UNISONIC TECHNOLOGIES CO., LTD UOT406 Preliminary TRIAC FOUR-QUADRANT TRIAC, ENHANCED NOISE IMMUNITY DESCRIPTION The UTC UOT406 is a Four-quadrant triac, it uses UTC’s advanced technology to provide customers with direct interfacing to low power gate drive circuits and sensitive gate, etc. The UTC UOT406 is suitable for Low power AC fan speed controllers, Low power motor control and Home appliances, etc. 1 SOT-223 FEATURES * VDRM≤600V, IGT≤3mA, IGT≤5mA (T2-G+) ITSM≤12.5A (t=20ms), ITSM≤13.8A (t=16.7ms), IT(RMS) ≤1A * Direct interfacing to low power gate drive circuits * Sensitive gate SYMBOL ORDERING INFORMATION Ordering Number UOT406G-x-AA3-R Note: Pin Assignment: MT1: MT1 MT2: MT2 UOT406G-AA3-R Package SOT-223 Pin Assignment 1 2 3 MT1 MT2 G Packing Tape Reel G: Gate (1)Packing Type (1) R: Tape Reel (2)Package Type (2) AA3: SOT-223 (3)Green Package (3) G: Halogen Free and Lead Free MARKING www.unisonic.com.tw Copyright © 2013 Unisonic Technologies Co., Ltd 1 of 3 VER.a UOT406 Preliminary TRIAC ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL RATINGS UNIT Repetitive Peak Off-State Voltage VDRM 600 V Repetitive Peak Reverse Voltage VRRM 600 V RMS On-State Current full sine wave, Tsp≤103°C IT(RMS) 1 A full sine wave, t=20ms 12.5 A Non-Repetitive Peak On-State TJ≤25°C prior to ITSM Current t=16.7ms 13.8 A surge 2 2 I t for Fusing tp=10ms It 1.28 A2 s 50 A/µs T2+G+ 50 A/µs ITM=1A, IG=20mA, T2+GRate of Rise of On-State Current dIT/dt dIG/dt=0.2A/µs T2-G50 A/µs T2-G+ 10 A/µs Peak Gate Current IGM 1 A Peak Gate Power PGM 2 W Average Gate Power Over any 20ms period PG(AV) 0.1 W Storage Temperature TSTG -40 ~ +150 °C Junction Temperature TJ 125 °C Note: Absolute maximum ratings are those values beyond which the device could be permanently damaged. Absolute maximum ratings are stress ratings only and functional device operation is not implied. THERMAL RESISTANCES PARAMETER SYMBOL θJC Junction to Case Junction to Ambient For minimum footprint For pad area MIN θJA TYP MAX 15 UNIT K/W K/W K/W 156 70 ELECTRICAL CHARACTERISTICS (TJ=25°C, unless otherwise specified) PARAMETER SYMBOL Gate Trigger Current IGT Gate Trigger Voltage VGT Holding Current IH Latching Current IL On-State Voltage Off-State Current VT ID Rate of Rise of Off-State Voltage Rate of Change of Commutating Voltage dVD/dt dVcom/dt TEST CONDITIONS T2+G+ T2+GVD=12V, IT=0.1A T2-GT2-G+ VD=12V, IT=0.1A VD=VDRM, IT=0.1A, TJ=125°C VD=12V, IG=0.1A T2+G+ T2+GVD=12V, IG=0.1A T2-GT2-G+ IT=1A VD=VDRM(max), TJ=125°C VDM=0.67VDRM(max), TJ=110°C, exponential waveform, gate open circuit VDM=400V, TJ=110°C, ITM=1A, dIcom/dt= 0.44A/ms UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw MIN TYP MAX 3 3 3 5 1.3 0.2 1.3 7 7 20 7 7 1.6 0.5 UNIT mA mA mA mA V V mA mA mA mA mA V mA 10 V/µs 0.5 V/µs 2 of 3 VER.a UOT406 Preliminary TRIAC UTC assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all UTC products described or contained herein. UTC products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. UNISONIC TECHNOLOGIES CO., LTD www.unisonic.com.tw 3 of 3 VER.a