SGA1J Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 600V Forward Current 1A Features • • • • • • • • Glass passivated Standard Rectifiers Very low profile - typical height of 1.0 mm Low forward voltage drop，Low leakage current ESD capability Moisture sensitivity: level 1, per J-STD-020 AEC-Q101 qualified High temperature soldering guaranteed: 260℃/10 seconds Halogen-free according to IEC 61249-2-21 definition eSGA (SOD-123FL) Typical Applications For use of general purpose rectification,power supplies and other consumer applications,polarity protection,and rail-to tail protection in both consumer and automotive Maximum Ratings (TA = 25 °C unless otherwise noted) Parameter Symbol SGA1J Unit VRRM 600 V VRMS 420 V VDC 600 V Maximum average forward rectified current IF(AV) 1.0 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 25 A TJ, TSTG - 55 to + 150 °C Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Operating junction and storage temperature range Electrical Characteristics Parameter Test Conditions Maximum instantaneous 1A forward voltage Maximum DC reverse current at rated DC blocking voltage (TA = 25 °C unless otherwise noted) Symbol SGA1J Unit VF 1.0 Volts TA=25℃ TA=125℃ 5 IR µA 50 Typical reverse recovery IF=0.5A,IR=1.0A, time Irr=0.25A trr 1.8 uS Typical junction capacitance CJ 6 pF www.goodark.com 4.0 V, 1 MHz 1/4 2015.07-Rev.B SGA1J Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 600V Forward Current 1A Immunity to Electrical Static Discharge to the Following Standards (TA=25℃，unless otherwise noted) Standard JESD22-A114/AEC-Q101-001 Test Type Human body (contact mode) model Test Conditions Symbol Class Value C=100pF,R=1.5KΩ H3A ＞4KV M4 ＞400V VC JESD22-A115/AEC-Q101-002 Machine mode) model(contact C=200pF,R=0Ω Thermal Characteristics(TA=25℃,unless otherwise noted) Parameter Symbol SGA1J RθJA 70 RθJM 15 RθJC 35 Typical thermal resistance Unit ℃/W Note: Thermal resistance from junction to ambient and junction to lead mounted on PCB with 5.0mm*5.0mm copper pad areas. Ratings and Characteristics Curves (TA = 25℃ unless otherwise noted) Figure 2.Maximum Non-Repetitive Peak Forward Surge Current Figure 1.Forward Current Derating Curve Figure 3. Typical Reverse Characteristics www.goodark.com Figure 4. Typical Forward Characteristics 2/4 2015.07-Rev.B SGA1J Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 600V Forward Current 1A Package Outline Dimensions DIM Unit: mm Unit: inch MIN MAX MIN MAX A 0.9 1.08 0.035 0.043 A1 0 0.1 0.000 0.004 B 0.85 1.05 0.033 0.041 C 0.1 0.25 0.004 0.010 D 1.7 2 0.067 0.079 E 2.9 3.1 0.114 0.122 L 0.43 0.83 0.017 0.033 HE 3.5 3.9 0.138 0.154 Soldering footprint Packing Information Packing quantities: 3000 pcs/Reel, 40 Reels/Box; 8mm Tape, 7" Reel Tape & Reel Specification www.goodark.com 3/4 2015.07-Rev.B SGA1J Surface Mount Glass Passivated Standard Rectifier Reverse Voltage 600V Forward Current 1A Disclaimers These materials are intended as a reference to assist our customers in the selection of the Suzhou Good-Ark product best suited to the customer ’s application; they do not convey any license under any intellectual property rights, or any other rights, belonging to Suzhou GoodArk Electronics Co., Ltd.or a third party. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, or infringement of any third-party ’s rights, originating in the use of any product data, diagrams, charts, programs, algorithms, or circuit application examples contained in these materials. All information contained in these materials, including product data, diagrams, charts, programs and algorithms represents information on products at the time of publication of these materials, and are subject to change by Suzhou Good-Ark Electronics Co., Ltd. without notice due to product improvements or other reasons. It is therefore recommended that customers contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized Suzhou Good-Ark Electronics Co., Ltd. for the latest product information before purchasing a product listed herein. The information described here may contain technical inaccuracies or typographical errors. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability, or other loss rising from these inaccuracies or errors. Please also pay attention to information published by Suzhou Good-Ark Electronics Co., Ltd. by various means, including our website home page. (http://www.goodark.com) When using any or all of the information contained in these materials, including product data, diagrams, charts, programs, and algorithms, Please be sure to evaluate all information as a total system before making a final decision on the applicability of the information and products. Suzhou Good-Ark Electronics Co., Ltd. assumes no responsibility for any damage, liability or other loss resulting from the information contained herein. The prior written approval of Suzhou Good-Ark Electronics Co., Ltd. is necessary to reprint or reproduce in whole or in part these materials. Please contact Suzhou Good-Ark Electronics Co., Ltd. or an authorized distributor for further details on these materials or the products contained herein. www.goodark.com 4/4 2015.07-Rev.B