V-Series Contura Sealed Rocker Switches - Stand-Alone Components Reduce inventory levels and cost by stocking actuators and base switches separately. Contura II, III, IV, V, VI, VII, X, XI, XII, XIV Base switches separately: specify V with code selections 2-8 in the ordering schemes. Contura II, III, IV, V Actuator only: VV with code A or C for selection 9, & with selections 10-14 in the ordering schemes. Contura VI Actuator with lenses and inserts only: VV with code selections 9-16 Contura II, III, IV, V, VII Actuator only: VV with code A, C, E, G, P or Z for selection 9 & with selections 10-14 in the ordering schemes. Contura X, XI, XII, XIV actuators with lenses separately: VV with code selections 9-14 in the ordering schemes. Panel Seal: VPS Contura X & XI actuators without lenses separately: VVR 6 1 00 1 1 Actuator Separately 2 3 Actuator Lens Style/Color Opening 4 Actuator Legend 5 Legend Orientation Contura XII actuators without lenses separately: VVP J 1 Z 21 1 00 1 Actuator 2 Style & Color 3 Lens Opening 4 Lens Opening 6 7 Legend Legend Orientation 5 Legend 1 CONTURA X & XI ACTUATOR SEPARATELY VVR 1 CONTURA XII ACTUATOR SEPARATELY VVP 2 ACTUATOR STYLE & COLOR Black Gray Contura X 1 2 Contura XI 6 7 2 ACTUATOR STYLE & COLOR J Black K Gray N White M 3,4 LENS OPENING FOR Z No lens 1 Bar lens Square lens 3 LENS OPENING FOR 1 1 One bar lens 2 One bar lenses 3 One square lens 4 two square lens White 3 8 5 Red 4 9 square lens on top/ bar lens on bottom (Contura X only) 4 ACTUATOR LENS OR BODY LEGEND 00 - No Legend this location 11 ON 12 OFF 13 I 14 O OFF ON O I 15 O O 16 O O 17 O I 18 I O F N N F F F For additional legend options & codes, visit us at www.carlingtech.com. 5 LEGEND ORIENTATION 1 0 No legend 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 ORIENTATION OF ACTUATOR/LENS IN PANEL ORIENTATION 1 ORIENTATION 4 ORIENTATION 2 2 Color 1 TOP OF LENS SEPARATELY VVT 2 COLOR 1 Clear 2 Smoke 3 White Contura X, XI & XII actuator lens assembly: actuator stem posts mount toward actuator stem top lens bottom lens } 23 O two piece lens assembly 1 piece lens/bar lens are positioned the same as bottom lens for assembly, minus the top lens. Lenses snap in from bottom. Notes: 1 If actuator lens opening for 2 bar or 2 square lenses, legend orientation 0,1, or 2 must be chosen. 2 Center of actuator marking not available for Contura XII. 3 Legend is not available for bar style lens. 4 Not recommended with neon lamps. 5 Must also order top piece of 2 piece square lens separately. 6 LEGEND ORIENTATION 3 0 No legend 1 Orientation 1 2 Orientation 2 ORIENTATION OF ACTUATOR/LENS IN PANEL ORIENTATION 1 ORIENTATION 2 VVL 2 1 00 0 2 Lens Style 3 Lens Color 4 Legend 5 Legend Orientation 1 CONTURA X, XI & XII LENS SEPARATELY VVL 2 LENS STYLE 3 1 Bar lens 2 One Piece Square lens 3 Bottom of Two-Piece Square lens 5 3 TRANSLUCENT LENS COLOR 1 Clear 2 White 3 Amber 4 LENS OR BODY LEGEND 2 00 - No Legend 21 22 OFF ON 4 Green 4 23 O 5 Red 6 Blue 4 24 I 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. 