ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 50 to 600V Forward Current 2A Features • Glass passivated superfast recovery Rectifiers • Low leakage current • Moisture sensitivity: level 1, per J-STD-020 • Solder dip 260 °C, 10 s • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 DO-214AA SMB Typical Applications For use of general purpose rectification in lighting, cellular phone, portable device, power supplies and other consumer applications. Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol ES2A ES2B ES2C ES2D ES2F ES2G ES2J Unit Maximum repetitive peak reverse voltage VRRM 50 100 150 200 300 400 600 V Maximum RMS voltage VRMS 35 70 105 140 210 280 420 V Maximum DC blocking voltage VDC 50 100 150 200 300 400 600 Maximum average output rectified current IF(AV) 2.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 50 A It 2 10.0 A2sec TJ, TSTG -55 to +150 °C Rating for fusing(t<8.3ms) Operating junction and storage temperature range Electrical Characteristics Parameter Maximum instantaneous forward voltage Maximum DC reverse current at rated DC blocking voltage Test Conditions IF=2.0A TA=25 (TA = 25 °C unless otherwise noted) Symbol ES2A ES2B VF TA=25 V ES2C ES2D ES2F 0.95 ES2G 1.3 ES2J Unit 1.7 Volts 10.0 IR µA TA=100 100 Maximum reverse recovery IF=0.5A,IR=1.0A, time IRR=0.25A trr Typical junction capacitance CJ 4.0 V, 1 MHz 35 nS 25 20 pF Thermal Characteristics Parameter Typical thermal resistance(1) Symbol ES2A ES2B ES2C ES2D R JA 75 R Jl 25 ES2F ES2G ES2J Unit /W Notes:1. The thermal resistance from junction to ambient,case or mount,mounted on P.C.B with 5×5mm copper pads,2 OZ,FR4 PCB www.goodark.com 1/5 2015.08-Rev.B ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 50 to 600V Forward Current 2A Ratings and Characteristics Curves (TA = 25 unless otherwise noted) www.goodark.com 2/5 2015.08-Rev.B ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 50 to 600V Forward Current 2A Package Outline Dimensions Packing Information 3000 pcs/Reel, 18 Reels/Box; 12mm Tape, 13" Reel Tape & Reel Specification www.goodark.com Symbo SMB(mm) W E F D0 D1 P0 P1 P2 A0 B0 12±0.2 1.75±0.1 5.5±0.05 1.5±0.1 1.50 +0.1/-0 4.0±0.1 8.0±0.1 2.0±0.05 3.95±0.1 5.74±0.1 3/5 2015.08-Rev.B ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 50 to 600V Forward Current 2A Soldering Parameters Reflow Soldering - Temperature Min Pre Heat - Temperature Max - Time (min to max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak TS(max) to TL - Ramp-up Rate - Temperature (TL) Reflow - Time (min to max) (ts) Peak Temperature (TP) Time within 5°C of actual peak Temperature (tp) Ramp-down Rate Time 25°C to peak Temperature (TP) Do not exceed Wave Soldering Peak Temperature : Dipping Time : Soldering : www.goodark.com Sn-Pb Eutectic Assembly 100°C 150°C 60 – 120 secs 3°C/second max 3°C/second max 183°C 60 – 150 seconds 240+0/-5 °C 10 –30 seconds 6°C/second max 6 minutes Max. 260°C Pb-Free assembly 150°C 200°C 60 – 180 secs 3°C/second max 3°C/second max 217°C 60 – 150 seconds 240+0/-5°C 20 – 40 seconds 6°C/second max 8 minutes Max. 260°C 260+0/-5°C 10 seconds 1 time 4/5 2015.08-Rev.B ES2A thru ES2J Surface Mount Glass Passivated Superfast Rectifier Reverse Voltage 50 to 600V Forward Current 2A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’ s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou Good-Ark Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 5/5 2015.08-Rev.B