CPCI Series / DPCI Series 200 Watts CompactPCI® System Power Supplies CPCI SERIES 200 Watts, Ac Input with PFC DPCI SERIES 200 Watts, 48 Vdc Input FEATURES: INPUT FAULT CPCI200 EXECUTIVE MEMBER • 200 W in 3U x 8HP, • Fully compliant with PICMG CompactPCI® specifications • Current sharing and internal OR-ing diodes for N+1 redundancy • High current 5 V and 3.3 V outputs • CompactPCI® package requires only 15 cfm of external cooling air • Universal ac input versions with power factor correction • 48 Vdc input versions 3U x 8 HP CPQ400 (shown with optional interface board) The CPCI series (ac input) and DPCI series (dc input) are highly reliable power supplies for CompactPCI systems, which are increasingly used in communications, industrial, military/aerospace, and other applications. These power supplies offer high power density in plug-in modules that meet the requirements of the PICMG® power interface specification for CompactPCI systems. These units may be used as a single power supply for a CompactPCI system, or multiple units may be used in parallel for higher power capability as needed. In addition, all units include current sharing, internal OR-ing diodes, and a hot plug input/output connector to offer full hot swap capability and N+1 redundancy. Also, compatible ac and dc input units offer standardization on a single power supply series for a system mechanical configuration. The CPQ400 is a power supply assembly that is made up of two CPCI/DCPI 204s. Two supplies are enclosed with a fan to provide an alternative mounting configuration to the Compact PCI format. This is used for maximizing the number of a customers revenue slots by relocating the power supply while still keeping the CPCI/DCPI electrical characteristics. These supplies can be used in parallel to provide 400 watts of output power or as a 200 watt N +1 redundant power supply system. An optional interface board brings the input and output connectors to convenient screw terminals and Molex type connectors. The individual model ratings depend on the specific units chosen and you should refer to the standard CPCI/DCPI data sheets. When used as a single 400 watt unit, you can simply double the single unit specifications. AC INPUT Model Power Connector Output 1 Output 2 CPCI-204-1203 200 W 47 Pin 5.0 V @ 25 A 3.3 V @ 30A CPCI-204-1203 M 200 W DIN "M' 5.0 V @ 25 A 3.3 V @ 25 A CPCI SERIES SPECIFICATIONS AC INPUT: 90-264 Vac continuous range, 47 to 63 Hz. POWER FACTOR: 0.99 typical at full load. Meets EN61000-3-2 Class A. INRUSH: CPCI : Cold start ac current is less than 27 A at 115 Vac, and 50 A at 230 Vac. Limited by thermistor. BROWNOUT PROTECTION: Holds regulation to 85 Vac (30 seconds maximum) Output 3 Output 4 Min. Load on V1* Max. Output From V1 & V2 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A HOLDUP TIME: 10 ms minimum after removal of power at full load. EFFICIENCY: 70% typical. EMI: CONDUCTED RFI Meets FCC Part 15, Class A; EN55022 Class A. FAIL# SIGNAL: TTL compatible signal. Signal goes low under the following conditions: Outputs #1 or #2 fail; an overcurrent condition on outputs #1, #2, or #3; an overtemperature shutdown; an overvoltage shutdown; or an ac input failure (5 ms warning before outputs shutdown). DC INPUT Model Power Connector Output 2 Output 3 Output 4 Min. Load on V1* Max. Output From V1 & V2 DPCI-204-1203 200 W 47 Pin 5 V @ 25 A 3.3 V @ 30 A 12 V @ 5.5 A -12 V @ 0.5 A 3.0 A 35 A DPCI-204-1203M 200 W DIN "M" 5 V @ 25 A 3.3 V @ 25 A 12 V @ 5.5 A -12 @ 0.5 A 3.0 A 35 A DPCI SERIES SPECIFICATIONS DC INPUT: 36-72 Vdc EFFICIENCY: 75% typical 100 Output 1 FAIL# SIGNAL: TTL compatible signal. Signal goes low under the following conditions: Any of 4 outputs fail; an overtemperature shutdown; or an overvoltage shutdown. Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CPCI Series / DPCI Series 200 Watts CompactPCI® System Power Supplies Power Supply Pin Assignments Model: CPCI-204-1203 Connector: Positronics PCI47M400A1 Mating Connector: PCIH47F300A1 Model: DPCI-204-1203 Connector: Positronics PCI47M400A1 Mating Connector: PCIH47F300A1 Pin No. Designation Pin No. Designation Pin No. Designation Pin No. Designation 1 +5 V 25 Not Used 1 +5 V 25 Not Used 2 +5 V 26 Not Used 2 +5 V 26 Not Used 3 +5 V 27* Enable 3 +5 V 27* Enable 4 +5 V 28 Not Used 4 +5 V 28 Not Used 5 GND 29 Not Used 5 GND 29 Not Used 6 GND 30 +5 V Sense 6 GND 30 +5 V Sense 7 GND 31 Not Used 7 GND 31 Not Used 8 GND 32 Not Used 8 GND 32 Not Used 9 GND 33 +3.3 V Sense 9 GND 33 +3.3 V Sense 10 GND 34 Sense Return 10 GND 34 Sense Return 11 GND 35 Not Used 11 GND 35 Not Used 12 GND 36 +12 V Sense 12 GND 36 +12 V Sense 13 +3.3 V 37 Not Used 13 +3.3 V 37 Not Used 14 +3.3 V 38 DEG# 14 +3.3 V 38 DEG# 15 +3.3 V 39 Inhibit 15 +3.3 V 39 Inhibit 16 +3.3 V 40 Not Used 16 +3.3 V 40 Not Used 17 +3.3 V 41 Not Used 17 +3.3 V 41 Not Used 18 +3.3 V 42 Fail # 18 +3.3 V 42 Fail # 19 GND 43 Not Used 19 GND 43 Not Used 20 +12 V Output 44 Not Used 20 +12 V Output 44 Not Used 21 -12 V Output 45 Safety Ground 21 -12 V Output 45** Safety Ground 22 GND 46 Ac Neutral 22 GND 46 -48 Vdc Input Return 23 Not Used 47 Ac Line 23 Not Used 47 -48 Vdc Input 24 GND 24 GND Model: CPCI-204-1203M Male Connector: DIN 41612 Type “M” Mating Connector: ERNI #914374 or AMP#148370 Pin No. Designation Pin No. A13 Not Used B17 A14 Inhibit B19 Model: DPCI-204-1203M Male Connector: DIN 41612 Type “M” Mating Connector: ERNI #914374 or AMP#148370 Pin No. Designation Pin No. +3.3 V A13 Not Used B17 +3.3 V +12 V Output A14 Inhibit B18 +3.3 V Designation Designation A15 Not Used B19 +12 V Output A15 Not Used B19 +12 V Output A16 Sense Return B20 -12 V Output A16 Sense Return B20 -12 V Output A17 +5 V Sense B22 +5 V A17 +5 V Sense B22 +5 V A1 8 +3.3 V Sense B25 GND A18 +3.3 V Sense B25 GND A1 9 +12 V Output B28 Not Used A19 +12 V Output B28 -48 Vdc Input Return A20 -12 V Output B31 Not Used A20 -12 V Output B31 -48 Vdc Input Enable B2 Ac Line C13 Enable B2 Not Used C13 B5 Ac Neutral C14 Deg# B5 Not Used C14 Deg# B8 Not Used C15 Fail # B8 Not Used C15 Fail # B11 Chassis Ground C16 +3.3 V B11 Chassis Gnd C16 +3.3 V B13 +3.3 V C17 +3.3 V B13 +3.3 V C17 +3.3 V B14 +3.3 V C18 +3.3 V B14 +3.3 V C18 +3.3 V B15 +3.3 V C19 +12 V Output B15 +3.3 V C19 +12 V Output B1 6 +3.3 V C20 -12 V Output B16 +3.3 V C20 -12 V Output Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com 101 CompactPCI® System Power Supplies OUTPUT ENVIRONMENTAL LINE & LOAD REGULATION: ± 2% over input range and minimum to 100% load change. RIPPLE & NOISE 1% p-p or 50 mV, whichever is greater. Measured at mating connector with 20 µF REMOTE SENSE Open sense lead protection TEMPERATURE COEFFICIENT (Outputs #1 and 2): 0.03% per degree centigrade COOLING 200 Watt: 15 cfm, 225 lfm airflow required for cooling. OUTPUT ISOLATION Isolated from ground 50 Vdc (leakage current <20 µA) THERMAL PROTECTION Shuts down power