5 LEGEND ORIENTATION 3 0 No legend 1 Orientation 1 2 Orientation 2 3 Orientation 3 4 Orientation 4 ORIENTATION OF ACTUATOR/LENS IN PANEL ORIENTATION 1 ORIENTATION 4 ORIENTATION 2 ORIENTATION 3 www.carlingtech.com 24 I 25 O 26 O 27 O 28 I F N F For additional legend options & codes, visit us at www.carlingtech.com. 1 Lens Separately Contura X, XI & XII top piece of 2-piece lens separately: 1 Lens Separately 5, 7 LENS OR BODY LEGEND 2 00 - No Legend 21 22 OFF ON Contura X, XI & XII actuator lens assembly separately: ORIENTATION 3 VVT 1 2 Red V-Series Contura Sealed Rocker Switches - Accessories Easily integrate Contura products into your system, with Contura Accessories Q.C. SELECTION GUIDE PART NO Contura Connectors COMPANY SERIES WIRE RANGE TIN GUIDE PLAIN Q.C. SELECTION AWG PLATED BRASS PART NO BRASS 02965580 COMPANY SERIES ORIENTATION MM 2 (REF) WIRE RANGE 12 3.0 ORIENTIN (2)16-14 02965471 2GUIDE TATION PLAIN Q.C. SELECTION Q.C.12010601 SELECTION GUIDE Q.C. GUIDE MM(2)1.0-2.0 AWGSELECTION PLATED BRASS 02965470 16-14 (REF) 1.0-2.0 BRASS WIRE WIRE WIRE PART NO PART NO PART NO PACKARD 58 SERIES B RANGE .5-.8 RANGE 02965469 06288318RANGE 02965580 12 20-18 ORIEN3.0 COMPANY COMPANY ORIENTIN TIN 102TIN 5.0 2 12084590 SERIES SERIES TATION TATION PLAIN PLAIN PLAIN 02965471 PLATED 12010601 (2)16-14 (2)1.0-2.0 AWG MM AWG MM AWG MM 2 PLATED PLATED BRASS BRASS12052224 BRASS (REF) 3.0 BRASS BRASS B (REF) 02965470 BRASS 16-14 12 1.0-2.0(REF) COMPANY SERIES PACKARD 58 SERIES ORIENTATION TANG 0296558012015870 12 12 3.0 16-14 1.0-2.0 06288318 1202965580 20-18 3.0 .5-.8 3.0 PACKARD 02965469 12010601 12010601 12010601 (2)1.0-2.0 02965471 (2)16-14 (2)16-14 (2)1.0-2.0 02965471 (2)16-14 02965471(2)1.0-2.0 12020035 (2)22-18 (2).5-.8 A METRI-PACKPACKARD PACKARD PACKARD 10 1.0-2.0 5.0 B1.0-2.0 12084590 Q.C. SELECTION GUIDE B B 02965470 02965470 16-14 02965470 16-14 16-14 1.0-2.0 SERIES58 SERIES 58630 SERIES 58 SERIES TANG 12015869 20-18 .5-.8 12015832 12 .5-.8 12052224 02965469 06288318 02965469 20-18 06288318 02965469 20-18 062883183.0 .5-.8 20-18 .5-.8 WIRE PART NO RANGE 12052222 20-22 .35-.5 16-14 5.0 1.0-2.05.0 12015870 10 10 10 5.0 12084590 12084590 12084590 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT PACKARD COMPANY ORIENTANG TANG TANG TIN12052224 12052224 12 (2)22-18 3.012052224 12 3.0 12 2 PLAIN TATION (2).5-.8 A 3.0 METRI-PACK SERIES 12020035 1.3-3 AWG 16-12 MM Q.C. SELECTION GUIDE PLATED SYMBOL 60253-2 60253-1 BRASS 12015870 BRASS 12015870 12015870 16-14 1.0-2.0 16-14 1.0-2.0 16-14 1.0-2.0 630PACKARD SERIES AMP PACKARD PACKARD 20-18 (2) .5-.8 (2) 1.3 12015832 12015869 16 (REF) WIRE 250 SERIES 12020035 1202003512 (2).5-.8 12020035 METRI-PACK (2)22-18 A(2).5-.8 (2)22-18 A(2).5-.8B