V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules FEATURED PRODUCTS Standard Recovery Diode Modules Fast Recovery Diode Modules Schottky Modules Ultrafast Modules Thyristor Modules IGBT Modules RESOURCES • For technical support, contact [email protected] • For further information, visit http://www.vishay.com and click on Modules • Material categorization: For definitions of compliance, please see http://www.vishay.com/doc?99912 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components SELECTOR GUIDE 1/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules TABLE OF CONTENTS Standard Diode Modules.....................................................................................................03 • Standard Recovery Diode Modules - Single ................................................................04 • Standard Recovery Diode Modules - Dual ..................................................................05 • Fast Recovery Diode Modules......................................................................................06 Schottky Diode Modules......................................................................................................07 • Schottky Diode Modules - Single (Not Isolated)...........................................................07 • Schottky Diode Modules - Dual (Not Isolated)..............................................................08 • Schottky Diode Modules - Dual (Isolated)....................................................................10 Ultrafast Recovery Diode Modules......................................................................................12 • Ultrafast Diode Modules - FRED Pt®.............................................................................12 • Ultrafast Diode Modules - HEXFRED®..........................................................................14 Thyristor Modules.................................................................................................................16 • Thyristor Modules - Single............................................................................................16 • Thyristor Modules - Dual...............................................................................................17 Bridge Rectifier Modules......................................................................................................20 IGBT Modules......................................................................................................................23 • Single-Switch IGBT Modules........................................................................................26 • Chopper IGBT Modules................................................................................................27 • Half-Bridge IGBT Modules............................................................................................28 • Full-Bridge IGBT Modules.............................................................................................30 • 4-PAK IGBT Modules....................................................................................................31 • 6-PAK Inverter IGBT Modules.......................................................................................31 • 3-Levels IGBT Modules.................................................................................................32 • Double Interleaved Boost..............................................................................................32 • Dual Forward IGBT Modules.........................................................................................33 • Primary rectifier and PFC Modules...............................................................................33 SELECTOR GUIDE 2/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Standard Diode Modules Versatile and high-efficiency power diode and SCR modules from Vishay Intertechnology feature industry-standard outlines with a choice of diode and thyristor rectifiers. Offering single-rectifying/switch component, half-bridge, and centertapped configurations, these modules are the ideal choice for input rectification applications at either low or high voltages. Vishay modules fulfill a single or composite function within a single package that offers a thermally conductive, but electrically isolated, path to the outside circuit. This electrical isolation between the baseplate and the active semiconductors provides a key advantage over discrete components. The modules are RoHS-compliant and meet industry standards for safety, including UL approval. State-of-the-art compression bonding (for current ratings higher than 250 A) and ultrasonic aluminum wire bonding technologies allow the modules to achieve outstanding performance. Vishay’s high-power modules are recognized throughout the world for their ruggedness, high reliability, and consistency of mechanical specifications and electrical characteristics. Features Options • Wide range of industry-standard package styles • Customizable for specific application needs • Direct mounting on heatsink • Gate and auxiliary cathode accessories available upon request • Choice of rectifier and thyristor technologies • Optimized high-voltage diode and SCR • Fast recovery diode modules available Applications • High isolation voltage (2500 V) • Single- and three-phase input rectification • RoHS-compliant • Industrial welding • Low thermal resistance • Switch mode power supplies • Low- / high-temperature performance (-40 °C to +175 °C) • Motor drives • UL approved • Anti-parallel thyristors (AC switches) • UPS Dimensions in Millimeters 21 26 21 18 12 18 38 40 93 SOT-227 TO-244 (TO-244AB) 27 25 30 92 41 T-Module Add-A-Pak (TO-240AA) 35 50 52 29 94 52 92 SELECTOR GUIDE Magn-A-Pak MAP Power Block 3/34 60 51 52 103 Int-A-Pak Half-Pak (D-67) 21 124 Super Magn-A-Pak VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Power Diode Modules Standard Recovery Diode Modules - Single + - T...HF + - VSKE Device(8) Package Pin Out VRRM Range (V) IF(AV) at TC Max VF at IF (A) (ºC) (V) (A) IFSM (4) (A) VS-T20HF220 T-Module(1) Screwable 2200 20 72 1.3 60 380 VS-T40HF10 to VS-T40HF120 T-Module(1) Screwable 100 to 1200 40 85 1.3 126 570 VS-T70HF10 to VS-T70HF120 T-Module(1) Screwable 100 to 1200 70 85 1.35 220 1200 VS-T85HF10 to VS-T85HF120 T-Module(1) Screwable 100 to 1200 85 85 1.27 267 1700 VS-T110HF10 to VS-T110HF120 T-Module(1) Screwable 100 to 1200 110 