NTE589 Silicon Rectifier General Purpose, Fast Recovery Features: D High Surge Current Capability D High Current Operation D Fast Switching for High Efficiency Maximum Ratings and Electrical Characteristics: (TA = +25°C, Note 1 unless otherwise specified) Maximum Recurrent Peak Reverse Voltage, VRRM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V Maximum RMS Voltage, VRMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 280V Maximum DC Blocking Voltage, VDC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400V Maximum Average Forward Rectified Current (TA = +55°C, .375” lead length), IF(AV) . . . . . . . . . 6A Peak Forward Surge Current, IFSM (8.3ms single half sine–wave superimposed on rated load) . . . . . . . . . . . . . . . . . . . . . . . 300A Maximum Instantaneous Forward Voltage (IF = 6A), VF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.3V Maximum DC Reverse Current (VDC = 400V), IR TA = +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10µA TA = +100°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0mA Maximum Reverse Recovery Time (TJ = +25°C, Note 2), trr . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150ns Typical Junction Capacitance (TJ = +25°C, Note 3), CJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300pF Typical Thermal Resistance, Junction–to–Ambient (Note 4), RthJA . . . . . . . . . . . . . . . . . . . . . 10°C/W Operating Junction Temperature Range, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50° to +125°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . –50° to +150°C Note Note Note Note 1. 2. 3. 4. Resistive or inductive load. For capacitive load, derate current by 20%. Reverse Recovery Test Conditions: IF = 0.5A, IR = 1A, Irr = 0.25A. Measured at 1MHz and applied reverse voltage of 4 volts. Thermal Resistance from Junction to Ambient at .376” (9.5mm) lead lengths, with both leads to heat sink. 1.000 (25.4) Min .360 (9.1) Max .052 (1.3) Dia Max Color Band Denotes Cathode .360 (9.1) Dia Max