A METRI-PACK 02965580 METRI-PACK PART NO (2)22-18 3.0 20-22RANGE .35-.5 20-18 12052222 630 SERIES 630 SERIES 630 SERIES42100-2 18-14 .8-2 FASTIN-FASTON 42100-1 12015869 12015869 12015869 12015832 20-18 20-18 .5-.8 12015832 12015832 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT COMPANY ORIEN12010601 (2)16-14.5-.8 (2)1.0-2.0 .5-.8 02965471 TIN PACKARD 2 SERIES TATION PLAIN 16-12 1.3-3 12052222 PLATED 12052222 12052222 20-22 20-22 20-22 .35-.5 60295-2 22-18 .3-.9 60295-1 B 02965470 16-14.35-.5 1.0-2.0 AWG MM .35-.5 SYMBOL TANG SYMBOL =TANGSHOWS SYMBOL =TANG SYMBOL = ORIENTATION SHOWS OFORIENTATION TANG IN SHOWS SLOT OFORIENTATION TANG IN SLOT OF TANG IN SLOT 58 SERIES 60253-1 BRASS 60253-2 AMP (REF) BRASS 02965469 06288318 20-18 .5-.8 16-12 (2) 1.3-3 16-12 1.3-3 16-12 1.3-3 16 (2) 1.3 SYMBOL SYMBOL SYMBOL 60253-2 60253-2 60253-2 60253-1 60253-1 60253-1 250 SERIES AMPConsult Delphi AMP Packard AMP 12084590 NOTE: and/or Amp on actual part numbers and availability. B (2) 1.3 02965580 12 3.0 10 5.0 (2) 16 (2) 1.3 (2) 16 (2) 1.3 (2) 16 18-14 .8-2 B FASTIN-FASTON 42100-1 trademark 42100-2 250 SERIES SERIES 250 SERIES B B AMP is 250 a registered of AMP Inc. Harrisburg, PA TANG 12010601 (2)16-14 (2)1.0-2.0 12052224 12 3.0 42100-2 42100-2 42100-2 FASTIN-FASTON FASTIN-FASTON 42100-1 02965471 18-14 .8-218-14 .8-218-14 .8-2 42100-1 42100-1 Delphi Packard is 02965470 a FASTIN-FASTON registered trademark of Delphi-Packard Systems Warren, Ohio PACKARD 22-18 .3-.9 Electrical 60295-1 60295-2 B 16-14 1.0-2.0 12015870 16-14 1.0-2.0 02965580 60295-1 58 SERIES PACKARD METRI-PACK 60295-2 60295-1 02965469 60295-2 60295-2 22-18 22-18 60295-1 .3-.9 06288318 12020035 20-18 (2)22-18 .3-.9 22-18 .5-.8 (2).5-.8 .3-.9 A NOTE: Delphi Packard and/or Amp on actual part numbers and availability. .820[20.83] 630 SERIES NOTE:Consult Consult Delphi NOTE: Packard Consult and/or Delphi NOTE: Amp Packard Consult on actual and/or Delphi part Amp numbers Packard on actual and/or and part availability. Amp numbers on actual and part availability. numbers and availability. 12015869 20-18 .5-.8 12015832 10 5.0 12084590 .820[20.83] AMP a registered registered trademark oftrademark AMP Inc.ofHarrisburg, PA AMP is is a AMP trademark is a registered of AMP AMP Inc. is Harrisburg, a registered AMP PA trademark Inc. Harrisburg, of AMP PAInc. Harrisburg, PA TANG 12052224 12of 3.0 of 20-22 .35-.5 12052222 Delphi Packard Packard is is Delphi a registered Packard trademark is trademark Delphi a registered ofPackard Delphi-Packard trademark is a registered Electrical Delphi-Packard trademark Systems Electrical Warren, Delphi-Packard Systems Ohio Warren, Electrical Warren, Ohio Systems Ohio ORIENTATION OF TANG IN SLOT Delphi a registered of Delphi-Packard Electrical Systems TANGOhio SYMBOL Warren, = SHOWS 12015870 16-14 1.0-2.0 16-12 1.3-3 PACKARD SYMBOL 60253-2 60253-1 AMP .820[20.83] .820[20.83] (2)22-18 (2).5-.8 A METRI-PACK (2) 16 (2) 1.3 .820[20.83] .820[20.83] .820[20.83]12020035 .820[20.83] 250.820[20.83] SERIES B 630 SERIES .820[20.83] 12015869 20-18 .5-.8 12015832 18-14 .8-2 42100-2 FASTIN-FASTON 42100-1 20-22 .35-.5 12052222 22-18 .3-.9 60295-2 60295-1 TANG SYMBOL = SHOWS ORIENTATION OF TANG IN SLOT 16-12 1.3-3 SYMBOL NOTE: AMP Consult Delphi Packard Amp on actual part numbers and availability. 60253-1and/or60253-2 .770[19.56] (2) 16 PA (2) 1.3 AMP is a registered trademark of AMP Inc. Harrisburg, 250 SERIES Delphi Packard is a registered trademark Electrical Systems B Warren, Ohio 18-14 .8-2 42100-2 of Delphi-Packard FASTIN-FASTON 42100-1 .920[23.37] 60295-1 .920[23.37] .820[20.83] .920[23.37] A A AMP, PACKARD AMP, PACKARD 58 PACKARDPACKARD 630 630 PACKARD 630 VC1 B .820[20.83] .920[23.37] .920[23.37] .920[23.37] 58 VC1 B B PACKARD 630 VC1 VC1 B .820[20.83] A AMP, 58 AMP, PACKARD 58 AMP, PACKARD AMP, PACKARD 58 58 PACKARD AMP, PACKARD 58 VC1 B VC2 PACKARD 630 B VC1 1.266[32.16] .920[23.37] AMPAMP, PACKARD 58 AMP A VC2 VC2 .820[20.83] 1.266[32.16] 1.466[37.24] 1.266[32.16] 1.466[37.24] 1.266[32.16] AMP AMPAMP .920[23.37] B 1.466[37.24] 1.266[32.16] 1.266[32.16] 1.170[29.72] VC2 AMP 1.466[37.24] 1.266[32.16] 5 AMP PACKARD 630 VC2 B AMP AMP, PACKARD 58 679 VC2 4 73 45 2 1.466[37.24] A VC2 69 15 8 6 9 A PACKARD 630 .770[19.56] .950[24.13] B .770[19.56] .770[19.56] 1.170[29.72] A VC2 B .920[23.37] VC2 10 10 3 23 1VC1 1053 630 6729 417VC1 845 56 96 9 10 73 4 2 51 689 10 10 3 3 2 128 1 7104 8 3 5 2 619 8 7 4 28 10 1 38 2 1 784PACKARD PACKARD 630 B .3-.9 .920[23.37] NOTE: Consult Delphi Packard and/or Amp on actual partAnumbers and availability. A AMP is a registered trademark of AMP Inc. Harrisburg, PA VC2 A A A A A .920[23.37] .920[23.37] PACKARD 630 PACKARD 630 Delphi Electrical Systems Warren, Ohio VC1Packard is a registered trademark of Delphi-Packard VC1 PACKARD 630 B 22-18 60295-2 .770[19.56] .770[19.56] 1.170[29.72] 1.170[29.72] A A 1.170[29.72] PACKARD 630 PACKARD 630 .950[24.13] .950[24.13] .950[24.13] PACKARD 630 B A B B B AMP, 58 PACKARD 58AMP, PACKARD 58 AMP, PACKARDPACKARD 58 AMP, AMP, PACKARD PACKARD 58 630 8 7 3 4 235 1 62 8 1.466[37.24] 1.250[31.75] B 1.250[31.75] 3 2 1 1 87 4 .950[24.13] 1.170[29.72] A A PACKARD PACKARD 630 630 5 A 6 B AMP, PACKARD PACKARD 630 58 7 4 5 B 6 PACKARD 630 AMP, PACKARD 58 AMP 1.266[32.16] 1.466[37.24] .770[19.56] 1.250[31.75] AMP, PACKARD 58 AMP, PACKARD 58 10MARKING 3 2 DETAIL 1A 8 MARKING DETAIL 7MARKING 4DETAIL 5DETAIL 69 A 10 3 VC22 1 DETAIL 8 7 4 5 6MARKING 9 MARKING 3 2MARKING 1 8 DETAIL 7 4 5DETAIL 6 MARKING MARKING DETAIL MARKING MARKING DETAIL DETAIL MARKING MARKING DETAIL MARKING DETAIL DETAIL DETAIL MARKING DETAIL MARKING DETAIL MARKING DETAIL MARKING AMP, PACKARD 58 PACKARD 630 FRONT VIEWB MARKING VC1 FRONT VIEW DETAIL 1.266[32.16] FRONT VIEW