85 1.35 345 2000 VS-VSKE56/04 to VS-VSKE56/16 Add-A-Pak(1) (TO-240AA) Screwable 400 to 1600 60 114 1.6 188 1300 VS-VSKE71/04 to VS-VSKE71/16 Add-A-Pak(1) (TO-240AA) Screwable 400 to 1600 80 110 1.6 251 1500 VS-VSKE91/04 to VS-VSKE91/16 Add-A-Pak(1) (TO-240AA) Screwable 400 to 1600 100 112 1.55 314 2000 VS-VSKE166/04PBF to VS-VSKE166/16PBF Int-A-Pak(1) Screwable 400 to 1600 165 100 1.43 518 4000 VS-VSKE196/04PBF to VS-VSKE196/16PBF Int-A-Pak(1) Screwable 400 to 1600 195 100 1.38 612 4750 VS-VSKE236/04PBF to VS-VSKE236/16PBF Int-A-Pak(1) Screwable 400 to 1600 230 100 1.46 722 5500 VS-VSKE250-04PBF to VS-VSKE250-20PBF Magn-A-Pak(1) Screwable 400 to 2000 250 100 1.29 785 7015 VS-VSKE270-04PBF to VS-VSKE270-20PBF Magn-A-Pak(1) Screwable 400 to 2000 270 100 1.48 848 8920 VS-VSKE320-04PBF to VS-VSKE320-20PBF Magn-A-Pak(1) Screwable 400 to 2000 320 100 1.28 1005 10110 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package 3. x = Circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration SELECTOR GUIDE D = Two diodes double circuit C = Two diodes common cathode J = Two diodes common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities 4/34 4. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Power Diode Modules Standard Recovery Diode Modules - Dual + VSMD...C VSMD...A Device(3) - - VSKC... Package ~ + - - VSKD... Pin Out + + VSKJ... VRRM Range (V) IF(AV) at TC Max VF at IF (A) (ºC) (V) (A) IFSM (4) (A) VS-VSKx56/04 to VS-VSKx56/16 Add-A-Pak (TO-240AA)(1) Screwable 400 to 1600 60 114 1.6 188 1300 VS-VSKx71/04 to VS-VSKx71/16 Add-A-Pak (TO-240AA)(1) Screwable 400 to 1600 80 110 1.6 251 1500 VS-VSKx91/04 to VS-VSKx91/16 Add-A-Pak (TO-240AA)(1) Screwable 400 to 1600 100 112 1.55 314 2000 VSMD400AW60 TO-244 (TO-244AB)(2) Screwable 600 200 133 1.31 200 2500 VSMD400CW60 TO-244 (TO-244AB)(2) Screwable 600 200 133 1.31 200 2500 VS-VSKx166/04PBF to VS-VSKx166/16PBF Int-A-Pak(1) Screwable 400 to 1600 165 100 1.43 518 4000 VS-VSKx196/04PBF to VS-VSKx196/16PBF Int-A-Pak(1) Screwable 400 to 1600 195 100 1.38 612 4750 VS-VSKx236/04PBF to VS-VSKx236/16PBF Int-A-Pak(1) Screwable 400 to 1600 230 100 1.46 722 5500 VS-VSKx250-04PBF to VS-VSKx250-20PBF Magn-A-Pak(1) Screwable 400 to 2000 250 100 1.29 785 7015 VS-VSKx270-04PBF to VS-VSKx270-30PBF Magn-A-Pak(1) Screwable 400 to 3000 270 100 1.48 848 8920 VS-VSKx320-04PBF to VS-VSKx320-20PBF Magn-A-Pak(1) Screwable 400 to 2000 320 100 1.28 1005 10 110 VS-VSKD600-04PBF to VS-VSKD600-20PBF Super Magn-A-Pak(1) Screwable 400 to 2000 600 100 1.45 1800 19 000 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package 3. x = Circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration SELECTOR GUIDE D = Two diodes double circuit C = Two diodes common cathode J = Two diodes common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities 5/34 4. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Power Diode Modules Fast Recovery Diode Modules + - T...HFL Device(B) Package Type Pin Out VRRM Range (V) IF(AV) at TC Max VF at IF Typ. trr at 25 ºC (A) (ºC) (V) (A) (ns) Typ. Qrr at 125 ºC setup (IF, diF / dt, VR) (nC) VS-T40HFL20S02 to VS-T40HFL60S02 T-Module(1) Fast Soft Recovery Screwable 200 to 600 40 70 1.60 126 200 126 A, 25 A/µs, 30 V 550 VS-T40HFL20S05 to VS-T40HFL100S05 T-Module(1) Fast Soft Recovery Screwable 200 to 1000 40 70 1.60 126 500 126 A, 25 A/µs, 30 V 2000 VS-T70HFL20S02 to VS-T70HFL60S02 T-Module(1) Fast Soft Recovery Screwable 200 to 600 70 70 1.73 220 200 220 A, 25 A/µs, 30 V 600 VS-T70HFL10S05 to VS-T70HFL100S05 T-Module(1) Fast Soft Recovery Screwable 100 to 1000 70 70 1.73 220 500 220 A, 25 A/µs, 30 V 2100 VS-T85HFL10S02 to VS-T85HFL60S02 T-Module(1) Fast Soft Recovery Screwable 200 to 600 85 70 1.55 267 200 267 A, 25 A/µs, 30 V 800 VS-T85HFL20S05 to VS-T85HFL100S05 T-Module(1) Fast Soft Recovery Screwable 200 to 1000 85 70 1.55 267 500 267 A, 25 A/µs, 30 V 3500 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 6/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Schottky Diode Modules Schottky Diode Modules - Single (Not Isolated) + - ...NQ Device(B) Package Type Pin Out VRRM (V) IF(AV) at TC(3) Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-125NQ015PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 15 120 74 0.43 120 1700 VS-122NQ030PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 30 120 115 0.57 120 2000 VS-120NQ045PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 45 120 105 0.63 120 1550 VS-121NQ045PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 45 120 137 0.65 120 2000 VS-123NQ100PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 100 120 133 0.91 120 1800 VS-182NQ030PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 30 180 108 0.59 180 2500 VS-180NQ045PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 45 180 105 0.60 180 2400 VS-183NQ100PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 100 240 128 0.91 180 2500 VS-245NQ015PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 15 240 73 0.52 240 3000 VS-242NQ030PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 30 240 118 0.54 240 3000 VS-240NQ045PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 45 240 104 0.72 240 3400 VS-241NQ045PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 45 240 144 0.8 240 3450 VS-243NQ100PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 100 240 132 0.95 240 3300 VS-249NQ150PBF Half-Pak (D-67)(2) Single Diode (Cathode to Base) Screwable 150 240 121 1.21 240 2300 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. 10 ms sine pulse, no voltage reapplied 7/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Schottky Diode Modules Schottky Diode Modules - Dual (Not Isolated) ...CNQ Device (B) Package Type Pin Out VRRM (V) IF(AV) at TC(3) Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-220CNQ030PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 30 220 122 0.59 220 1950 VS-200CNQ045PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 45 200 116 0.73 200 1550 VS-201CNQ045PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 45 200 146 0.81 200 2000 VS-203CNQ100PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 100 200 142 1.03 200 1700 VS-209CNQ135PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 135 200 131 1.33 200 1200 VS-209CNQ150PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 150 200 131 1.33 200 1200 VS-300CNQ045PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 45 300 111 0.77 300 2400 VS-301CNQ040PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 40 300 132 0.9 300 3200 VS-301CNQ045PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 45 300 132 0.9 300 3200 VS-303CNQ100PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 100 300 138 1.09 300 2500 VS-401CNQ040PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 40 400 114 0.73 400 3400 VS-400CNQ045PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 45 400 114 0.73 400 3400 VS-401CNQ045PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 45 400 147 0.78 400 3450 VS-403CNQ100PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 100 400 141 1.07 400 3300 VS-409CNQ135PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 135 400 129 1.46 400 2300 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. 