supply if overheated. Automatic recovery. STABILITY 0.1% over 8 hours after 30 minutes warm-up. TEMPERATURE RANGE 0 to 40º centigrade at full ratings; derate 2.5% per degree centigrade from 40º to 70º centigrade. Unit will start up at -20º centigrade. TRANSIENT RESPONSE (Outputs #1 and 2): Output voltage returns to within 1% in less than 1 ms for a 50% load change. Peak transient does not exceed 5%. MISCELLANEOUS OVERVOLTAGE PROTECTION (Outputs #1 and #2): Protects load against power supply induced overvoltage. Trip-point is factory set so that output voltage cannot exceed 136% of nominal. Input power must be recycled to reset. OVERLOAD PROTECTION All outputs are protected against overload and short circuit, Automatic recovery upon removal of fault. DEG# SIGNAL : TTL compatible signal. Signal goes low 20ºC before an overtemperature shutdown. FAIL LED : Amber LED illuminates upon a failure condition as per the CPCI and DPCI series specifications. STATUS LED : Green LED illuminates with no presence of any failure condition. REMOTE ENABLE Contact closure to common turns on dc outputs. Recessed pin for “make last, break first” connection. REMOTE INHIBIT Contact closure to the negative sense line or a TTL level “0” turns off dc outputs. SAFETY AGENCY APPROVALS Models are approved to UL1950; CSA 22.2 #234; IEC 950 and TUV EN60950, Class 1 SELV., CE 72/23/EEC/93/68EEC (low voltage directive). GUARANTEED FOR 2 YEARS Two year guarantee includes labor and parts. Guarantee applies to operation at full published specifications at the end of 2 years. OPTIONS: LOW LEAKAGE (CPCI only) “L” option: Leakage current less than 0.5 mA per unit. Will require additional filtering for compliance to EMI specifications. MECHANICAL DIMENSIONS CPCI-204, & DPCI-204 Models: 3U x 8HP W, 160 mm board depth (see outline drawing). Utilizes a 47 pin modular connector in accordance with PICMG® Power Interface Specification 2.11. CPCI-204M, and DPCI-204M Models: 3U x 8HP W, 160 mm board depth (see outline drawing). Utilizes a DIN “M” connector as referenced in the PICMG® Power Interface Specification 2.11. REDUNDANCY Built-in ORing diodes, slope program current sharing on all outputs, and self aligning connector provide hot swap and N+1 capabilities. Current sharing remains within 10% of the unit’s full output rating while units are in thermal equilibrium. REVERSE VOLTAGE Protected against reverse voltage up to supply current rating. except for reverse voltage on output #4 on CPCI-200. 102 Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com CompactPCI® System Power Supplies CPCI-204 & DPCI-204 Models: : 3U x 8HP W, 160 mm board depth Utilizes a 47 pin modular connector in accordance with PICMG® Power Interface Specification 2.11. MECHANICAL DIMENSIONS CPCI-204M & DPCI-204M Models: 3U x 8HP W, 160 mm board depth Utilizes a DIN “M” connector as referenced in the PICMG® Power Interface Specification 2.11. CPCI-204M, DPCI-204M WEIGHT 1.58 LBS .72 KG SIDE VIEW FRONT VIEW 1.59 40.39 REAR VIEW 1.00 .80 1.37 .50 .12 .25 B2 B5 B11 FAULT INPUT CL 6.62 168.14 4.82 1.441 (36.61mm) A13 C13 5.06 128.5 B22 B25 B28 B31 .12 3.930 99.82 PANEL FASTENER M2.5 COLLAR SCREW 4PL. 3U x 8HP EMC FRONT PANEL DIMENSIONS: INCHES MILLIMETERS CPQ400 Model: CPQ400 shown with optional interface board detached Condor D.C. Power Supplies, Inc., 2311 Statham Parkway, Oxnard, CA 93033 800-235-5929 • 805-486-4565 • FAX 805-487-8911 • www.condorpower.com 103