AMP, PACKARD 58 1.466[37.24] AMP, PACKARD 58 PACKARD 630 VC1 REARFRONT VIEW VIEW REAR B VIEW MARKING DETAIL .920[23.37] 1.466[37.24] REAR VIEW AMP, PACKARD 58 8 7 4 5 69 VC1 10 3 2 1 VC1 VC1 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A MARKING DETAIL MARKING DETAIL A 1.266[32.16] 1.466[37.24] VC1 PACKARD 630 PACKARD 630 VC1 FRONT VIEW REAR VIEW VC1 B CONNECTOR HOUSING MARKING DETAIL FRONT VIEW AMP, PACKARD 58 VC1 10 3 2 1 8 VC1 CONNECTOR HOUSING 1.266[32.16] CONNECTOR HOUSING MARKING DETAIL FRONT VIEW AMP B MARKING DETAIL REAR VIEW AMP, PACKARD 58 7 4 5 VC2 A PACKARD 630 REAR VIEWMARKING FRONT REAR VIEW VIEW .950[24.13] FRONT VIEW DETAIL 1.466[37.24] REAR VIEW B AMP CONNECTOR HOUSING MARKING DETAIL (For AMP terminals only) REAR VIEW 10 3 2 1VC2 8 7 4 5 69 CONNECTOR HOUSING VC2 1.266[32.16] 1.466[37.24] CONNECTOR (For AMP HOUSING terminals only) MARKING DETAIL FRONT VIEW AMP AMP (For AMP terminals only) MARKING DETAIL FRONT VIEW Contura X Boot (P/N VB1-01) 1.050[26.67] 1.050[26.67] VC2 CONNECTOR HOUSING (For AMP terminals only) 2.000[50.80] FRONT REAR VIEW VIEW DETAIL 1.170[29.72] B 2.000[50.80] 1.050[26.67] 2.000[50.80] 1.050[26.67] MARKING DETAIL REAR VIEW AMP, PACKARD 58 MARKING DETAIL B FRONT AMP, PACKARDVIEW 58 3 2 1 8 4 5 6 PACKARD 630 REAR FRONT VIEW VIEW MARKING REAR VIEW DETAIL 1.250[31.75] FRONT VIEW 10 3 2 1 8 VC2 7 VC2 4 5 69 VCH VC2 VCH 3 VCH 2 1 8 7 4 5 6 CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING CONNECTOR HOUSING A A MARKING DETAIL MARKING DETAIL MARKING DETAIL VCH 1.250[31.75] 1.266[32.16] 1.466[37.24] PACKARD 630 PACKARD 630 (For AMP terminals (For AMP terminals only) (Foronly) AMP terminals only) VC2 VC2 VC2 FRONT VIEW REAR VIEW FRONT VIEW .950[24.13] 69 VC1 CONNECTOR HOUSING FRONT VIEW MARKING 1.266[32.16] .920[23.37] FRONT VIEW AMP 1.466[37.24] MARKING DETAIL REAR VIEW A FRONT REARVIEW VIEW 7 1.250[31.75]B REAR VIEW MARKING AMP, PACKARD 58 DETAIL REAR VIEW MARKING DETAIL REAR VIEW CONNECTOR HOUSING MARKING DETAIL B REAR VIEW AMP, PACKARD 58 VCH 7 4 5 6 HOUSING VCH CONNECTOR 1.250[31.75] CONNECTOR HOUSING MARKING DETAIL FRONT VIEW MARKING DETAIL REAR VIEW Additional V-Series Ratings 1.050[26.67] 1 VCH CONNECTOR HOUSING .4VA @ 28VDC Resistive VB1-01 VB1-01 4VB1-01 10A 250VAC 1/2 HP, 15A 125 CONTURA X BOOT CONTURA X BOOT CONTURA X BOOT 51 VAC 1/2 HP, No Agency Listings 15A 125VAC 1/2 HP, 12(2)A 125 VAC μ T85 15A 125VAC 1/2VB1-01 HP, 12(6)A 125 VAC T85 72 .757[19.23] .757[19.23] 10A 250VAC, 15A 125VAC, 8 CONTURA X BOOT 1/2 HP 125-250VAC, 12(2)A 250 VAC μ T85 2.000[50.80] 1.050[26.67].757[19.23] 2 VB1-01 15A 125VAC, 1/2 HP 125-250VAC, 12(6)A 250 VAC T85 10A 250VAC, 9 2.000[50.80] CONTURA X BOOT B VB1-01 15A 24V 2.000[50.80] CONTURA X BOOT C 20A 18V .757[19.23] D 20A 12V .757[19.23] E 20A 14V, 10A 14VT (circuits 1, 4, A, & D only) 3.99 [101.35] 3.99 [101.35] .757[19.23] 3.99 [101.35] F 10A 