10 ms sine pulse, no voltage reapplied 8/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Schottky Diode Modules Schottky Diode Modules - Dual (Not Isolated), continued Device(B) Package Type Pin Out VRRM (V) IF(AV) at TC(3) Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-409CNQ150PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 150 400 129 1.46 400 2300 VS-440CNQ030PBF TO-244 (TO-244AB)(2) Dual Diode (Common Cathode) Screwable 30 440 125 0.63 440 3000 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. 10 ms sine pulse, no voltage reapplied 9/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Schottky Diode Modules Schottky Diode Modules - Dual (Isolated) ~ + - + - + - - VSKD... VSKC... Device (B) + VSKJ... Package Type Pin Out VRRM (V) IF(AV) at TC(3) Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-VSKDS201/045 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 45 200 123 1.04 200 1850 VS-VSKCS201/045 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 45 200 123 1.04 200 1850 VS-VSKDS203/100 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 100 200 121 1.34 200 1700 VS-VSKCS203/100 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 100 200 121 1.34 200 1700 VS-VSKJS203/100 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Anode) Screwable 100 200 121 1.34 200 1700 VS-VSKDS209/150 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 150 200 113 1.35 200 1600 VS-VSKCS209/150 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 150 200 113 1.35 200 1600 VS-VSKJS209/150 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Anode) Screwable 150 200 113 1.35 200 1600 VS-VSKDS220/030 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 30 220 110 0.78 220 2000 VS-VSKCS220/030 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 30 220 110 0.78 220 2000 VS-VSKDS400/045 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 45 400 91 0.92 400 3400 VS-VSKCS400/045 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 45 400 91 0.92 400 3400 VS-VSKDS401/045 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 45 400 120 0.98 400 3450 VS-VSKCS401/045 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 45 400 120 0.98 400 3450 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. 10 ms sine pulse, no voltage reapplied 10/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Schottky Diode Modules Schottky Diode Modules - Dual (Isolated), continued Device(B) Package Type Pin Out VRRM (V) IF(AV) at TC(3) Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-VSKDS408/060 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 60 400 102 1.09 400 3300 VS-VSKCS408/060 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 60 400 102 1.09 400 3300 VS-VSKDS403/100 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 100 400 111 1.3 400 3300 VS-VSKCS403/100 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 100 400 111 1.30 400 3300 VS-VSKDS409/150 Add-A-Pak (TO-240AA)(1) Two Diodes Doubler Circuit Screwable 150 400 105 1.33 400 2300 VS-VSKCS440/030 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Cathode) Screwable 30 440 97 1.00 440 3000 VS-VSKJS440/030 Add-A-Pak (TO-240AA)(1) Dual Diode (Common Anode) Screwable 30 440 97 1.00 440 3000 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. 10 ms sine pulse, no voltage reapplied 11/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Ultrafast Recover y Diode Modules Ultrafast Diode Modules - FRED Pt® UF....FA UF....CB Device (B) Package VSUD....CW Type Pin Out VRRM (V) IF(AV) at Max. VF at Typ. trr at 25 ºC TC(3) IF(4) Typ. Qrr at 125 ºC (A) (ºC) (V) (A) (ns) setup (IF, diF / dt, VR) (nC) VS-UFB80FA20 SOT-227(1) Two Separated Diodes, Parallel Screwable 200 Pin Out 80 129 1.08 30 34 30 A, 200 A/µs, 100 V 184 VS-UFB80FA40 SOT-227(1) Two Separated Diodes, Parallel Screwable 400 Pin Out 80 121 1.39 30 68 30 A, 200 A/µs, 200 V 900 VS-UFB80FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 Pin Out 80 104 1.69 30 79 30 A, 200 A/µs, 200 V 1085 VS-UFL80FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 Pin Out 80 115 1.43 30 115 30 A, 200 A/µs, 200 V 1900 VS-UFB130FA20 SOT-227(1) Two Separated Diodes, Parallel Screwable 200 130 126 1.13 60 Pin Out 42 50 A, 200 A/µs, 100 V 295 VS-UFB130FA40 SOT-227(1) Two Separated Diodes, Parallel Screwable 400 130 114 1.37 60 Pin Out 86 50 A, 200 A/µs, 200 V 1400 VS-UFB130FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 130 92 1.80 60 Pin Out 79 50 A, 200 A/µs, 200 V 1220 VS-UFL130FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 130 98 1.60 60 Pin Out 105 50 A, 200 A/µs, 200 V 1850 VS-UFB170FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 170 76 1.43 100 220 Pin Out 50 A, 500 A/us, 200 V 9100 VS-UFB201FA40 SOT-227(1) Two Separated Diodes, Parallel Screwable 400 200 86 1.28 100 Pin Out 80 50 A, 200 A/µs, 200 V 1300 VS-UFB280FA20 SOT-227(1) Two Separated Diodes, Parallel Screwable 200 280 100 1.10 120 Pin Out 34 150 A, 200 A/µs, 160 V 300 VS-UFB280FA40 SOT-227(1) Two Separated Diodes, Parallel Screwable 400 280 90 1.24 100 Pin Out 93 150 A, 200 A/µs, 200 V 1740 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. Very low thermal resistance 12/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Ultrafast Recover y Diode Modules Ultrafast Diode Modules - FRED Pt®, continued Device Package (B) Type Pin Out VRRM (V) IF(AV) at Max. VF at Typ. trr at 25 ºC TC(3) IF(4) (A) (ºC) (V) (A) (ns) Typ. Qrr at 125 ºC setup (IF, diF / dt, VR) (nC) SOT-227 Two Separated Diodes, Parallel Screwable 400 210 133 1.24 100 Pin Out 93 150 A, 200 A/µs, 200 V 1740 VS-UFB230FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 