOLE IN ACTUAL MATERIAL VHP CONTURA II,III HOLE PLUG 1.240 [31.50] 1.820 [46.23] .430 [10.92] VHP CONTURA II,III HOLE PLUG VH1 STANDARD HOLE PLUG (No wing serrations) (With VC1 connector attached) 2.000 [50.80] VH2 STANDARD HOLE PLUG (With wing serrations) 1.067 [27.10] 1.928 [48.97] VH3 CONTURA IV HOLE PLUG (No wing serrations) VH4 CONTURA IV HOLE PLUG (With wing serrations) DETAIL VIEW VH1,VH3 & VH5 HOLE PLUGS (No wing serrations for ease of removal) 1.020 [25.91] VH5 CONTURA V HOLE PLUG (No wing serrations) VH6 CONTURA V HOLE PLUG (With wing serrations) DETAIL VIEW VH2,VH4 & VH6 HOLE PLUGS (With wing serrations) Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Reps & Contact | 13 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016