14V, 6A, 14VT (circuit G only) .757[19.23] GVRT 20A 6V VRT VRT ACTUATOR ACTUATOR ACTUATOR REMOVAL H REMOVAL 20A 3V REMOVAL 3.99 [101.35] .900 [22.86] .900 [22.86] .900 [22.86] TOOL TOOL TOOL L bracket) 15A 10A 250VAC, (For flush (For125 flush VAC, bracket) (For flush bracket) 1/2 HP 125-250 VAC; 6A 125 VAC L M VRT.4VA/20A 12V (combi-contact) ACTUATOR REMOVAL .900 [22.86] TOOL (combination gold/silver contacts for borderline dry circuit applications) (For flush bracket) 3.99 [101.35] N .4VA/15A 24V (combi-contact) 3.99 [101.35] VRT(combination gold/silver contacts for borderline dry circuit applications) 3.99 [101.35] 62 1.050[26.67] VB1-01 CONTURA X BOOT 2 2.000[50.80] Contura II, III, IV & V Actuator Removal Tool (P/N VRT) TOP TOP TOP INSERT POINTS UNDER INSERT POINTS UNDER INSERT POINTS UNDER ACTUATOR ACTUATOR ACTUATOR HOLD FLUSH ON BRACKET ANDHOLD PUSH FLUSH ON BRACKET AND HOLD PUSH FLUSH ON BRACKET AND PUSH IN IN IN TOP TOP TOP TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN TOP TOP TOP INSERT POINTS UNDER ACTUATOR HOLD FLUSH ON BRACKET AND PUSH IN TOP TOP ACTUATOR REMOVAL TOOL (For flush bracket) VRT ACTUATOR REMOVAL VRT NOTESACTUATOR .900 [22.86] TOOL REMOVAL Consult factory to determine availability for individual circuits and their HP rating. (For flush bracket) .900 [22.86] TOOL flush with bracket) 1. Not (For avaiable Contura 7 or 14 rocker styles. .900 [22.86] INSERT POINTS UNDER TOP ACTUATOR INSERT HOLD POINTSFLUSH UNDER ON BRACKET AND PUSH IN ACTUATOR HOLD FLUSH ON BRACKET AND PUSH TOP IN 2. pole circuits, & are not available with illumination circuits 4, 8, D, J, N, & T or with wire lead or solder lug terminations. Circuits 1, 4, A, D, H, M & E are not available with rating 6 & 8. Rating 7 & 9 only available with circuits 1, 4, A & D. Circuits 2, 3, 5, 7, 8, K, L are 1/2 HP 250VAC only with rating 8. Ratings 6 & 7 must specify lamp code 1 (125VAC neon). Ratings 8 & 9 must specify lamp code 2 (250VAC neon). Rating L available with circuits 1, 4, A & D only. www.carlingtech.com V-Series Contura Sealed Rocker Switches - Accessories Contura Mounting Panels Dimensional Specifications: in. [mm] Contura Hole Plug Dimensional Specifications: in. [mm] 1.450 [36.83] .830 [21.08] TEST CUT HOLE IN ACTUAL MATERIAL VHP CONTURA II,III HOLE PLUG 1.240 [31.50] 1.820 [46.23] .430 [10.92] VHP CONTURA II,III HOLE PLUG VH1 STANDARD HOLE PLUG (No wing serrations) (With VC1 connector attached) 2.000 [50.80] VH2 STANDARD HOLE PLUG (With wing serrations) 1.067 [27.10] 1.928 [48.97] VH3 CONTURA IV HOLE PLUG (No wing serrations) VH4 CONTURA IV HOLE PLUG (With wing serrations) DETAIL VIEW VH1,VH3 & VH5 HOLE PLUGS (No wing serrations for ease of removal) 1.020 [25.91] VH5 CONTURA V HOLE PLUG (No wing serrations) www.carlingtech.com VH6 CONTURA V HOLE PLUG (With wing serrations) DETAIL VIEW VH2,VH4 & VH6 HOLE PLUGS (With wing serrations)