230 88 1.78 100 Pin Out 83 50 A, 200 A/µs, 200 V 1595 VS-UFL230FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 230 102 1.44 100 104 Pin Out 50 A, 200 A/µs, 200 V 2200 VS-UFB250FA60 SOT-227(1) Two Separated Diodes, Parallel Screwable 600 250 113 1.19 100 166 Pin Out 50 A, 500 A/µs, 200 V 10 000 (150 °C) VS-UFB310CB40 SOT-227 89 50 A, 200 A/us, 200 V 1840 VS-UFL250CB60 Not isolated: two SOT-227(2) separated diodes, Screwable 600 250 119 1.44 100 104 common cathode 50 A, 200 A/us, 200 V 2200 (5) VS-UFB210FA40 (1) (2) Not isolated: two separated Screwable 400 310 119 1.34 100 diodes , common cathode VS-VSUD360CW40 Dual Diode TO-244 Screwable 400 360 116 1.50 360 (TO-244AB)(2) (Common Cathode) 74 180 A, 200 A/µs, 200 V 1295 (150 °C) VS-VSUD400CW60 Dual Diode TO-244 Screwable 600 400 97 2.30 400 (TO-244AB)(2) (Common Cathode) 90 200 A, 200 A/µs, 200 V 4730 5000 VS-VSUD405CW60 TO-244 (2) (TO-244AB) Dual Diode (Common Cathode) Screwable 600 400 132 1.72 400 124 50 A, 500 A/μs, 200 V VS-VSUD410CW60 TO-244 (2) (TO-244AB) Dual Diode (Common Cathode) Screwable 600 400 85 1.37 400 215 50 A, 500 A/μs, 200 V 15 100 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. Very low thermal resistance 13/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Ultrafast Recover y Diode Modules Ultrafast Diode Modules - HEXFRED® ~ + + - - - HFA....FA Device (B) HFA....EA Package Type HFA....NH Pin Out HFA....EA VRRM (V) VSKDU... IF(AV) at Max. VF at Typ. trr at 25 ºC TC(3) IF(4) VSKCU... Typ. Qrr at 125 ºC (A) (ºC) (V) (A) (ns) setup (IF, diF / dt, VR) (nC) VS-HFA70FA120 Two Separated SOT-227(1) Diodes, Parallel Screwable 1200 70 Pin Out VS-HFA70EA120 SOT-227(1) VS-HFA90FA120 Two Separated SOT-227(1) Diodes, Parallel Screwable 1200 90 Pin Out VS-HFA140FA60 Two Separated SOT-227(1) Diodes, Parallel Screwable 600 140 110 2.04 120 90 Pin Out VS-HFA140FA120 Two Separated SOT-227(1) Diodes, Parallel Screwable 1200 140 74 5.03 120 145 50 A, 200 A/µs, 200 V 1920 Pin Out VS-HFA220FA120 Two Separated SOT-227(1) Diodes, Parallel Screwable 1200 220 68 4.70 200 157 50 A, 200 A/µs, 200 V 2850 Pin Out 94 3.80 60 134 50 A, 200 A/µs, 200 V 1770 Two Separated Diodes, Anti- Screwable 1200 70 121 4.00 60 145 50 A, 200 A/µs, 200 V 1920 Parallel Pin Out 63 3.30 40 80 50 A, 200 A/µs, 200 V 740 50 A, 200 A/µs, 200 V 1180 VS-HFA90NH40PBF Half-Pak (D-67)(2) Single Diode Screwable 400 106 100 1.45 90 (Cathode to Base) VS-HFA135NH40PBF Half-Pak (D-67)(2) Single Diode Screwable 400 138 100 1.65 135 77 (Cathode to Base) 135 A, 200 A/µs, 200 V 2800 VS-HFA180NH40PBF Half-Pak (D-67)(2) Single Diode Screwable 400 200 100 1.46 180 90 (Cathode to Base) 135 A, 200 A/µs, 200 V 2650 90 90 A, 200 A/µs, 200 V 1200 VS-HFA140NJ60CPBF Dual Diode TO-244 Screwable 600 168 100 2.10 140 80 (TO-244AB)(2) (Common Cathode) 70 A, 200 A/µs, 200 V VS-HFA210NJ60CPBF Dual Diode TO-244 Screwable 600 240 100 2.25 210 90 (TO-244AB)(2) (Common Cathode) 105 A, 200 A/µs, 200 V 1200 VS-HFA240NJ40CPBF Dual Diode TO-244 Screwable 400 394 100 1.50 240 77 (TO-244AB)(2) (Common Cathode) 140 A, 200 A/µs, 200 V 2300 VS-HFA280NJ60CPBF Dual Diode TO-244 Screwable 600 298 100 2.10 210 92 (TO-244AB)(2) (Common Cathode) 105 A, 200 A/µs, 200 V 1400 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 980 3. Per module 4. Tj = 25 ºC 5. Very low thermal resistance 14/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Ultrafast Recover y Diode Modules Ultrafast Diode Modules - HEXFRED®, continued Device (B) VS-HFA320NJ40CPBF Package Type Pin Out VRRM (V) IF(AV) at Max. VF at Typ. trr at 25 ºC TC(3) IF(4) Typ. Qrr at 125 ºC (A) (ºC) (V) (A) (ns) setup (IF, diF / dt, VR) Dual Diode TO-244 Screwable 400 320 115 1.54 320 90 (TO-244AB)(2) (Common Cathode) (nC) 160 A, 200 A/µs, 200 V 2600 VS-VSKDU162/12PBF Int-A-Pak(1) Two Diodes 2000 Screwable 1200 110 100 3.90 160 150 160 A, 200A/µs, 200 V Doubler Circuit (25°C) VS-VSKCU300/06PBF Int-A-Pak(1) Two Diodes Screwable 600 230 100 1.96 300 130 50 A, 200 A/µs, 400 V 1800 Common Cathode VS-VSKDU300/06PBF Int-A-Pak(1) Two Diodes Screwable 600 230 100 1.96 300 130 50 A, 200 A/µs, 400 V 1800 Doubler Circuit Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package SELECTOR GUIDE 3. Per module 4. Tj = 25 ºC 5. Very low thermal resistance 15/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Thyristor Modules Thyristor Modules - Single (+) (-) VSKS... Device(B) Package Type Pin Out VRRM (V) IF(AV) at TC Max. VF at IF (3) (A) (ºC) (V) (A) IFSM (4) (A) VS-VSKS500/08PbF MAP Power Block(1) Single Thyristor Screwable 800 500 76 1.1 500 16 646 VS-VSKS425/16PbF(5) MAP Power Block(1) Single Thyristor Screwable 1600 425 81 1.27 500 10650 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package 3. Tj = 25 ºC 4. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max 5. Under development SELECTOR GUIDE 16/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Thyristor Modules Thyristor Modules - Dual ~ ~ ~ ~ ~ ~ ~ ~~ ~ ~ ~ -+ - + - - - - + + + + + + + ++ + + + +- + - + + + + - - - - - - - - - - - +- + - + + + + K2 G2 K2 G2 K2 G1 G2 G1G2 K1 G1 K1 G1K1 K1 K2 G1 G1 G2 K1 K1 K2 G1 K1 K2 G1 K1 G1 K2 K1 G2 K2 G1 G2 K1 G1G2K1 K2 G2 VSKT... G1 K1 VSKH... Device(B)(3) G1 K1 G1 K1 K2 G2 VSKL... VSKN... Package G1 K1 K2 G2 G1 K1 K2 G2 VSKU... VSKU... Type Pin Out VRRM (V) IF(AV) at TC Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-VSKx26/04 to VS-VSKx26/16 Add-A-Pak (TO-240AA)(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 27 85 1.65 85 400 VS-VSKx41/04 to VS-VSKx41/16 Add-A-Pak (TO-240AA)(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 45 85 1.81 141 850 VS-VSKx41/04 to VS-VSKx41/16 Add-A-Pak (TO-240AA)(1) Common Anode (Cathode) Screwable 400 to 1600 45 85 1.81 141 850 VS-VSKx56/04 to VS-VSKx56/16 Add-A-Pak (TO-240AA)(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 60 85 1.70 188 1200 VS-VSKx56/04 to VS-VSKx56/16 Add-A-Pak (TO-240AA)(1) Common Anode (Cathode) Screwable 400 to 1600 60 85 1.70 188 1200 VS-VSKx71/04 to VS-VSKx71/16 Add-A-Pak (TO-240AA)(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 75 85 1.72 236 1300 VS-VSKx71/04 to VS-VSKx71/16 Add-A-Pak (TO-240AA)(1) Common Anode (Cathode) Screwable 400 to 1600 75 85 1.72 236 1300 VS-VSKx91/04 to VS-VSKx91/16 Add-A-Pak (TO-240AA)(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 95 85 1.73 298 2000 VS-VSKx91/04 to VS-VSKx91/16 Add-A-Pak (TO-240AA)(1) Common Anode (Cathode) Screwable 400 to 1600 95 85 1.73 298 2000 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package 3. x = circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration. – Thyristor/diode and thyristor/thyristor half-bridge configurations: T = half-bridge fully controlled; h = half-bridge positive controlled; L = half-bridge negative controlled; n = half-bridge, half-controlled common anode – common anode or common cathode configuration: U = Dual ScR common cathode; V = Dual ScR common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities. 4. Tj = 25 ºC 5. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max SELECTOR GUIDE 17/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Thyristor Modules Thyristor Modules - Dual, continued Device(B)(3) Package Type Pin Out VRRM (V) IF(AV) at TC Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-VSKx105/04 to VS-VSKx105/16 Add-A-Pak (TO-240AA)(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 105 85 1.80 330 2000 VS-VSKx105/04 to VS-VSKx105/16 Add-A-Pak (TO-240AA)(1) Common Anode (Cathode) Screwable 400 to 1600 105 85 1.80 330 2000 VS-VSKx136/04PBF to VS-VSKx136/16PBF Int-A-Pak (1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 135 85 1.57 424 3200 Int-A-Pak(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 140 85 1.55 440 4500 VS-VSKx162/04PBF to VS-VSKx162/16PBF Int-A-Pak(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 160 85 1.54 502 4870 VS-VSKx170-04PBF to VS-VSKx170-16PBF Magn-A-Pak (1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 1600 170 85 1.60 534 5100 VS-VSKx230-04PBF to VS-VSKx230-20PBF Magn-A-Pak (1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 2000 230 85 1.59 722 7500 VS-VSKV230-08PBF Magn-A-Pak(1) Common Anode Screwable 800 230 85 1.59 722 7500 VS-VSKx250-04PBF to VS-VSKx250-20PBF Magn-A-Pak Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 400 to 2000 250 85 1.44 785 8500 VS-VSKT320-08PBF to VS-VSKT320-16PBF Magn-A-Pak(1) Thyristor/Thyristor Screwable Half Bridge 800 to 1600 320 70 1.37 1005 9000 VS-VSKx142/04PBF to VS-VSKx142/16PBF (1) Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package 3. x = circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration. – Thyristor/diode and thyristor/thyristor half-bridge configurations: T = half-bridge fully controlled; h = half-bridge positive controlled; L = half-bridge negative controlled; n = half-bridge, half-controlled common anode – common anode or common cathode configuration: U = Dual ScR common cathode; V = Dual ScR common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities. 4. Tj = 25 ºC 5. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max SELECTOR GUIDE 18/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Thyristor Modules Thyristor Modules - Dual, continued Device(B)(3) Package Type Pin Out VRRM (V) IF(AV) at TC Max. VF at IF (4) (A) (ºC) (V) (A) IFSM (5) (A) VS-VSKx430-16PBF to VS-VSKx430-20PBF Super Magn-A-Pak(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 1600 to 2000 430 82 1.65 1350 15 700 VS-VSKx500-08PBF to VS-VSKx500-16PBF Super Magn-A-Pak(1) Thyristor/Diode and Thyristor/ Thyristor HalfBridge Screwable 800 to 1600 500 82 1.50 1570 17 800 VS-VSKT570-16PBF Super Magn-A-Pak(1) Thyristor/ Thyristor HalfBridge Screwable 1600 570 85 1.36 1500 18 800 VS-VSKT570-18PBF Super Magn-A-Pak(1) Thyristor/Thyristor Screwable Half-Bridge 1800 570 74 1.50 1790 17 800 Note: B. Bold indicates new product 1. Isolated package 2. Not isolated package 3. x = circuit configuration. Replace “x” with any of the following letters to determine part number for each circuit configuration. – Thyristor/diode and thyristor/thyristor half-bridge configurations: T = half-bridge fully controlled; h = half-bridge positive controlled; L = half-bridge negative controlled; n = half-bridge, half-controlled common anode – common anode or common cathode configuration: U = Dual ScR common cathode; V = Dual ScR common anode Some configurations might not be available for some packages. Contact Vishay for more information and feasibilities. 4. Tj = 25 ºC 5. t = 10 mS, no voltage reapplied, sinusoidal half-wave, initial Tj = Tj max SELECTOR GUIDE 19/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Bridge Rectifier Modules Versatile and high-efficiency bridge modules from Vishay Intertechnology feature industry-standard outlines with a choice of single-phase and three-phase rectifying bridges. The modules are the ideal choice for input rectification applications at either low or high voltages, with the electrical isolation between the baseplate and the active semiconductors providing a key advantage over discrete components. External electrical connections are provided with a choice of different terminal option, including fast-on, solderable pins, and bolt-down. Vishay high-power bridge modules are RoHS-compliant and meet industry standards for safety, including UL approval. The devices are recognized throughout the world for their ruggedness, high reliability, and consistency of mechanical specifications and electrical characteristics. Features Options • Wide range of package styles and configurations with diode and / or thyristor technologies • Customizable for specific application needs • Temperature sensor available in some package styles • Direct mounting on heatsink • Compact case styles for screw, solderable pin, and fast-on plug terminations Applications • PressFit pins NOW available on MTP package • Single- and three-phase input rectification • High isolation voltage: up to 4000 V • RoHS-compliant • Low thermal resistance • UL approval • High surge current: up to 1880 A Dimensions in Millimeters 30 MTK 30 35 35 15.5 16 MTP (Solderable Pins) 94 32.5 63.5 94 32.5 63.5 16 Pace-Pak 32.5 63.5 32.5 63.5 15.5 MTP (PressFit pins) 17 32.5 63.5 32.5 63.5 SELECTOR GUIDE 17 20/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Bridge Rectifier Modules Bridge Rectifier Modules (2) Device (1) Package V(BR) Range (V) Max. VF at IF (V) (A) 40MT160KPBF MTK (Screwable) Three-Phase Bridge 40 1600 2.0 100 53MT80KPBF to 53MT160KPBF MTK (Screwable) Full-Controlled Three-Phase Bridge 55 800 to 1600 2.68 150 51MT80KPBF to 51MT160KPBF MTK (Screwable) Negative Half-Controlled Three-Phase Bridge 55 800 to 1600 2.68 150 52MT80KPBF to 52MT160KPBF MTK (Screwable) Positive Half-Controlled Three-Phase Bridge 55 800 to 1600 2.68 150 60MT80KPBF to 60MT160KPBF MTK (Screwable) Three-Phase Bridge 60 800 to 1600 1.75 100 70MT80KPBF to 70MT160KPBF MTK (Screwable) Three-Phase Bridge 70 800 to 1600 1.6 100 93MT80KPBF to 93MT160KPBF MTK (Screwable) Full-Controlled Three-Phase Bridge 90 800 to 1600 1.65 150 113MT80KPBF to 113MT160KPBF MTK (Screwable) Full-Controlled Three-Phase Bridge 90 800 to 1600 1.57 150 91MT80KPBF to 91MT160KPBF MTK (Screwable) Negative Half-Controlled Three-Phase Bridge 90 800 to 1600 1.65 150 111MT80KPBF to 111MT160KPBF MTK (Screwable) Negative Half-Controlled Three-Phase Bridge 90 800 to 1600 1.57 150 92MT80KPBF to 92MT160KPBF MTK (Screwable) Positive Half-Controlled Three-Phase Bridge 90 800 to 1600 1.65 150 112MT80KPBF to 112MT160KPBF MTK (Screwable) Positive Half-Controlled Three-Phase Bridge 90 800 to 1600 1.57 150 90MT80KPBF to 90MT160KPBF MTK (Screwable) Three-Phase Bridge 90 800 to 1600 1.6 150 104MT80KPBF to 104MT160KPBF MTK (Screwable) Three-Phase AC Switch 100 800 to 1600 1.53 150 110MT80KPBF to 110MT160KPBF MTK (Screwable) Three-Phase Bridge 110 800 to 1600 1.4 150 130MT80KPBF to 130MT160KPBF MTK (Screwable) Three-Phase Bridge 130 800 to 1600 1.63 200 160MT80KPBF to 160MT160KPBF MTK (Screwable) Three-Phase Bridge 160 800 to 1600 1.49 200 Note: 1. Bold indicates new product 2. VF limits are per diode 3. Voltage suppressor available (identified by suffix “K”) SELECTOR GUIDE Type IF(AV) (A) 4. With both voltage suppression and freewheeling diode available (idenitied by suffix “KW”) 21/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules Bridge Rectifier Modules Bridge Rectifier Modules, continued (2) Device(1) Package Type IF(AV) (A) V(BR) Range (V) Max. VF at IF (V) (A) 200MT40KPBF MTK (Screwable) Three-Phase Bridge 200 400 1.4 200 40MT160PBPBF and 40MT160PAPBF MTP Solderable Pins Three-Phase Bridge 45 1600 1.45 40 70MT160PBPBF and 70MT160PAPBF MTP Solderable Pins Three-Phase Bridge 75 1600 1.45 70 100MT160PBPBF and 100MT160PAPBF MTP Solderable Pins Three-Phase Bridge 75 1600 1.51 100 VS-40MT160P-P MTP (PressFit pins) Three-Phase Bridge 45 1600 1.45 40 VS-70MT160P-P MTP (PressFit pins) Three-Phase Bridge 75 1600 1.45 70 VS-100MT160P-P MTP (PressFit pins) Three-Phase Bridge 100 1600 1.51 100 P101 to P105(3)(4) PACE-PAK (D-19) Single-Phase Semi-Controlled Bridge Common Cathode 25 400 to 1200 1.35 79 P131 to P135 PACE-PAK (D-19) Single-Phase Fully-Controlled Bridge 25 400 to 1200 1.35 79 P121 to P125 PACE-PAK (D-19) Single-Phase Semi-Controlled Bridge Doubler 25 400 to 1200 1.35 79 P431 to P435 PACE-PAK (D-19) Single-Phase Fully-Controlled Bridge 40 400 to 1200 1.4 126 P421 to P425 PACE-PAK (D-19) Single-Phase Semi-Controlled Bridge Doubler 40 400 to 1200 1.4 126 P401 to P405(3)(4) PACE-PAK (D-19) Single-Phase Semi-Controlled Bridge Common Cathode 40 400 to 1200 1.4 126 Note: 1. Bold indicates new product 2. VF limits are per diode 3. Voltage suppressor available (identified by suffix “K”) SELECTOR GUIDE 4. With both voltage suppression and freewheeling diode available (idenitied by suffix “KW”) 22/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules High-efficiency IGBT modules from Vishay Intertechnology feature industry-standard outlines with a choice of PT, NPT, and Trench IGBT technologies. Configured as single switches, inverters, choppers, half-bridges, or in custom configurations, these modules are the ideal choice for high-frequency power applications that demand high-efficiency performance. They are designed for use as a main switching device in switch mode power supplies, uninterruptible power supplies, industrial welding, motor drives, and power factor correction systems. Typical applications include boost and buck converters, forward and double forward converters, half bridges, full bridges (H-bridge), and three-phase bridges. Low thermal resistance allows Vishay IGBT modules to operate at higher case temperatures while maintaining the operating junction temperature within safe limits. Electrically isolated from the circuit, the base plate is exposed, allowing for direct mounting to the heat sink. With improved current sharing and lower operating junction temperatures, designers can now achieve higher system reliability. Vishay IGBT modules are RoHS-compliant and meet industry standards for safety including UL approval. Features Options • Wide range of industry-standard package styles • Short-circuit capability available on many configurations • Direct mount on heat sink • Choice of PT, NPT, and Trench IGBT technologies • Optional SMD integrated thermistor • Low-VCE(on) IGBT • Customizable for specific application needs • Switching frequency from 1 kHz to 150 kHz • Automotive products upon request • Optimized anti-parallel ultrafast diode with soft recovery characteristics Applications • Rugged transient performance • Industrial high-frequency welding • High isolation voltage up to 3500 V • Switch mode power supplies • 100 % lead (Pb)-free and RoHS-compliant • Uninterruptible power supplies • Low thermal resistance • Motor drives • Wide operating temperature range (-40 °C to +175 °C) • Power factor correction • UL-approved • Solar inverters • PressFit pins technology now available on selected packages • Gradually introducing modules using proprietary Vishay 600 V and 650 V IGBT silicon (Trench PT and Trench Field-Stop technologies) Dimensions in Millimeters SIP SOP-227 MTP 26 62 63 38 35 Int-A-Pak (New) EMIPAK-1B 34 94 62 SELECTOR GUIDE Dual Int-A-Pak Low Profile EMIPAK-2B 63 57 63 Econo2 62 X-MAP 62 17 106 27 12 94 Dual Int-A-Pak 62 12 30 29 30 58 17 16 12 8 Int-A-Pak EMIPAK2 32 22 45 17 17 108 108 23/34 152 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Product Package Model Max Dimensions L x W x H (mm) Pin-Out SIP 62 x 22 x 8 Solderable Pins Frequency Circuit configuration Voltage Range Current Ratings Speed Grade Available (V) at 25 ºC (A) (kHz) 6PAK Inverter Customized Configuration 600 8 to 30 1 to 60 600 to 1200 50 to 200 DC to 150 600 to 1200 up to 100 up to 60 600 up to 60 up to 150 600-1200 up to 55 up to 80 600-1200 up to 160 up to 80 600 to 1200 100 to 20 DC to 60 600 to 1200 up to 100 up to 60 600 to 1200 up to 100 uo tp 60 Single Switch SOT-227 38 x 26 x 12 Screwable Chopper Customized Configuration Half Bridge Full Bridge MTP 63 x 32 x 16 Screwable (PressFit Coming Soon) Dual Forward Primary Rectifier and PFC Customized Configuration Dual Mode PFC EMIPAK2 62 x 58 x 17 Solderable Three Levels Half Bridge Inverter Customized Configuration EMIPAK-1B 63 x 34 x 12 PressFit Neutral Point Clamp Topology Customized Configurations Double Interleaved Boost Converter EMIPAK-2B 63 x 57 x 12 PressFit 3-Levels Half-Bridge Inverter Customized Configurations Half Bridge IAP (Int-A-Pak) 94 x 35 x 29 Screwable Single Switch Customized Configuration Single Switch IAP (Int-A-Pak) New Half Bridge 94x34x30 Screwable Chooper Customized Configuration ECONO2 SELECTOR GUIDE 108 x 45 x 17 Screwable (PressFit Coming Soon) 4PAK Customized Configuration 24/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Product Package Model Max Dimensions L x W x H (mm) Pin-Out DIAP (Dual Int-A-Pak) 106 x 62 x 30 Screwable DIAP LP (Dual Int-A-Pak Low Profile) 108 x 62 x 17 Screwable X-MAP 152 x 62 x 17 Screwable / Solderable Frequency Circuit configuration Voltage Range Current Ratings Speed Grade Available (V) at 25 ºC (A) (kHz) Single Switch Half Bridge up to 60 600 to 1200 up to 100 Chopper Customized Configuration Half Bridge Three Levels Inverter Customized Configuration 600 up to 750 up to 30 1200 up to 620 4 to 30 Half Bridge SELECTOR GUIDE Customized Configuration 25/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Single-Switch IGBT Modules Single-Switch No Diode Device(B) Single-Switch with Diode Package Circuit Pin Out VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) VS-GB90DA120U SOT-227 Single-Switch with Diode Screwable 1200 149 90 90 3.30 5.8 8 to 60 VS-GB90SA120U SOT-227 Single-Switch No Diode Screwable 1200 149 90 90 3.30 5.8 8 to 60 VS-GB90DA60U SOT-227 Single-Switch with Diode Screwable 600 147 90 90 2.40 1.76 up to 150 VS-GT140DA60U SOT-227 Single-Switch with Diode Screwable 600 200 140 90 1.70 2.55 4 to 30 VS-GT175DA120U SOT-227 Single-Switch with Diode Screwable 1200 288 175 90 1.73 15.7 4 to 30 VS-GA200SA60UP SOT-227 Single-Switch No Diode Screwable 600 200 100 100 1.60 6.5 up to 40 VS-GP250SA60S SOT-227 Single-Switch No Diode Screwable 600 370 245 90 1.01 17.7 up to 5 VS-GA250SA60S SOT-227 Single-Switch No Diode Screwable 600 400 250 90 1.33 43.7 up to 5 VS-GB300AH120N Dual Int-A-Pak Single-Switch with Diode Screwable 1200 620 300 80 1.90 58.0 8 to 60 VS-GB400AH120N Dual Int-A-Pak Single-Switch with Diode Screwable 1200 650 400 80 1.90 81.0 8 to 60 VS-GB600AH120N Dual Int-A-Pak Single Switch with Diode Screwable 1200 910 600 80 1.90 105.0 8 to 60 (1) Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 26/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Chopper IGBT Modules Chopper High-Side Switch (with A/P Diode) Device (B) Chopper Low-Side Switch (with A/P Diode) Package Circuit Pin Out Chopper High-Side Switch (No A/P Diode – SOT-227) VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) Chopper Low-Side Switch (No A/P Diode – SOT-227) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) VS-GB50LA120UX SOT-227 Chopper Low-Side Switch Screwable 1200 84 57 80 3.22 6.3 8 to 60 VS-GB50NA120UX SOT-227 Chopper High-Side Switch Screwable 1200 84 57 80 3.22 6.3 8 to 60 VS-GB70LA60UF SOT-227 Chopper Low-Side Switch Screwable 600 111 76 80 2.23 2.6 up to 150 VS-GB70NA60UF SOT-227 Chopper High-Side Switch Screwable 600 111 76 80 2.40 2.6 up to 150 VS-GT100LA120UX SOT-227 Chopper Low-Side Switch Screwable 1200 134 92 80 2.36 31.2 4 to 30 VS-GT100NA120UX SOT-227 Chopper High-Side Switch Screwable 1200 134 92 80 2.36 31.2 4 to 30 VS-GB50LP120N Int-A-Pak (New) Chopper Low Side Switch Screwable 1200 100 50 80 1.70 8.8 8 to 60 VS-GB100LP120N Int-A-Pak (New) Chopper Low Side Switch Screwable 1200 200 100 80 1.80 18.5 8 to 60 VS-GB100LH120N Dual Int-A-Pak Chopper Low Side Switch Screwable 1200 200 100 80 1.77 14.2 8 to 60 VS-GB100NH120N Dual Int-A-Pak Chopper High Side Switch Screwable 1200 200 100 80 1.90 18.4 8 to 60 VS-GB150LH120N Dual Int-A-Pak Chopper Low Side Switch Screwable 1200 300 150 80 1.87 32.0 8 to 60 VS-GB200LH120N Dual Int-A-Pak Chopper Low Side Switch Screwable 1200 370 200 80 2.07 39.0 8 to 60 VS-GB200NH120N Dual Int-A-Pak Chopper High Side Switch Screwable 1200 420 200 80 1.80 39.0 8 to 60 VS-GB300LH120N Dual Int-A-Pak Chopper Low Side Switch Screwable 1200 500 300 80 2.00 67.4 8 to 60 VS-GB300NH120N Dual Int-A-Pak Chopper High Side Switch Screwable 1200 500 300 80 2.00 67.4 8 to 60 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 27/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Half-Bridge IGBT Modules Half-Bridge Half-Bridge with Thermistor Device (B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) (A) VCE(on) at Etot at Speed Tj = 25 ºC Tj = 125 ºC (kHz) typ. (mJ) (ºC) (V) IC at TC VS-40MT120UHAPBF MTP Half-Bridge Solderable 1200 80 40 104 3.36 3.2 8 to 60 VS-40MT120UHTAPBF MTP Half-Bridge with Thermistor Solderable 1200 80 40 104 3.36 3.2 8 to 60 VS-50MT060WHTAPBF MTP Half-Bridge with Thermistor Solderable 600 114 50 109 2.30 2.4 60 to 100 VS-70MT060WHTAPBF MTP Half-Bridge with Thermistor Solderable 600 100 70 78 2.10 2.4 60 to 150 Half-Bridge Screwable 600 350 240 60 1.37 17.7 DC to 1 VS-GP100TS60SFPBF Int-A-Pak VS-GA100TS60SFPBF Int-A-Pak Half-Bridge Screwable 600 220 100 130 1.11 41.0 DC to 1 VS-GB100TS60NPBF Int-A-Pak Half-Bridge Screwable 600 108 74 80 2.60 2.1 8 to 60 VS-GB150TS60NPBF Int-A-Pak Half-Bridge with Screwable SMD Gate Resistor 600 138 93 80 2.64 6.6 8 to 60 VS-GB200TS60NPBF Int-A-Pak Half-Bridge with Screwable SMD Gate Resistor 600 209 142 80 2.60 11.6 8 to 60 VS-GT50TP60N Int-A-Pak (New) Half-Bridge Screwable 600 85 50 80 1.65 1.4 4 to 30 VS-GB50TP120N Int-A-Pak (New) Half Bridge Screwable 1200 100 50 80 1.75 12.5 8 to 60 VS-GT50TP120N Int-A-Pak (New) Half Bridge Screwable 1200 100 50 80 1.90 9.9 4 to 30 VS-GB75TP120N Int-A-Pak (New) Half-Bridge Screwable 1200 150 75 80 1.80 16.8 8 to 60 VS-GB75TP120U Int-A-Pak (New) Half Bridge Screwable 1200 105 75 80 3.20 10.0 8 to 60 VS-GT100TP60N Int-A-Pak (New) Half-Bridge Screwable 600 160 100 80 1.65 2.5 4 to 30 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 28/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Half Bridge IGBT Modules, continued Device (B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) (A) VCE(on) at Etot at Speed Tj = 25 ºC Tj = 125 ºC (kHz) typ. (mJ) (ºC) (V) IC at TC VS-GB100TP120N Int-A-Pak (New) Half Bridge Screwable 1200 200 100 80 1.80 18.4 8 to 60 VS-GB100TP120U Int-A-Pak (New) Half Bridge Screwable 1200 150 100 80 3.45 12.7 8 to 60 VS-GB100TH120U Dual Int-A-Pak Half-Bridge Screwable 1200 200 100 80 3.46 14.0 8 to 60 VS-GB100TH120N Dual Int-A-Pak Half-Bridge Screwable 1200 200 100 80 1.80 14.2 8 to 60 VS-GB150TH120N Dual Int-A-Pak Half-Bridge Screwable 1200 225 150 80 1.70 37.0 8 to 60 VS-GT150TH120N Dual Int-A-Pak Half-Bridge Screwable 1200 300 150 80 1.70 33.0 4 to 30 VS-GB150TH120U Dual Int-A-Pak Half Bridge Screwable 1200 280 150 80 3.1 28.5 8 to 60 VS-GA200TH60S Dual Int-A-Pak Half-Bridge Screwable 600 260 200 80 1.90 16.4 DC to 1 VS-GB200TH120N Dual Int-A-Pak Half-Bridge Screwable 1200 360 200 80 1.90 38.2 8 to 60 VS-GB200TH120U Dual Int-A-Pak Half-Bridge Screwable 1200 330 200 80 3.10 38.2 8 to 60 VS-GB300TH120N Dual Int-A-Pak Half-Bridge Screwable 1200 500 300 80 2.00 67.4 8 to 60 VS-GB300TH120U Dual Int-A-Pak Half-Bridge Screwable 1200 530 300 80 3.10 53.3 8 to 60 VS-GT400TH60N Dual Int-A-Pak Half-Bridge Screwable 600 530 400 80 1.60 40.0 4 to 30 VS-GT400TH120N Dual Int-A-Pak Half-Bridge Screwable 1200 600 400 80 1.70 86.0 4 to 30 VS-GB400TH120U Dual Int-A-Pak Half Bridge Screwable 1200 660 400 80 3.1 63.3 8 to 60 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 29/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Half-Bridge IGBT Modules, continued Device (B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) (A) VCE(on) at Etot at Speed Tj = 25 ºC Tj = 125 ºC (kHz) typ. (mJ) (ºC) (V) IC at TC VS-GA300TD60S Dual Int-A-Pak Low-Profile Half-Bridge Screwable 600 530 376 80 1.24 156.0 DC to 1 VS-GP300TD60S Dual Int-A-Pak Low-Profile Half-Bridge Screwable 600 610 390 80 1.26 63 DC to 1 VS-GA400TD60S Dual Int-A-Pak Low-Profile Half-Bridge Screwable 600 750 525 80 1.24 184.0 DC to 1 VS-GP400TD60S Dual Int-A-Pak Low-Profile Half-Bridge Screwable 600 835 570 80 1.26 81 DC to 1 Full-Bridge IGBT Modules Full-Bridge Device (B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) VS-20MT120UFAPbF MTP Full-Bridge Solderable 1200 40 20 96 3.29 1.5 8 to 60 VS-20MT120UFP MTP Full-Bridge Solderable 1200 40 20 106 3.29 2.1 8 to 60 VS-25MT060WFAPbF MTP Full-Bridge Solderable 69 46 80 2.22 0.9 8 to 60 600 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 30/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules 4-PAK IGBT Modules 4-Pak (Thermistor Option Available) Device (B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) VS-GB50YF120N ECONO2 4-Pak Solderable 1200 66 44 80 3.49 3.5 8 to 60 VS-GB75YF120N ECONO2 4-Pak Solderable 1200 100 67 80 3.40 7.6 8 to 60 VS-GB75YF120UT ECONO2 4-Pak with Thermistor Solderable 1200 100 67 80 3.40 4.8 8 to 60 6-PAK IGBT Modules Three-Phase Inverter Device(B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) VS-CPV362M4FPbF SIP Three-Phase Inverter Solderable 600 8.8 4.8 100 1.41 0.9 1 to 10 VS-CPV362M4UPbF SIP Three-Phase Inverter Solderable 600 7.2 3.9 100 1.70 0.4 Over 5 VS-CPV363M4UPbF SIP Three-Phase Inverter Solderable 600 13 6.8 100 1.70 0.5 1 to 10 VS-CPV364M4FPbF SIP Three-Phase Inverter Solderable 600 27 15 100 1.35 2.5 1 to 10 VSCPV364M4KPbF SIP Three-Phase Inverter Solderable 600 24 13 100 1.80 1.3 Over 5 VS-CPV364M4UPbF SIP Three-Phase Inverter Solderable 600 20 10 100 1.56 0.7 Over 5 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 31/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules 3-Levels IGBT Modules Three-Levels Half-Bridge Inverter Stage Device (B) Neutral Point Clamp Topology (T-NPC) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) Neutral Point Clamp Topology PressFit 600 to 1200 64 42 80 1.42 0.61 up to 20 EMIPAK-2B Three Levels Half-Bridge Inverter Stage PressFit 600 154 113 80 1.45 2.8 up to 20 VS-ETF150Y65U EMIPAK-2B Three Levels Half-Bridge Inverter Stage PressFit 650 180 150 60 2.04 2.10 up to 20 VS-EMF050J60U EMIPAK2 Three Levels Half-Bridge Inverter Stage Solderable 600 / 900 1.8 / 2.7 1.1 6 to 150 VS-GT300FD060N DIAP Low-Profile Three Levels Half-Bridge Inverter Stage Screwable 600 1.72 27.6 4 to 30 VS-ENQ030L120S EMIPAK-1B VS-ETF075Y60U 88 / 85 60 / 57 80 396 300 80 Double Interleaved Boost Double Interleaved Boost Converter Device (B) VS-ETL015Y120H Package EMIPAK-2B Circuit Double Interleaved Boost Converter Pin Out PressFit VCES (V) IC at 25 ºC (A) 1200 22 IC at TC (A) (ºC) 15 80 VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) 2.61 1.89 Speed (kHz) up to 20 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 32/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules IGBT Modules Dual Forward IGBT Modules Dual Forward Device(B) Package VCES (V) IC at 25 ºC (A) 600 Solderable 600 Circuit VS-100MT060WDF MTP Dual Forward VS-150MT060WDF MTP Dual Forward Pin Out Solderable IC at TC VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) (A) (ºC) 121 83 80 1.93 2.6 6 to 150 138 96 80 2.11 3.4 70 kHz to 200 kHz Primary Rectifier and PFC IGBT Modules Single Phase Bridge Plus PFC Primary Rectifier and PFC Device (B) Package Circuit Pin Out VCES (V) IC at 25 ºC (A) IC at TC (A) (ºC) VCE(on) at Etot at Tj = 25 ºC Tj = 125 ºC typ. (mJ) (V) Speed (kHz) VS-70MT060WSP MTP Primary Rectifier Solderable 600 and PFC 96 66 80 1.93 0.57 up to 150 VS-100MT060WSP MTP Primary Rectifier Solderable 600 and PFC 107 73 80 2.14 1.95 up to 150 Note: B. Bold indicates new product 1. Under development Contact Vishay for customization of circuit topology, IGBT speed, etc. for any listed package SELECTOR GUIDE 33/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Power Modules WORLDWIDE SALES CONTACTS THE AMERICAS EUROPE UNITED STATES GERMANY VISHAY AMERICAS ONE GREENWICH PLACE SHELTON, CT 06484 UNITED STATES PH: +1-402-563-6866 FAX: +1-402-563-6296 VISHAY ELECTRONIC GMBH DR.-FELIX-ZANDMAN-PLATZ 1 95100 SELB GERMANY PH: +49-9287-71-0 FAX: +49-9287-70435 ASIA FRANCE SINGAPORE VISHAY INTERTECHNOLOGY ASIA PTE LTD. 37A TAMPINES STREET 92 #07-00 SINGAPORE 528886 PH: +65-6788-6668 FAX: +65-6788-0988 VISHAY S.A. 199, BD DE LA MADELEINE 06003 NICE, CEDEX 1 FRANCE PH: +33-4-9337-2727 FAX: +33-4-9337-2726 P.R. CHINA UNITED KINGDOM VISHAY CHINA CO., LTD. 15D, SUN TONG INFOPORT PLAZA 55 HUAI HAI WEST ROAD SHANGHAI 200030 P.R. CHINA PH: +86-21-22315555 FAX: +86-21-22315551 VISHAY LTD. SUITE 7A, TOWER HOUSE ST. CATHERINE’S COURT SUNDERLAND ENTERPRISE PARK SUNDERLAND SR5 3XJ UNITED KINGDOM PH: +44-191-516-8584 FAX: +44-191-549-9556 JAPAN VISHAY JAPAN CO., LTD. SHIBUYA PRESTIGE BLDG. 4F 3-12-22, SHIBUYA SHIBUYA-KU TOKYO 150-0002 JAPAN PH: +81-3-5466-7150 FAX: +81-3-5466-7160 SELECTOR GUIDE 34/34 VMN-SG2183-1411 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000